SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2005 (Oct-Dec)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 1896

• Ángel Gómez (megared)
  • Re: ETABS Tue, 25 Oct 2005 16:14:32 -0600

• wsp(--nospam--at)wanadoo.es
  • Translation from German Tue, 4 Oct 2005 03:15:03 -0600
  • Construction cost in Mexico DF Wed, 30 Nov 2005 11:47:22 -0700

• Adolfo Galvez
  • RAM Perform 3D software Tue, 6 Dec 2005 09:29:53 -0700

• Ahmed A.Rahim
  • RE: seismic design with columns into flat slabs? Fri, 16 Dec 2005 11:09:55 -0700

• Ahmed AR.
  • Re: Bill of materials software Tue, 15 Nov 2005 11:02:13 -0700

• Ahmed7100
  • Re: Bill of materials software Tue, 15 Nov 2005 12:18:45 -0700

• akester
  • RE: shear studs Tue, 1 Nov 2005 09:31:15 -0700

• Alden Manipula
  • ACI 302.1R-96 VS. 302.1R-04 Mon, 21 Nov 2005 07:50:33 -0700
  • crack monitor Thu, 1 Dec 2005 08:25:54 -0700
  • RE: crack monitor Thu, 1 Dec 2005 11:45:43 -0700

• Ali Karimzadegan
  • RE: Concrete Shear Wall / Shear Cores Tue, 4 Oct 2005 07:46:42 -0600
  • RE: Concrete Shear Wall / Shear Cores Tue, 4 Oct 2005 08:23:45 -0600

• alireza talebi
  • i need academic computer program for underground storage tank structure Mon, 17 Oct 2005 02:46:27 -0600

• AmerRescue
  • Re: relation b/w peal ground acceleration and Seismic Zones Sun, 16 Oct 2005 17:07:42 -0600
  • Re: relation b/w peal ground acceleration and Seismic Zones Mon, 17 Oct 2005 10:05:35 -0600
  • Re: relation b/w peal ground acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 11:23:24 -0600
  • more relation b/w peal ground acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 14:15:24 -0600
  • Christopher Wright response.acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 14:30:13 -0600
  • Re: Seismic Deflection Criteria for "Penthouses" Tue, 25 Oct 2005 20:02:09 -0600
  • Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 10:51:13 -0600
  • Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 11:40:06 -0600
  • Re: Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 12:22:50 -0600
  • Re: from Doug Copp Sun, 30 Oct 2005 09:47:54 -0700
  • Re: crack monitor Thu, 1 Dec 2005 09:20:36 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 13:47:36 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 18:08:51 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 18:13:26 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 18:39:17 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 18:43:35 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 18:47:48 -0700
  • Re: crack monitor entertainment sent to attorney Thu, 1 Dec 2005 18:55:56 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 19:05:31 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 19:11:26 -0700
  • Re: crack monitor entertainment sheldon karasik Thu, 1 Dec 2005 20:48:16 -0700
  • Re: crack monitor entertainment sheldon karasik Thu, 1 Dec 2005 21:17:50 -0700
  • Re: Fw: crack monitor entertainment Fri, 2 Dec 2005 09:58:50 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 10:07:15 -0700
  • Re: Doug Copp - Mr. Karasik's client Fri, 2 Dec 2005 22:33:19 -0700
  • Response Re: Fw: crack monitor entertainment Fri, 2 Dec 2005 23:27:09 -0700

• Amir Gomma
  • Combined footing Tue, 29 Nov 2005 06:35:21 -0700

• Amy Berg
  • Professional Engineer Job Opportunity in Allegan, MI Wed, 30 Nov 2005 08:06:53 -0700

• Anantha Narayan C.K.
  • Slab Moments in Etabs Thu, 20 Oct 2005 12:53:04 -0600
  • Short tendon in Post-tensioning Tue, 6 Dec 2005 16:21:26 -0700

• Andrew Kester, PE
  • corrosion from ocean flooding Sun, 2 Oct 2005 10:30:31 -0600
  • T shirt... Thu, 13 Oct 2005 07:39:46 -0600
  • t shirts... Fri, 14 Oct 2005 06:40:15 -0600
  • canopy wind loads Fri, 28 Oct 2005 09:43:36 -0600
  • reporting an architect Mon, 7 Nov 2005 09:12:33 -0700
  • Reporting an Arch 2 Wed, 9 Nov 2005 11:36:23 -0700
  • singing and sealing / insurance Fri, 11 Nov 2005 09:57:57 -0700

• Andy Heigley
  • RE: Concrete Shear Wall / Shear Cores Tue, 4 Oct 2005 08:03:15 -0600
  • RE: Florida Dock Design Thu, 8 Dec 2005 09:31:58 -0700

• Andy Richardson
  • Bill of materials software Mon, 14 Nov 2005 11:25:34 -0700
  • non-load bearing gable end walls Wed, 14 Dec 2005 05:59:39 -0700

• Aquino, Jeff
  • RE: Wind velocity Fri, 7 Oct 2005 08:36:02 -0600

• arme
  • dynamic foundations Tue, 20 Dec 2005 09:07:01 -0700
  • Fw: dynamic foundations Tue, 20 Dec 2005 13:46:35 -0700
  • Re: dynamic foundations Tue, 27 Dec 2005 11:26:14 -0700

• Arturo Martinez
  • Re: crack monitor Thu, 1 Dec 2005 10:46:45 -0700

• ASC
  • CORRUGATED DECK Thu, 6 Oct 2005 02:47:18 -0600
  • Light truck against concrete barrier Mon, 14 Nov 2005 01:59:27 -0700
  • SLAB-PILE INTERACTION Tue, 29 Nov 2005 01:48:41 -0700

• Ashraf Manjappara
  • Temperature effect using STAAD Wed, 14 Dec 2005 20:26:13 -0700
  • Column design Thu, 15 Dec 2005 16:47:13 -0700
  • Re: Temperature effect using STAAD Thu, 15 Dec 2005 17:40:04 -0700
  • Re: Column design Fri, 16 Dec 2005 04:57:02 -0700
  • Re: Column design Fri, 16 Dec 2005 08:19:53 -0700
  • Reply for comments on Column design for moments Fri, 16 Dec 2005 08:44:25 -0700
  • Re: Column design Sat, 17 Dec 2005 13:17:01 -0700
  • Moment releases for RCC beam to beam connection in STAAD Thu, 22 Dec 2005 10:31:48 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Fri, 23 Dec 2005 10:40:54 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Fri, 23 Dec 2005 10:49:37 -0700
  • Acre in SI Fri, 23 Dec 2005 11:25:32 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Mon, 26 Dec 2005 12:13:57 -0700
  • Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 08:25:54 -0700
  • Re: Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 21:01:03 -0700
  • Re: Footing design Fri, 30 Dec 2005 06:08:09 -0700

• ASLCSE
  • Re: California contract law Tue, 1 Nov 2005 16:09:46 -0700
  • Re: California contract law Thu, 3 Nov 2005 12:10:07 -0700
  • Re: California contract law BORPELS Mon, 7 Nov 2005 10:22:20 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 11:07:25 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 11:28:38 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 11:33:21 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 12:49:15 -0700
  • Re: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 13:02:11 -0700
  • Re: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 14:03:22 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 17:30:03 -0700
  • Re: reporting an architect Wed, 9 Nov 2005 10:26:46 -0700
  • Re: Jumping to Conclusions Wed, 9 Nov 2005 10:46:04 -0700
  • Re: Reporting an Arch 2 Wed, 9 Nov 2005 12:00:43 -0700
  • Re: California contract law BORPELS Wed, 9 Nov 2005 12:15:45 -0700
  • Re: Reporting an Arch 2 Wed, 9 Nov 2005 12:33:48 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 16:27:28 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 16:58:42 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 18:23:48 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 18:31:34 -0700
  • Re: Moment frames / wood construction Mon, 14 Nov 2005 20:23:50 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 11:21:34 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 5 Dec 2005 10:47:58 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 6 Dec 2005 10:50:29 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 6 Dec 2005 18:54:09 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 10:11:18 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 11:02:50 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 11:23:09 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 11:47:07 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 12:08:34 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 13:57:46 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 11:10:51 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 14:58:36 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 16:13:54 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 23:47:14 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 14 Dec 2005 12:52:46 -0700

• ASQENGG2
  • Re: Masonry Special Inspection Thu, 6 Oct 2005 02:44:11 -0600
  • Re: redwood gazebo Tue, 6 Dec 2005 13:13:39 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 6 Dec 2005 14:28:17 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 19:30:15 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 18:25:26 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 22:14:44 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 00:09:53 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 00:36:27 -0700
  • Re: Pole-Type Footing in Seismic Zone 3 (1997 UBC) Thu, 15 Dec 2005 01:02:31 -0700
  • Re: Column design Sat, 17 Dec 2005 12:02:52 -0700
  • Re: Column design Mon, 19 Dec 2005 11:58:01 -0700
  • Re: Column design Tue, 20 Dec 2005 16:42:56 -0700
  • Re: Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 10:34:47 -0700
  • Re: Column Design Fri, 30 Dec 2005 10:53:40 -0700
  • Re: Footing design Fri, 30 Dec 2005 14:22:16 -0700

• ASTANEH-ASL, Abolhassan, Professor, UC-Berkeley
  • Bam-Iran Renewal Seminar on Dec 1, 3:30-5:00 Berkeley Campus Fri, 25 Nov 2005 18:17:49 -0700

• Aswin Rangaswamy
  • Re: Exam de-briefing Thu, 3 Nov 2005 17:39:19 -0700
  • Re: CA Seismic Principles and Engineering Surveying Exam Tue, 15 Nov 2005 10:18:42 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 10:23:03 -0700

• Auge, Ken
  • RE: Exam de-briefing Wed, 2 Nov 2005 17:27:11 -0700
  • RE: Exam de-briefing Thu, 3 Nov 2005 08:39:46 -0700
  • Cement Pricing for January, 2006? Tue, 27 Dec 2005 13:49:49 -0700
  • RE: Cement Pricing for January, 2006? Thu, 29 Dec 2005 14:23:32 -0700

• aux97
  • Re: Light truck against concrete barrier Tue, 15 Nov 2005 12:10:09 -0700

• Avicpeng
  • Re: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 13:07:26 -0700
  • BC/Alberta Engineer Wed, 9 Nov 2005 16:24:32 -0700
  • Re: Moment frames / wood construction Mon, 14 Nov 2005 20:37:38 -0700
  • Re: Bill of materials software Tue, 15 Nov 2005 09:04:35 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 13:43:02 -0700
  • Long Runs of Tilt-up Panels Wed, 16 Nov 2005 19:34:11 -0700
  • Tilt-up & At-a-Distance task monitoring Thu, 17 Nov 2005 10:57:08 -0700
  • Re: At-a-Distance task monitoring Fri, 18 Nov 2005 16:21:31 -0700
  • Re: crack monitor entertainment sheldon karasik Thu, 1 Dec 2005 21:33:40 -0700
  • Re: crack monitor entertainment sheldon karasik Fri, 2 Dec 2005 09:03:43 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 13:01:22 -0700
  • Re: interesting article in today's LA Times Fri, 2 Dec 2005 13:08:05 -0700
  • Re: SI Metric Wed, 21 Dec 2005 17:57:46 -0700
  • Re: SI Metric Wed, 21 Dec 2005 19:35:28 -0700
  • Re: OT - Business credit card Sat, 24 Dec 2005 10:50:28 -0700
  • Folding Plate Fri, 30 Dec 2005 13:24:17 -0700
  • Re: Folding Plate Fri, 30 Dec 2005 16:09:35 -0700

• AWC Info
  • FW: Ceiling joists/rafter ties IRC R802.3.1 Wed, 5 Oct 2005 07:48:44 -0600
  • CALL FOR TECHNICAL SESSION (FORMAL) PRESENTATIONS Thu, 27 Oct 2005 10:29:41 -0600
  • RE: Perforated shear walls - IBC 2305.3.7.2 Thu, 10 Nov 2005 13:39:24 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Fri, 11 Nov 2005 05:58:11 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 06:45:45 -0700
  • redwood gazebo Tue, 6 Dec 2005 07:48:54 -0700
  • non-load bearing gable end walls Tue, 13 Dec 2005 07:59:20 -0700

• Barry H. Welliver
  • RE: LA Times Article - Vulnerable Concrete Buildings Tue, 11 Oct 2005 15:50:45 -0600
  • RE: LA Times Article - Vulnerable Concrete Buildings Wed, 12 Oct 2005 14:17:00 -0600
  • RE: reporting an architect Mon, 7 Nov 2005 10:14:30 -0700

• BCainse
  • Re: dock design Wed, 5 Oct 2005 22:41:12 -0600
  • Re: Welding to Old Steel Mon, 17 Oct 2005 17:42:17 -0600
  • Re: Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 12:04:53 -0600
  • Re: EX-CITY ENGINEER SUED IN FLOODING Thu, 27 Oct 2005 09:10:13 -0600
  • Re: Doug Copp Sun, 30 Oct 2005 09:09:18 -0700
  • Re: Roof Gathering Area Mon, 31 Oct 2005 12:55:06 -0700
  • Re: California contract law Tue, 1 Nov 2005 17:38:14 -0700
  • Re: California contract law Tue, 1 Nov 2005 23:04:03 -0700
  • Re: Exam de-briefing Wed, 2 Nov 2005 17:44:11 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 16:06:38 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 20:43:48 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 21:04:17 -0700
  • Re: Signing & Sealing Drawings Thu, 10 Nov 2005 15:57:00 -0700
  • Re: Signing & Sealing Drawings Fri, 11 Nov 2005 13:17:10 -0700
  • Re: Moment frames / wood construction Thu, 17 Nov 2005 09:27:47 -0700
  • Re: Combined footing Tue, 29 Nov 2005 10:45:08 -0700
  • Re: Combined footing Tue, 29 Nov 2005 12:43:25 -0700
  • Re: ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 16:02:19 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 19:04:37 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 11:54:50 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 12:53:09 -0700
  • Re: Foundation Soil Characteristics by Surface Wave Sounding Fri, 2 Dec 2005 14:42:06 -0700
  • Re: Concrete floor on wood trusses Tue, 6 Dec 2005 17:53:48 -0700
  • Bamboo Reinforcement (was Re: Concrete floor on wood trusses) Tue, 6 Dec 2005 23:04:09 -0700
  • Re: Bamboo Reinforcement (was Re: Concrete floor on wood trusses) Wed, 7 Dec 2005 12:32:16 -0700
  • Re: Decision Makers [WAS: Marketing Strategies] Mon, 12 Dec 2005 17:33:16 -0700
  • Re: moonlighting Tue, 13 Dec 2005 08:10:55 -0700
  • Re: moonlighting Tue, 13 Dec 2005 17:46:37 -0700
  • Re: Drive Screw Nails? Tue, 13 Dec 2005 20:55:25 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 23:00:10 -0700
  • AISC 13th Edition Wed, 28 Dec 2005 11:42:21 -0700
  • Re: Old Glu-Lam Combinations Thu, 29 Dec 2005 13:35:41 -0700
  • Re: Retaining Wall Surcharge Formula Thu, 29 Dec 2005 23:21:54 -0700
  • Re: AISC 13th Edition Thu, 29 Dec 2005 23:30:46 -0700

• Ben Yousefi
  • RE: 1 Hr Firewall UBC or HUD Thu, 13 Oct 2005 09:05:08 -0600
  • RE: Tue, 25 Oct 2005 13:13:22 -0600
  • RE: Roof Gathering Area Mon, 31 Oct 2005 11:53:02 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 08:40:48 -0700
  • interesting article in today's LA Times Fri, 2 Dec 2005 10:07:34 -0700
  • RE: And you think you have plan check problems... Thu, 8 Dec 2005 16:08:03 -0700
  • RE: IBC 2305.1.5 Tue, 13 Dec 2005 16:52:18 -0700
  • RE: fema 350 Mon, 19 Dec 2005 10:34:15 -0700
  • RE: fema 350 Mon, 19 Dec 2005 13:10:28 -0700
  • RE: FEMA 350 & ANSI/AISC 358-05 Mon, 19 Dec 2005 17:28:54 -0700
  • RE: FEMA 350 & ANSI/AISC 358-05 Tue, 20 Dec 2005 08:47:58 -0700

• Benjamin Cornelius
  • RE: moonlighting Tue, 13 Dec 2005 14:42:09 -0700

• Bernard, Scott C.
  • Florida Dock Design Thu, 8 Dec 2005 08:43:03 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 07:13:37 -0700

• Bhavin Shah
  • Dynamic analysis of Table top foundation Mon, 10 Oct 2005 09:21:39 -0600
  • Forces due to Frost Effects Mon, 17 Oct 2005 07:51:43 -0600
  • Re: Dynamic analysis of Table top foundation Mon, 17 Oct 2005 08:04:52 -0600
  • Re: Dynamic analysis of Table top foundation Tue, 18 Oct 2005 07:30:47 -0600
  • Solid elements Mon, 28 Nov 2005 10:22:05 -0700
  • Re: SLAB-PILE INTERACTION Tue, 29 Nov 2005 10:43:18 -0700
  • Interface require for large Reciprocating Compressor Thu, 22 Dec 2005 10:10:43 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Fri, 23 Dec 2005 07:12:40 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Mon, 26 Dec 2005 09:01:15 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Tue, 27 Dec 2005 09:03:43 -0700

• Bill Allen
  • Seismic Deflection Criteria for "Penthouses" Tue, 25 Oct 2005 13:16:36 -0600
  • RE: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 06:56:30 -0600
  • Precast Site Walls Wed, 26 Oct 2005 07:12:53 -0600
  • RE: Precast Site Walls Wed, 26 Oct 2005 08:34:22 -0600
  • RE: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 14:29:35 -0600
  • Control Joints in a Mat Foundation Thu, 27 Oct 2005 13:29:40 -0600
  • RE: Control Joints in a Mat Foundation Thu, 27 Oct 2005 14:03:11 -0600
  • RE: Control Joints in a Mat Foundation Fri, 28 Oct 2005 07:59:52 -0600
  • RE: Roof Gathering Area Mon, 31 Oct 2005 12:41:12 -0700
  • RE: Roof Gathering Area Mon, 31 Oct 2005 16:29:53 -0700
  • RE: Base isolation for homes? Fri, 4 Nov 2005 09:37:30 -0700
  • Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 12:42:42 -0700
  • RE: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 13:08:04 -0700
  • RE: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 13:17:10 -0700
  • UBC 1632.2 Shallow Anchors Question Mon, 28 Nov 2005 10:25:29 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Mon, 28 Nov 2005 16:41:38 -0700
  • RE: Wood Roof Truss Issues Tue, 6 Dec 2005 05:56:31 -0700
  • Drive Screw Nails? Tue, 13 Dec 2005 15:17:02 -0700
  • RE: Drive Screw Nails? Tue, 13 Dec 2005 15:48:38 -0700
  • Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 19:21:42 -0700
  • RE: Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 20:20:06 -0700
  • Informal Poll Thu, 15 Dec 2005 11:10:47 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 09:15:04 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 10:42:14 -0700
  • RE: fema 350 Mon, 19 Dec 2005 11:35:15 -0700
  • RE: fema 350 Mon, 19 Dec 2005 13:17:56 -0700
  • Pipe Protection Below Mat Foundations Wed, 21 Dec 2005 11:10:45 -0700
  • RE: SI Metric Fri, 23 Dec 2005 11:15:40 -0700
  • Retaining Wall Surcharge Formula Wed, 28 Dec 2005 16:16:46 -0700
  • RE: Retaining Wall Surcharge Formula Thu, 29 Dec 2005 20:07:24 -0700

• Bob Immel
  • RE: Allowable Stress Design of a Concrete Beam Fri, 14 Oct 2005 11:18:30 -0600
  • RE: Your Opinion? Thu, 10 Nov 2005 17:40:48 -0700

• Brad Byrom
  • Live Load Reduction, IRC 2003 Tue, 15 Nov 2005 06:23:24 -0700
  • Re: Minimum Steel Beam Bearing Tue, 29 Nov 2005 05:44:59 -0700
  • RE: non-load bearing gable end walls Tue, 13 Dec 2005 05:20:52 -0700
  • moonlighting Tue, 13 Dec 2005 06:24:32 -0700

• Brashears, Erich
  • Old "UTD #5" Tie Down Capacity Thu, 15 Dec 2005 09:07:41 -0700

• Brian K. Smith
  • Re: Roof Gathering Area Mon, 31 Oct 2005 12:08:29 -0700

• Brian K. Smith, P.E.
  • Re: Vent holes in BCI blocking Fri, 9 Dec 2005 05:07:41 -0700

• Bruce Holcomb
  • wind on steel frames without cladding Mon, 3 Oct 2005 08:04:07 -0600
  • RE: 2x T&G decking Wed, 5 Oct 2005 15:39:38 -0600
  • FW: Slab Moments in Etabs Thu, 20 Oct 2005 15:45:22 -0600
  • RE: ETABS Tue, 25 Oct 2005 15:46:12 -0600
  • RE: crack monitor Thu, 1 Dec 2005 08:35:34 -0700
  • RE: Thermally Cut Bolt Holes Thu, 1 Dec 2005 11:43:16 -0700
  • RE: Hooked anchor bolts Tue, 20 Dec 2005 10:43:09 -0700

• Burke Maureen J Ctr AEDC/ATA
  • ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 10:09:47 -0700

• BYRON . K . CHILDS
  • BYRON K CHILDS/Sargentlundy is out of the office. Sat, 26 Nov 2005 03:02:44 -0700

• Caldwell, Stan
  • RE: dock design Wed, 5 Oct 2005 14:10:50 -0600
  • My Talking Stick Experience Fri, 4 Nov 2005 16:42:32 -0700
  • RE: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 08:49:55 -0700
  • Way Off Topic: Holiday Humor Thu, 8 Dec 2005 14:23:14 -0700
  • OT: Seasons Greetings Thu, 22 Dec 2005 11:19:48 -0700
  • RE: Obscure Units Tue, 27 Dec 2005 17:06:22 -0700

• Candi Anderson
  • Re: Shared footings Fri, 2 Dec 2005 16:08:58 -0700
  • Re: Shared Footings Fri, 2 Dec 2005 17:22:46 -0700
  • Re: Bridge Specs Wed, 14 Dec 2005 20:22:54 -0700

• Candi Anderson
  • MathCad Tue, 4 Oct 2005 07:22:20 -0600
  • RE: Coefficient of thermal expansion - steel Thu, 13 Oct 2005 08:36:07 -0600
  • CRSI Code (or Manual) of Standard Practice Wed, 2 Nov 2005 09:04:56 -0700
  • Seismic Design of Pedestrian Bridges Wed, 23 Nov 2005 14:20:42 -0700
  • Seismic Design Wed, 30 Nov 2005 15:06:34 -0700
  • RE: Doug Copp Fri, 2 Dec 2005 11:10:24 -0700
  • Shared footings Fri, 2 Dec 2005 13:30:02 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Thu, 8 Dec 2005 08:30:08 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Wed, 21 Dec 2005 06:43:32 -0700

• Carlos Avila
  • RE: Allowable Stress Design of a Concrete Beam Sun, 16 Oct 2005 18:04:01 -0600

• Carter, Charlie
  • RE: The 13th Ed. of AISC Manual Mon, 19 Dec 2005 07:56:09 -0700
  • RE: The 13th Ed. of AISC Manual Mon, 19 Dec 2005 10:28:27 -0700
  • RE: New AISC Steel Spec Thu, 29 Dec 2005 15:32:33 -0700
  • RE: AISC 13th Edition Thu, 29 Dec 2005 15:46:08 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 08:32:15 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 09:40:37 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 11:54:45 -0700
  • RE: Folding Plate Fri, 30 Dec 2005 14:36:07 -0700
  • RE: Details Fri, 30 Dec 2005 19:43:29 -0700

• Casey K Hemmatyar
  • California: National SE II exam administered twice a year Wed, 30 Nov 2005 15:28:54 -0700

• Casey K. Hemmatyar
  • RE: Seismic Design of Pedestrian Bridges Wed, 23 Nov 2005 15:40:50 -0700
  • RE: ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 11:07:29 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 12:36:59 -0700
  • Happy Holidays "Structural Plans" Fri, 16 Dec 2005 12:45:20 -0700
  • RE: Happy Holidays "Structural Plans" Tue, 20 Dec 2005 18:19:36 -0700
  • RE: SI Metric Wed, 21 Dec 2005 18:07:28 -0700
  • RE: Non-orthogonal lateral system Wed, 21 Dec 2005 18:21:59 -0700
  • RE: SI Metric Fri, 23 Dec 2005 17:16:07 -0700

• Catherine Pagni
  • RE: LA Times Article - Vulnerable Concrete Buildings Wed, 12 Oct 2005 12:59:15 -0600

• Chance, Acie
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 12:16:24 -0600
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 08:41:15 -0600
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 13:14:57 -0600
  • RE: half height steel nuts Thu, 17 Nov 2005 11:34:57 -0700
  • RE: wrong crack monitor Thu, 1 Dec 2005 14:28:00 -0700
  • RE: crack monitor entertainment Fri, 2 Dec 2005 10:33:12 -0700
  • RE: redwood gazebo Mon, 5 Dec 2005 12:48:08 -0700
  • RE: CMU in water/wastewater Wed, 14 Dec 2005 19:06:42 -0700

• Charley Hamilton
  • Re: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 17:03:11 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 17:38:00 -0700

• Chris Towne
  • RE: PEMB - Tie Beam Thu, 6 Oct 2005 08:16:16 -0600
  • RE: CMU in water/wastewater Wed, 14 Dec 2005 17:50:33 -0700
  • Bridge Specs Wed, 14 Dec 2005 19:50:43 -0700

• Christopher
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 15:19:39 -0600
  • overturning Sun, 9 Oct 2005 20:04:28 -0600
  • common rebar grade Fri, 14 Oct 2005 06:46:26 -0600
  • RE: questions about ASTM E1300-04 Mon, 5 Dec 2005 14:55:21 -0700
  • RE: Wood Roof Truss Issues Wed, 7 Dec 2005 07:47:34 -0700
  • Wood Roof Truss Issues Wed, 7 Dec 2005 09:58:42 -0700

• Christopher Wright
  • Re: ENERCALC Sat, 1 Oct 2005 11:49:27 -0600
  • Re: ENERCALC Sat, 1 Oct 2005 13:10:43 -0600
  • Re: Modeling Techniques (deck) Wed, 5 Oct 2005 13:11:33 -0600
  • Re: dock design Wed, 5 Oct 2005 13:28:01 -0600
  • Re: Stainless Steel Mon, 10 Oct 2005 08:40:09 -0600
  • Re: Stainless Steel Mon, 10 Oct 2005 22:05:24 -0600
  • Re: Coefficient of thermal expansion - steel Thu, 13 Oct 2005 10:06:22 -0600
  • Re: roark's stress and strain Thu, 13 Oct 2005 18:43:09 -0600
  • Re: roark's formula's Fri, 14 Oct 2005 09:35:16 -0600
  • Re: Dynamic analysis of Table top foundation Mon, 17 Oct 2005 08:36:34 -0600
  • Re: relation b/w peal ground acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 11:55:53 -0600
  • Re: Welding to Old Steel Mon, 17 Oct 2005 20:57:33 -0600
  • Re: Welding to Old Steel Mon, 17 Oct 2005 21:26:17 -0600
  • Re: Tue, 25 Oct 2005 14:40:37 -0600
  • Re: Welding High Strength Bolts Wed, 26 Oct 2005 09:34:29 -0600
  • Re: Modeling Helipad with Springs Fri, 4 Nov 2005 13:55:26 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 11:10:26 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 16:42:59 -0700
  • Re: Modeling Helipad with Springs Mon, 7 Nov 2005 22:06:17 -0700
  • Re: reporting an architect Wed, 9 Nov 2005 12:07:09 -0700
  • Re: Chart Excel For Engineering Usage Sun, 13 Nov 2005 23:02:58 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 19:16:05 -0700
  • Re: half height steel nuts Thu, 17 Nov 2005 14:33:34 -0700
  • Re: Solid elements Mon, 28 Nov 2005 20:02:10 -0700
  • Re: Combined footing Tue, 29 Nov 2005 10:58:28 -0700
  • Re: SLAB-PILE INTERACTION Tue, 29 Nov 2005 11:06:54 -0700
  • Re: Conc. Tilt-up w/ crane loads Wed, 30 Nov 2005 09:52:57 -0700
  • Re: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 09:14:42 -0700
  • Re: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 09:55:54 -0700
  • Re: Thermally Cut Bolt Holes Thu, 1 Dec 2005 13:21:17 -0700
  • Re: Thermally Cut Bolt Holes Thu, 1 Dec 2005 16:56:49 -0700
  • Re: Follow Up on Vertical Component of EQ in UBC97 and IBC2000 Fri, 2 Dec 2005 09:45:19 -0700
  • Re: Thermally Cut Bolt Holes Fri, 2 Dec 2005 11:25:02 -0700
  • Re: Thermally Cut Bolt Holes Fri, 2 Dec 2005 14:51:38 -0700
  • Re: interesting article in today's LA Times Tue, 6 Dec 2005 08:43:22 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 12:00:59 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 22:15:15 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 10:05:38 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 14:31:06 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 08:42:43 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 11:33:39 -0700
  • Re: Publications or Programs on Marketing Strategies Mon, 12 Dec 2005 11:50:16 -0700
  • Re: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 15:00:35 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 17:57:50 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:48:36 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 20:09:40 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 21:18:01 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 17 Dec 2005 10:19:05 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 17 Dec 2005 19:32:43 -0700
  • Re: Macintel [was Microsoft Word format screw-up---Help!] Sun, 18 Dec 2005 13:05:26 -0700
  • Re: Macintel [was Microsoft Word format screw-up---Help!] Sun, 18 Dec 2005 22:56:31 -0700
  • Re: Costly seminars and Code corrections Mon, 19 Dec 2005 16:41:42 -0700
  • Re: Costly seminars and Code corrections Mon, 19 Dec 2005 20:47:38 -0700
  • Re: The 13th Ed. of AISC Manual Thu, 22 Dec 2005 09:47:24 -0700
  • Re: SI Metric Thu, 22 Dec 2005 09:52:56 -0700
  • Re: SI Metric Thu, 22 Dec 2005 12:11:52 -0700
  • Re: SI Metric Fri, 23 Dec 2005 08:34:48 -0700
  • Re: SI Metric Sat, 24 Dec 2005 10:46:57 -0700
  • Re: SI Metric Sat, 24 Dec 2005 11:02:08 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Tue, 27 Dec 2005 10:00:10 -0700
  • Re: SI Metric Wed, 28 Dec 2005 12:50:06 -0700
  • Re: SI Metric Wed, 28 Dec 2005 12:56:23 -0700
  • Re: New AISC Steel Spec Wed, 28 Dec 2005 19:56:51 -0700
  • Re: Folding Plate Fri, 30 Dec 2005 17:54:47 -0700

• Chuck Ritter
  • RE: Coefficient of thermal expansion - steel Thu, 13 Oct 2005 10:44:48 -0600
  • RE: Dynamic analysis of Table top foundation Tue, 18 Oct 2005 09:59:32 -0600
  • RE: upside down base plate Thu, 3 Nov 2005 10:01:00 -0700
  • Re: Moment frames / wood construction Wed, 16 Nov 2005 09:17:03 -0700

• chuck utzman
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 16:44:17 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 19:09:38 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Thu, 10 Nov 2005 13:58:51 -0700
  • Re: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:01:23 -0700
  • Re: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:37:54 -0700
  • Re: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 13:31:58 -0700
  • Re: half height steel nuts Thu, 17 Nov 2005 14:41:42 -0700
  • Re: Tilt-up & At-a-Distance task monitoring Thu, 17 Nov 2005 14:43:37 -0700
  • Re: basement sealant (Scott Haan) Thu, 17 Nov 2005 19:22:39 -0700
  • Re: redwood gazebo Tue, 6 Dec 2005 14:24:07 -0700

• Clint B. Albunian
  • steel beam and column connection Thu, 1 Dec 2005 19:13:41 -0700
  • Steel beam and column connection Mon, 5 Dec 2005 03:41:57 -0700

• Collier, Randy
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 07:24:49 -0700

• Dan Morrow
  • RE: Gypsum board for bracing in 03 IBC Seismic Design Category D Tue, 4 Oct 2005 13:52:11 -0600
  • RE: overturning Mon, 10 Oct 2005 14:47:44 -0600
  • RE: Doug Copp Fri, 2 Dec 2005 17:44:59 -0700

• Daniel Popp
  • Seismic Detailing of Column Lap Splices Thu, 17 Nov 2005 11:06:11 -0700

• Daryl Richardson
  • Re: wind on steel frames without cladding Mon, 3 Oct 2005 08:48:57 -0600
  • Re: Pile Modelling in CSI SAFE Tue, 11 Oct 2005 09:50:58 -0600
  • Re: Forces due to Frost Effects Mon, 17 Oct 2005 11:06:07 -0600
  • Re: Control Joints in a Mat Foundation Thu, 27 Oct 2005 16:29:56 -0600
  • Re: Control Joints in a Mat Foundation Thu, 27 Oct 2005 23:42:31 -0600
  • Re: Roof Gathering Area Tue, 1 Nov 2005 09:25:44 -0700
  • Re: seaint Digest for 30 Oct 2005 Wed, 2 Nov 2005 23:45:05 -0700
  • Re: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 17:50:00 -0700
  • Re: Signing & Sealing Drawings Fri, 11 Nov 2005 10:06:34 -0700
  • Re: Signing & Sealing Drawings Fri, 11 Nov 2005 14:56:10 -0700
  • Re: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:27:43 -0700
  • Re: Solid elements Mon, 28 Nov 2005 12:18:19 -0700
  • Re: SLAB-PILE INTERACTION Tue, 29 Nov 2005 09:44:11 -0700
  • Re: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 15:28:35 -0700
  • Re: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 08:55:36 -0700
  • Re: SLAB-PILE INTERACTION Thu, 1 Dec 2005 10:21:06 -0700
  • Re: crack monitor Thu, 1 Dec 2005 13:03:01 -0700
  • Re: Foundation Soil Characteristics by Surface Wave Sounding Fri, 2 Dec 2005 13:56:40 -0700
  • Re: Shared footings Sat, 3 Dec 2005 21:52:36 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 09:03:13 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 15:59:01 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 10:37:09 -0700
  • Re: Publications or Programs on Marketing Strategies Mon, 12 Dec 2005 13:18:12 -0700
  • Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 14:07:30 -0700
  • Re: non-load bearing gable end walls Tue, 13 Dec 2005 09:18:33 -0700
  • Re: moonlighting Tue, 13 Dec 2005 12:14:48 -0700
  • Re: Pipe Protection Below Mat Foundations Wed, 21 Dec 2005 15:44:58 -0700
  • Complements of the Season to All Thu, 22 Dec 2005 14:57:30 -0700
  • Obscure Units Fri, 23 Dec 2005 08:56:30 -0700
  • Re: SI Metric Fri, 23 Dec 2005 10:37:19 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Mon, 26 Dec 2005 11:54:17 -0700
  • Re: Obscure Units Tue, 27 Dec 2005 10:20:44 -0700
  • Re: Obscure Units Tue, 27 Dec 2005 11:27:20 -0700
  • Re: Obscure Units Tue, 27 Dec 2005 17:23:15 -0700
  • Re: Sulfate Attack Wed, 28 Dec 2005 14:20:02 -0700
  • Re: Old Glu-Lam Combinations Thu, 29 Dec 2005 12:05:11 -0700

• Dave Adams
  • RE: rock veneer support in residential construction Fri, 28 Oct 2005 10:54:00 -0600
  • Garbage truck incident in Illinois Thu, 10 Nov 2005 13:26:22 -0700
  • Pole-Type Footing in Seismic Zone 3 (1997 UBC) Wed, 14 Dec 2005 17:34:56 -0700
  • San Juan Del Rio in the state of Queretaro, Mexico Fri, 30 Dec 2005 15:05:24 -0700

• Dave Handy
  • Re: Concrete Shear Wall / Shear Cores Tue, 4 Oct 2005 07:28:17 -0600
  • Re: Control Joints in a Mat Foundation Thu, 27 Oct 2005 15:00:42 -0600
  • Re: Tilt-up & At-a-Distance task monitoring Thu, 17 Nov 2005 11:39:19 -0700
  • Re: basement sealant (Scott Haan) and further questions Fri, 18 Nov 2005 09:22:37 -0700
  • sj joists? - rusting of top chords Mon, 28 Nov 2005 13:09:52 -0700
  • Re: sj joists? - rusting of top chords Tue, 29 Nov 2005 09:36:12 -0700

• dave lowen
  • RE: ENERCALC Sat, 1 Oct 2005 08:40:29 -0600
  • RE: reporting an architect Mon, 7 Nov 2005 16:58:25 -0700
  • RE: crack monitor entertainment sheldon karasik Fri, 2 Dec 2005 06:55:47 -0700
  • RE: Doug Copp Fri, 2 Dec 2005 12:12:20 -0700
  • RE: Fwd: Doug Copp - Mr. Karasik's client Fri, 2 Dec 2005 18:18:31 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 05:15:31 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 06:57:37 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 05:29:35 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 18:54:27 -0700
  • RE: SI Metric Thu, 22 Dec 2005 06:40:07 -0700
  • Details Fri, 30 Dec 2005 19:01:18 -0700

• David Adie
  • tick tock Tue, 18 Oct 2005 15:45:45 -0600
  • RE: Composite Girders Tue, 22 Nov 2005 10:38:02 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 13:33:26 -0700

• David Fisher
  • RE: Prison Break Wed, 5 Oct 2005 13:59:26 -0600
  • RE: Coefficient of thermal expansion - steel Thu, 13 Oct 2005 08:33:37 -0600
  • RE: T shirt... Thu, 13 Oct 2005 08:52:30 -0600
  • OT: plotter for sale... Tue, 18 Oct 2005 15:27:23 -0600
  • OT: plotter Wed, 19 Oct 2005 08:06:27 -0600
  • RE: crack monitor entertainment Thu, 1 Dec 2005 15:47:32 -0700
  • RE: Doug Copp Fri, 2 Dec 2005 13:20:26 -0700
  • WARNING - OFF TOPIC...QUESTIONABLE LANGUAGE!!!!!!!!!!! Fri, 2 Dec 2005 13:39:13 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 16:27:52 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 13:03:23 -0700

• David Maynard
  • RE: Dented light pole Wed, 5 Oct 2005 13:11:23 -0600
  • RE: Prison Break Wed, 5 Oct 2005 16:38:08 -0600
  • RE: Prison Break Thu, 6 Oct 2005 06:32:37 -0600
  • RE: PEMB - Tie Beam Thu, 6 Oct 2005 08:29:11 -0600
  • PEMB - Tie Beam Thu, 6 Oct 2005 08:38:33 -0600
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 09:40:59 -0600
  • RE: tick tock Tue, 18 Oct 2005 16:32:05 -0600
  • RE: Roof Gathering Area Mon, 31 Oct 2005 11:54:17 -0700
  • RE: Your Opinion? Fri, 11 Nov 2005 09:00:00 -0700
  • RE: Your Opinion? Fri, 11 Nov 2005 11:53:57 -0700
  • RE: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:09:34 -0700
  • RE: ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 10:26:15 -0700
  • AISI Cold Formed Steel Design Thu, 8 Dec 2005 14:49:46 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 14:58:57 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 16:36:27 -0700
  • RE: Happy Holidays "Structural Plans" Fri, 16 Dec 2005 13:28:31 -0700
  • RE: Column Design Thu, 29 Dec 2005 07:58:09 -0700

• David Merrick
  • RE: Gypsum board for bracing in 03 IBC Seismic Design Category D Thu, 6 Oct 2005 15:10:07 -0600
  • Re: Minimum Steel Beam Bearing Wed, 30 Nov 2005 11:38:38 -0700
  • Re: crack monitor Fri, 2 Dec 2005 11:42:09 -0700
  • Costly seminars and Code corrections Mon, 19 Dec 2005 12:46:29 -0700
  • Re: Non-orthogonal lateral system Thu, 22 Dec 2005 11:55:46 -0700
  • Re: Non-orthogonal lateral system con't Thu, 22 Dec 2005 12:54:35 -0700
  • Non-orthogonal lateral system con't2 Thu, 22 Dec 2005 13:04:01 -0700
  • Old Earthquake Book for whom? Wed, 28 Dec 2005 18:23:37 -0700

• David Phillips
  • RE: Fixed Ladder Dimensions Fri, 4 Nov 2005 07:36:32 -0700

• David Smith
  • Concrete at sign pole base Tue, 25 Oct 2005 12:27:38 -0600
  • Re: Concrete at sign pole base Wed, 26 Oct 2005 07:28:13 -0600
  • Re: MODERATOR WARNING: Please Stop Doug Copp thread Sun, 4 Dec 2005 06:46:32 -0700
  • Concrete floor on wood trusses Tue, 6 Dec 2005 15:08:47 -0700
  • Re: Concrete floor on wood trusses Wed, 7 Dec 2005 07:58:08 -0700
  • Re: Concrete floor on wood trusses Wed, 7 Dec 2005 08:09:11 -0700

• David Topete
  • Re: Civil Engineering T-shirt available Thu, 13 Oct 2005 10:19:19 -0600
  • Re: tick tock Tue, 18 Oct 2005 16:27:46 -0600
  • Re: tick tock Wed, 19 Oct 2005 09:29:37 -0600
  • Re: Tue, 25 Oct 2005 12:52:18 -0600
  • Re: Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 12:32:31 -0600
  • Good luck to test takers Wed, 26 Oct 2005 13:01:05 -0600
  • Exam de-briefing Wed, 2 Nov 2005 08:55:48 -0700
  • Re: Exam de-briefing Wed, 2 Nov 2005 15:22:57 -0700
  • Re: Job Vacancy -- in Nigeria Wed, 9 Nov 2005 14:40:50 -0700
  • Re: Shear corresponding to the development of the "nominal flexure strength" SEISMIC Manual V1 Thu, 10 Nov 2005 09:44:50 -0700
  • RE: seaint Digest for 9 Nov 2005 Thu, 10 Nov 2005 09:52:16 -0700
  • Re: UBC 1633.2.6 Wed, 30 Nov 2005 10:02:31 -0700
  • RE: Seismic Design Wed, 30 Nov 2005 16:20:34 -0700
  • RE: Seismic Design Wed, 30 Nov 2005 16:41:28 -0700
  • Re: Fw: crack monitor entertainment Fri, 2 Dec 2005 11:34:41 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 13:09:37 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 13:48:33 -0700
  • Re: WARNING - OFF TOPIC...QUESTIONABLE LANGUAGE!!!!!!!!!!! Fri, 2 Dec 2005 14:36:54 -0700
  • Re: questions about ASTM E1300-04 Mon, 5 Dec 2005 14:37:21 -0700
  • RE: Concrete floor on wood trusses Tue, 6 Dec 2005 18:36:52 -0700
  • Re: Concrete floor on wood trusses Wed, 7 Dec 2005 09:16:14 -0700
  • RE: Concrete floor on wood trusses Wed, 7 Dec 2005 10:03:08 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 09:28:56 -0700
  • Re: moonlighting Tue, 13 Dec 2005 09:59:26 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 11:10:38 -0700
  • RE: moonlighting Tue, 13 Dec 2005 14:25:21 -0700
  • OT: RHK is published Tue, 13 Dec 2005 14:28:43 -0700
  • Re: moonlighting Tue, 13 Dec 2005 14:59:51 -0700
  • Re: OT: RHK is published Wed, 14 Dec 2005 09:43:25 -0700
  • Re: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 12:16:08 -0700
  • Re: concrete topping? on metal deck over timber structure. Thu, 15 Dec 2005 09:45:26 -0700
  • Re: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 11:15:12 -0700
  • Re: Obscure Units Fri, 23 Dec 2005 09:17:19 -0700
  • RE: Old Earthquake Book for whom? Thu, 29 Dec 2005 08:45:09 -0700

• davisp2
  • Re: Welding High Strength Bolts Wed, 26 Oct 2005 11:47:56 -0600

• Deardorff, Mark
  • 2000 IBC Structural Design Manual Wed, 2 Nov 2005 12:06:32 -0700

• Dennis S. Wish, PE
  • Freedom of Opinion WAS: Enercalc Sun, 2 Oct 2005 13:29:05 -0600
  • Dongles Mon, 3 Oct 2005 19:18:42 -0600
  • Tee Shirts Thu, 13 Oct 2005 15:18:42 -0600
  • Re: Regional Structural Engineering Tue, 25 Oct 2005 12:18:15 -0600
  • Re: California contract law BORPELS Sat, 5 Nov 2005 12:04:45 -0700
  • Re: California contract law BORPELS Sat, 5 Nov 2005 17:59:36 -0700
  • Re: California contract law BORPELS Sun, 6 Nov 2005 11:11:35 -0700
  • Re: California contract law BORPELS Mon, 7 Nov 2005 11:44:50 -0700
  • Re: California contract law BORPELS Wed, 9 Nov 2005 11:16:35 -0700
  • RE: reporting an architect Wed, 9 Nov 2005 11:25:19 -0700
  • RE: reporting an architect Wed, 9 Nov 2005 12:13:15 -0700
  • Columbarium Design Mon, 14 Nov 2005 18:01:37 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 13 Dec 2005 22:30:21 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 13 Dec 2005 23:54:29 -0700

• Devlin, Dan
  • Through the eyes of an architect Mon, 12 Dec 2005 12:28:16 -0700

• dfisher(--nospam--at)fpse.com
  • RE: reporting an architect Mon, 7 Nov 2005 10:31:58 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 12:28:36 -0700

• dileep Kulkarni
  • Moment releases for RCC beam to beam connection in STAAD Wed, 28 Dec 2005 21:37:41 -0700
  • Re: Support condition of RCC frame whether fixed or hinged Fri, 30 Dec 2005 21:19:11 -0700

• Drew Morris
  • ICC Seismic Design 3.01 Thu, 3 Nov 2005 16:30:45 -0700
  • Re: ICC Seismic Design 3.01 Thu, 3 Nov 2005 17:33:17 -0700
  • Re: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 18:29:32 -0700
  • Re: Occupancy Load for a Running Track Mon, 5 Dec 2005 16:13:30 -0700
  • Vent holes in BCI blocking Thu, 8 Dec 2005 16:35:42 -0700
  • Re: Vent holes in BCI blocking Fri, 9 Dec 2005 11:22:35 -0700
  • SI Metric Wed, 21 Dec 2005 17:43:20 -0700
  • Non-orthogonal lateral system Wed, 21 Dec 2005 18:08:03 -0700
  • Anchorage to concrete - concrete breakout Fri, 23 Dec 2005 12:51:18 -0700

• ECVAl3
  • Re: Tree live load Mon, 17 Oct 2005 10:14:46 -0600
  • Interesting Bridge Sat, 12 Nov 2005 12:06:25 -0700

• Ed . Haninger
  • Re: AISC 13th Edition Wed, 28 Dec 2005 11:58:37 -0700
  • Re: New AISC Steel Spec Wed, 28 Dec 2005 12:04:54 -0700
  • Re: 2005 AISC Seismic Provisions Thu, 29 Dec 2005 11:29:11 -0700

• Ed Najjarine, SE
  • Re: Seismic Deflection Criteria for "Penthouses" Tue, 25 Oct 2005 18:53:25 -0600

• Eli Grassley
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 15:10:20 -0600
  • 2x T&G decking Wed, 5 Oct 2005 15:18:57 -0600
  • RE: Prison Break Wed, 5 Oct 2005 16:45:26 -0600
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 17:15:42 -0600
  • RE: ICC Seismic Design 3.01 Thu, 3 Nov 2005 17:15:11 -0700
  • RE: My Talking Stick Experience Fri, 4 Nov 2005 17:46:29 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 17:08:03 -0700
  • AWS 7.2.7 Mon, 14 Nov 2005 17:10:35 -0700
  • half height steel nuts Wed, 16 Nov 2005 12:15:59 -0700
  • RE: half height steel nuts Thu, 17 Nov 2005 11:15:42 -0700
  • RE: half height steel nuts Thu, 17 Nov 2005 12:32:13 -0700
  • RE: Concrete floor on wood trusses Tue, 6 Dec 2005 17:53:28 -0700
  • RE: Concrete floor on wood trusses Wed, 7 Dec 2005 09:29:51 -0700
  • RE: Concrete floor on wood trusses Wed, 7 Dec 2005 09:36:52 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 13:02:00 -0700
  • RE: Vent holes in BCI blocking Thu, 8 Dec 2005 18:27:10 -0700
  • RE: non-load bearing gable end walls Tue, 13 Dec 2005 11:23:39 -0700
  • RE: Drive Screw Nails? Tue, 13 Dec 2005 15:52:55 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 13:56:17 -0700
  • RE: Column design Thu, 15 Dec 2005 18:24:08 -0700
  • RE: Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 11:49:42 -0700

• epsdryair
  • Jump to conclusions Tue, 8 Nov 2005 05:43:38 -0700

• Eric Green
  • RE: Linear variation of Soil modulus Mon, 19 Dec 2005 13:27:42 -0700

• Eric McAndrew
  • RE: on the aisc manual/specs Mon, 17 Oct 2005 14:02:16 -0600
  • RE: Availability of MC12's Fri, 16 Dec 2005 08:33:24 -0700

• Eric Ober
  • RE: Continuous Ridge Vents Wed, 9 Nov 2005 11:29:14 -0700

• Eric Tompos
  • CA Seismic Principles and Engineering Surveying Exam Tue, 15 Nov 2005 08:56:32 -0700

• Eugene Gordin
  • Question Regarding Speaker for UC Berkeley ASCE Chapter Meeting Sun, 9 Oct 2005 19:19:54 -0600

• Foy, Warren
  • RE: Masonry Special Inspection Thu, 6 Oct 2005 06:08:16 -0600
  • RE: PEMB - Tie Beam Thu, 6 Oct 2005 08:19:40 -0600
  • RE: ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 10:30:11 -0700
  • RE: Wood Roof Truss Issues Thu, 8 Dec 2005 05:46:02 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Thu, 8 Dec 2005 06:07:11 -0700

• Fred Turner
  • RE: Old Earthquake Book for whom? Thu, 29 Dec 2005 10:43:36 -0700

• Freeman Tang
  • RE: Wood Roof Truss Issues Mon, 5 Dec 2005 16:01:43 -0700
  • RE: Drive Screw Nails? Tue, 13 Dec 2005 17:36:17 -0700

• ftang ftang
  • Shear wall grade beam extension at foundation corner. Tue, 18 Oct 2005 10:44:54 -0600
  • FW: Shear wall grade beam extension at foundation corner. Tue, 18 Oct 2005 10:55:20 -0600
  • RE: Precast Site Walls Wed, 26 Oct 2005 10:23:18 -0600
  • RE: UBC 1632.2 Shallow Anchors Question Mon, 28 Nov 2005 11:00:49 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Mon, 28 Nov 2005 18:03:42 -0700

• G Vishwanath
  • Re: ENERCALC Mon, 3 Oct 2005 08:17:24 -0600
  • RE: Translation from German Wed, 5 Oct 2005 05:19:17 -0600
  • Re: reporting an architect Tue, 8 Nov 2005 04:25:43 -0700

• Gale45man
  • Pile Modelling in CSI SAFE Wed, 12 Oct 2005 10:52:30 -0600
  • diagonal corner reinforcement in cast-in-place diaphragms Wed, 12 Oct 2005 15:12:46 -0600
  • Re: relation b/w peal ground acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 10:45:44 -0600
  • Re: Welding to Old Steel Tue, 18 Oct 2005 10:50:44 -0600

• Garner, Robert
  • RE: Pile Modelling in CSI SAFE Mon, 10 Oct 2005 16:39:18 -0600
  • RE: Allowable Stress Design of a Concrete Beam Fri, 14 Oct 2005 10:59:01 -0600
  • RE: Welding to Old Steel Mon, 17 Oct 2005 15:43:12 -0600
  • RE: Sign post embedded in concrete footing Thu, 20 Oct 2005 16:00:09 -0600
  • [no subject] Tue, 25 Oct 2005 12:17:57 -0600
  • RE: Contract Requirement in California Tue, 25 Oct 2005 14:19:57 -0600
  • RE: Tue, 25 Oct 2005 15:49:11 -0600
  • RE: 2000 IBC Structural Design Manual Wed, 2 Nov 2005 12:17:46 -0700
  • RE: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 16:56:27 -0700
  • RE: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 15:15:43 -0700
  • RE: crack monitor entertainment Thu, 1 Dec 2005 16:43:59 -0700
  • doug copp Fri, 2 Dec 2005 11:43:52 -0700
  • RE: Shared footings Fri, 2 Dec 2005 14:23:50 -0700
  • RE: Corrosion in reinforcing steel in slabs Fri, 2 Dec 2005 14:43:41 -0700
  • Shared Footings Fri, 2 Dec 2005 16:46:04 -0700
  • Nitronic 33 rebar Wed, 7 Dec 2005 11:51:19 -0700
  • Availability of MC12's Fri, 16 Dec 2005 07:58:18 -0700
  • Bridge slide bearings Mon, 19 Dec 2005 13:13:38 -0700
  • RE: Bridge slide bearings Tue, 20 Dec 2005 13:23:40 -0700
  • RE: The 13th Ed. of AISC Manual Wed, 21 Dec 2005 08:15:25 -0700
  • New AISC Specs Wed, 21 Dec 2005 11:32:35 -0700
  • RE: SI Metric Thu, 22 Dec 2005 08:07:53 -0700
  • New AISC Steel Spec Wed, 28 Dec 2005 11:25:13 -0700
  • RE: PCA Notes & ACI 318-05 Wed, 28 Dec 2005 12:28:34 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 07:58:59 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 09:09:19 -0700

• Gary
  • RE: dynamic foundations Tue, 20 Dec 2005 17:08:45 -0700

• Gary Grinstead
  • RE: Contract Requirement in California Tue, 25 Oct 2005 14:25:52 -0600
  • Re: Beam - Moment Ratio Mon, 31 Oct 2005 08:57:12 -0700
  • Re: Exam de-briefing Wed, 2 Nov 2005 18:06:32 -0700
  • Re: Job Vacancy -- in Nigeria Wed, 9 Nov 2005 15:02:49 -0700
  • Plywood shearwall over plywood Wed, 9 Nov 2005 15:57:07 -0700
  • Re: Plywood shearwall over plywood Wed, 9 Nov 2005 16:32:40 -0700
  • RE: Plywood shearwall over plywood Thu, 10 Nov 2005 10:02:31 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 16:30:32 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 17:01:52 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 17:04:15 -0700
  • Re: And you think you have plan check problems... Thu, 8 Dec 2005 13:03:11 -0700
  • Re: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 10:55:37 -0700
  • Re: SI Metric Thu, 22 Dec 2005 14:06:26 -0700

• Gary Hodgson & Associates
  • Re: ENERCALC Sat, 1 Oct 2005 06:40:17 -0600
  • Re: Slab-on-asphalt? Sat, 1 Oct 2005 06:58:15 -0600
  • Re: Dongles Wed, 5 Oct 2005 05:39:39 -0600
  • Re: PEMB - Tie Beam Fri, 7 Oct 2005 05:46:05 -0600
  • Re: tick tock Wed, 19 Oct 2005 05:34:55 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 05:38:01 -0600
  • Re: sj joists? - rusting of top chords Tue, 29 Nov 2005 05:42:45 -0700
  • RE: Conc. Tilt-up w/ crane loads Thu, 1 Dec 2005 05:52:43 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 05:41:43 -0700
  • RE: Fwd: Doug Copp - Mr. Karasik's client Sat, 3 Dec 2005 08:09:35 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 05:39:44 -0700
  • RE: interesting article in today's LA Times Tue, 6 Dec 2005 05:49:59 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 05:43:52 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 06:20:03 -0700
  • Re: moonlighting Wed, 14 Dec 2005 05:56:23 -0700
  • RE: Typical SIP roof to SIP wall connection Sat, 17 Dec 2005 07:16:29 -0700
  • Re: CDN regulatory enviroment [was Typical SIP roof to SIP wall connection] Mon, 19 Dec 2005 05:40:24 -0700
  • RE: Typical SIP roof to SIP wall connection Mon, 19 Dec 2005 05:41:20 -0700
  • Re: CDN regulatory enviroment [was Typical SIP roof to SIP wall connection] Mon, 19 Dec 2005 05:44:15 -0700
  • RE: The 13th Ed. of AISC Manual Wed, 21 Dec 2005 06:27:07 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Wed, 21 Dec 2005 06:28:56 -0700
  • RE: The 13th Ed. of AISC Manual Thu, 22 Dec 2005 05:51:16 -0700
  • RE: SI Metric Thu, 22 Dec 2005 06:08:45 -0700
  • Re: SI Metric Thu, 22 Dec 2005 06:14:22 -0700
  • RE: SI Metric Fri, 23 Dec 2005 05:40:43 -0700
  • Re: The 13th Ed. of AISC Manual Fri, 23 Dec 2005 05:48:08 -0700
  • Re: OT: Seasons Greetings Fri, 23 Dec 2005 05:54:54 -0700
  • RE: SI Metric Fri, 23 Dec 2005 06:18:20 -0700
  • Re: SI Metric Sat, 24 Dec 2005 06:50:15 -0700
  • Re: SI Metric Wed, 28 Dec 2005 11:23:00 -0700
  • RE: SI Metric Thu, 29 Dec 2005 06:00:52 -0700
  • Re: Details Sat, 31 Dec 2005 07:22:21 -0700

• Gautam Manandhar
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 12:07:35 -0600
  • Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 13:16:37 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 16:13:47 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 11:58:13 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 12:06:04 -0700
  • Re: Informal Poll Thu, 15 Dec 2005 14:09:59 -0700

• Gerard Madden, SE
  • RE: Modeling Techniques (deck) Wed, 5 Oct 2005 13:24:12 -0600
  • Prison Break Wed, 5 Oct 2005 13:53:33 -0600
  • RE: 2x T&G decking Wed, 5 Oct 2005 15:32:01 -0600
  • RE: Prison Break Wed, 5 Oct 2005 16:49:06 -0600
  • LA Times Article - Vulnerable Concrete Buildings Tue, 11 Oct 2005 14:33:20 -0600
  • RE: Tee Shirts Thu, 13 Oct 2005 15:57:29 -0600
  • RE: relation b/w peal ground acceleration and Seismic Zones - triangle of life Mon, 17 Oct 2005 12:08:24 -0600
  • RE: ETABS Tue, 25 Oct 2005 13:35:20 -0600
  • RE: Welding High Strength Bolts Wed, 26 Oct 2005 09:45:41 -0600
  • RE: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 11:12:17 -0600
  • RE: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 13:00:07 -0600
  • RE: LIGHT GAUGE/COLD FORMED SECTIONS Wed, 26 Oct 2005 13:50:47 -0600
  • RE: Control Joints in a Mat Foundation Thu, 27 Oct 2005 13:39:26 -0600
  • RE: Control Joints in a Mat Foundation Thu, 27 Oct 2005 14:12:15 -0600
  • Roof Gathering Area Mon, 31 Oct 2005 11:31:28 -0700
  • RE: shear studs Mon, 31 Oct 2005 12:10:45 -0700
  • RE: upside down base  plate Thu, 3 Nov 2005 10:09:31 -0700
  • RE: journalist query - factors of safety Fri, 4 Nov 2005 09:43:15 -0700
  • RE: My Talking Stick Experience Fri, 4 Nov 2005 17:09:39 -0700
  • RE: Steel Base Plate Grout Tue, 8 Nov 2005 13:31:56 -0700
  • RE: reporting an architect Wed, 9 Nov 2005 10:38:28 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 16:47:46 -0700
  • RE: Plywood shearwall over plywood Wed, 9 Nov 2005 16:51:37 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 17:16:23 -0700
  • RE: Steel stud shear walls Fri, 11 Nov 2005 12:13:47 -0700
  • Staggered Truss - Seismic Mon, 21 Nov 2005 13:25:34 -0700
  • Staggered Truss - Seismic Mon, 21 Nov 2005 13:26:45 -0700
  • RE: Staggered Truss - Seismic Tue, 22 Nov 2005 10:19:00 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Mon, 28 Nov 2005 10:55:05 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Tue, 29 Nov 2005 09:48:12 -0700
  • And you think you have plan check problems... Thu, 8 Dec 2005 11:34:37 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 14:57:32 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 15:34:28 -0700
  • RE: Engineer Humor Thu, 8 Dec 2005 15:59:57 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 16:48:26 -0700
  • RE: Way Off Topic: Holiday Humor Thu, 8 Dec 2005 16:57:47 -0700
  • RE: And you think you have plan check problems... Thu, 8 Dec 2005 17:43:46 -0700
  • RE: SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc. Mon, 12 Dec 2005 15:27:46 -0700
  • RE: IBC 2305.1.5 Tue, 13 Dec 2005 17:09:17 -0700
  • RE: Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 17:04:50 -0700
  • RE: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 17:25:25 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 14:28:48 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 14:56:23 -0700
  • RE: Informal Poll Fri, 16 Dec 2005 11:18:23 -0700
  • RE: Informal Poll Fri, 16 Dec 2005 13:21:00 -0700

• ggg
  • CORRUGATED DECK Fri, 7 Oct 2005 12:37:59 -0600

• ghodgson
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 18:04:32 -0700

• gil
  • Re: Short tendon in Post-tensioning Wed, 7 Dec 2005 18:36:41 -0700

• Gil Brock
  • Re: Slab Moments in Etabs Thu, 20 Oct 2005 17:45:27 -0600
  • Re: Short tendon in Post-tensioning Tue, 6 Dec 2005 17:12:43 -0700
  • Re: Temperature effect using STAAD Wed, 14 Dec 2005 21:01:17 -0700
  • RE: Joints in structural floor slab Thu, 15 Dec 2005 21:18:23 -0700
  • Re: cantilevered member deflection limit Tue, 20 Dec 2005 18:10:43 -0700
  • Re: Column design Tue, 20 Dec 2005 22:10:52 -0700
  • RE: SI Metric Wed, 21 Dec 2005 19:13:33 -0700
  • Re: SI Metric Fri, 23 Dec 2005 13:36:11 -0700
  • Re: SI Metric Fri, 23 Dec 2005 13:42:08 -0700
  • Re: Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 08:33:11 -0700

• Glen Pappas
  • RE: Special Inspection Form Wed, 2 Nov 2005 07:25:47 -0700

• Greg Mosier
  • Masonry Special Inspection Wed, 5 Oct 2005 14:55:03 -0600

• gskwy
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 11:32:08 -0600
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 13:13:15 -0600
  • Re: T shirt... Thu, 13 Oct 2005 08:47:24 -0600
  • Re: crack monitor entertainment Thu, 1 Dec 2005 15:26:18 -0700
  • Re: Foundation Soil Characteristics by Surface Wave Sounding Thu, 1 Dec 2005 16:56:10 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 18:51:45 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 19:51:33 -0700
  • Re: crack monitor entertainment sheldon karasik Thu, 1 Dec 2005 21:03:39 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 10:52:34 -0700
  • Fwd: Doug Copp Fri, 2 Dec 2005 11:12:33 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 17:56:47 -0700
  • Re: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 08:18:57 -0700
  • Re: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 08:45:11 -0700

• Gunnar H. Isleifsson
  • RE: Chart Excel For Engineering Usage Mon, 14 Nov 2005 17:14:09 -0700
  • RE: SI Metric Fri, 23 Dec 2005 16:47:57 -0700

• Haan, Scott M POA
  • Gypsum board for bracing in 03 IBC Seismic Design Category D? Mon, 3 Oct 2005 12:40:37 -0600
  • RE: Gypsum board for bracing in 03 IBC Seismic Design Category D Tue, 4 Oct 2005 13:59:14 -0600
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 15:09:40 -0600
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 17:33:11 -0600
  • RE: Masonry Special Inspection Thu, 6 Oct 2005 10:22:15 -0600
  • RE: Masonry Special Inspection Thu, 6 Oct 2005 10:24:00 -0600
  • RE: Masonry Special Inspection Thu, 6 Oct 2005 10:53:53 -0600
  • RE: diagonal corner reinforcement in cast-in-place diaphragms Wed, 12 Oct 2005 15:21:08 -0600
  • RE: EX-CITY ENGINEER SUED IN FLOODING Wed, 26 Oct 2005 15:16:48 -0600
  • RE: mortar requirements in masonry piers at manufactured homes Thu, 27 Oct 2005 12:41:28 -0600
  • RE: Base isolation for homes? Fri, 4 Nov 2005 09:24:20 -0700
  • RE: Base isolation for homes? Fri, 4 Nov 2005 09:45:06 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 09:26:20 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 13:26:14 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 16:54:42 -0700
  • interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 11:47:48 -0700
  • RE: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:19:05 -0700
  • RE: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:33:20 -0700
  • cieling finish hung of k-joist bottom chords require additional bracing? Tue, 15 Nov 2005 18:02:34 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 09:47:35 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 09:54:50 -0700
  • hard ceiling direct hung off steel joist bottom chords Wed, 16 Nov 2005 18:08:48 -0700
  • RE: Concrete or Masonry Infill Thu, 17 Nov 2005 10:12:28 -0700
  • RE: Supporting Brick Above Low Roof Fri, 18 Nov 2005 13:25:43 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Tue, 29 Nov 2005 10:54:14 -0700
  • gypsum board on hat channel horizontal diaphragm to brace partitions Wed, 30 Nov 2005 10:43:58 -0700
  • RE: Minimum Steel Beam Bearing Wed, 30 Nov 2005 12:20:26 -0700
  • Architect cheating on structural calculations - where's the building department when you need it. Mon, 5 Dec 2005 10:17:38 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Tue, 6 Dec 2005 18:09:58 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 10:52:52 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 10:55:49 -0700
  • RE: And you think you have plan check problems... Thu, 8 Dec 2005 12:44:40 -0700
  • RE: And you think you have plan check problems... Thu, 8 Dec 2005 13:04:59 -0700
  • RE: moonlighting Tue, 13 Dec 2005 09:52:07 -0700
  • RE: moonlighting Tue, 13 Dec 2005 12:30:02 -0700
  • RE: moonlighting Tue, 13 Dec 2005 17:32:28 -0700
  • RE: concrete topping? on metal deck over timber structure. Thu, 15 Dec 2005 13:08:59 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 13:25:38 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 16:17:51 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 19:23:44 -0700
  • how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 10:03:43 -0700
  • RE: fema 350 Mon, 19 Dec 2005 10:11:15 -0700
  • RE: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 10:53:32 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 11:51:03 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 11:59:04 -0700
  • RE: Costly seminars and Code corrections Mon, 19 Dec 2005 13:44:30 -0700
  • RE: Costly seminars and Code corrections Mon, 19 Dec 2005 17:20:21 -0700
  • cantilevered member deflection limit Tue, 20 Dec 2005 18:08:35 -0700
  • RE: cantilevered member deflection limit Tue, 20 Dec 2005 18:25:15 -0700
  • RE: SI Metric Thu, 22 Dec 2005 09:03:40 -0700
  • RE: SI Metric Thu, 22 Dec 2005 10:14:38 -0700
  • RE: SI Metric Thu, 22 Dec 2005 12:49:41 -0700
  • RE: Non-orthogonal lateral system Thu, 22 Dec 2005 15:38:36 -0700
  • RE: SI Metric Wed, 28 Dec 2005 09:32:05 -0700
  • RE: Retaining Wall Surcharge Formula Wed, 28 Dec 2005 16:24:26 -0700
  • RE: Old Glu-Lam Combinations Thu, 29 Dec 2005 10:49:13 -0700

• Harold Sprague
  • Re: Wind velocity Fri, 7 Oct 2005 02:14:51 -0600
  • RE: PEMB - Tie Beam Mon, 10 Oct 2005 10:58:54 -0600
  • Re: Wind velocity Mon, 10 Oct 2005 11:41:30 -0600
  • Re: Welding to Old Steel Wed, 19 Oct 2005 00:44:01 -0600
  • RE: Control Joints in a Mat Foundation Fri, 28 Oct 2005 07:12:22 -0600
  • Re: Roof Gathering Area Tue, 1 Nov 2005 08:07:10 -0700
  • RE: Steel Base Plate Grout Tue, 8 Nov 2005 23:56:37 -0700
  • RE: Continuous Ridge Vents Wed, 9 Nov 2005 11:00:07 -0700
  • RE: Concrete or Masonry Infill Fri, 18 Nov 2005 07:49:20 -0700
  • RE: Concrete or Masonry Infill Fri, 18 Nov 2005 07:50:34 -0700
  • RE: half height steel nuts Fri, 18 Nov 2005 07:58:04 -0700
  • RE: half height steel nuts Fri, 18 Nov 2005 07:58:42 -0700
  • RE: half height steel nuts Fri, 18 Nov 2005 08:00:57 -0700
  • RE: half height steel nuts Fri, 18 Nov 2005 08:04:55 -0700
  • RE: ibc adoption Fri, 18 Nov 2005 08:24:34 -0700
  • RE: Long Runs of Tilt-up Panels Fri, 18 Nov 2005 08:41:05 -0700
  • RE: Possible Louisiana Code Provision Fri, 18 Nov 2005 08:45:59 -0700
  • RE: Possible Louisiana Code Provision Fri, 18 Nov 2005 08:46:26 -0700
  • RE: ibc adoption Fri, 18 Nov 2005 14:54:40 -0700
  • RE: Staggered Truss - Seismic Tue, 22 Nov 2005 09:58:11 -0700
  • RE: Staggered Truss - Seismic Tue, 22 Nov 2005 09:59:32 -0700
  • RE: sj joists? - rusting of top chords Tue, 29 Nov 2005 10:24:14 -0700
  • RE: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 15:04:26 -0700
  • RE: ASCE Table 1-1 Classification of Buidlings Wed, 30 Nov 2005 12:43:22 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 09:02:10 -0700
  • RE: Follow Up on Vertical Component of EQ in UBC97 and IBC2000 Fri, 2 Dec 2005 09:24:44 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 10:18:33 -0700
  • RE: Thermally Cut Bolt Holes Fri, 2 Dec 2005 10:18:59 -0700
  • RE: crack monitor Fri, 2 Dec 2005 10:57:31 -0700
  • Re: Fw: crack monitor entertainment Fri, 2 Dec 2005 11:02:28 -0700
  • Re: ASCE Table 1-1 Classification of Buidlings Fri, 2 Dec 2005 12:20:54 -0700
  • Re: Thermally Cut Bolt Holes Fri, 2 Dec 2005 13:32:55 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 14:00:19 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Sat, 3 Dec 2005 18:26:27 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 06:46:33 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 07:11:00 -0700
  • RE: Wood Roof Truss Issues Mon, 5 Dec 2005 12:29:56 -0700
  • RE: redwood gazebo Tue, 6 Dec 2005 08:12:36 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation - Cryogenic Rebar Wed, 7 Dec 2005 12:53:25 -0700
  • 2005 AISC Seismic Provisions Wed, 7 Dec 2005 13:37:32 -0700
  • RE: CMU in water/wastewater Thu, 15 Dec 2005 14:13:00 -0700
  • RE: Cold Weather Reinf. Masonry Thu, 15 Dec 2005 17:37:47 -0700
  • RE: Joints in structural floor slab Fri, 16 Dec 2005 07:37:47 -0700
  • RE: Availability of MC12's Fri, 16 Dec 2005 14:21:05 -0700
  • RE: Availability of MC12's Fri, 16 Dec 2005 14:29:20 -0700
  • RE: Hooked anchor bolts Tue, 20 Dec 2005 17:19:32 -0700
  • RE: Cement Pricing for January, 2006? Wed, 28 Dec 2005 07:45:36 -0700
  • RE: Aggregate Spec (Re-post) Thu, 29 Dec 2005 07:48:44 -0700
  • RE: Details Sat, 31 Dec 2005 12:55:15 -0700
  • RE: Cement Pricing for January, 2006? Sat, 31 Dec 2005 13:34:21 -0700

• Harris, Brian
  • RE: Pile Modelling in CSI SAFE Wed, 12 Oct 2005 11:33:44 -0600
  • RE: journalist query - factors of safety Fri, 4 Nov 2005 14:34:18 -0700

• HBAP
  • Re: PCA Column by pacstrructurepoint / any other alternatives Sun, 30 Oct 2005 18:03:09 -0700

• Himat Solanki
  • Re: Dynamic analysis of Table top foundation Wed, 12 Oct 2005 14:05:14 -0600
  • Re: Solid elements Tue, 29 Nov 2005 14:36:39 -0700
  • RE: dynamic foundations Tue, 20 Dec 2005 15:43:03 -0700

• Honles, Thomas
  • RE: Reporting an Arch 2 Wed, 9 Nov 2005 11:53:58 -0700
  • RE: Reporting an Arch 2 Wed, 9 Nov 2005 13:04:44 -0700

• Hood, Matthew O.
  • Concrete or Masonry Infill Thu, 17 Nov 2005 09:28:24 -0700
  • RE: Concrete or Masonry Infill Thu, 17 Nov 2005 19:21:20 -0700
  • RE: Concrete or Masonry Infill Thu, 17 Nov 2005 19:53:33 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 09:31:59 -0700

• Huffman, Sharlie TRAN:EX
  • RE: Seismic Design of Pedestrian Bridges Thu, 1 Dec 2005 10:25:28 -0700
  • RE: crack monitor Thu, 1 Dec 2005 10:32:18 -0700
  • Re: SI Metric Wed, 21 Dec 2005 20:46:06 -0700
  • Re: SI Metric Wed, 21 Dec 2005 20:47:46 -0700
  • Re: SI Metric Thu, 22 Dec 2005 23:42:57 -0700

• J K Hosseinzadeh
  • Re: California contract law Tue, 1 Nov 2005 13:00:22 -0700
  • Re: Roof Gathering Area Tue, 1 Nov 2005 15:31:31 -0700

• j.n.sigalas
  • Re: Books on bridge design Mon, 7 Nov 2005 13:12:17 -0700

• Jake Watson
  • Re: Precast Site Walls Wed, 26 Oct 2005 08:49:57 -0600
  • RE: Jumping to Conclusions Wed, 9 Nov 2005 21:56:25 -0700
  • RE: Long Runs of Tilt-up Panels Wed, 16 Nov 2005 20:48:11 -0700
  • RE: hard ceiling direct hung off steel joist bottom chords Wed, 16 Nov 2005 21:00:50 -0700

• James Cohen
  • Re: reporting an architect Mon, 7 Nov 2005 10:31:57 -0700
  • Re: Jumping to Conclusions Wed, 9 Nov 2005 08:10:31 -0700
  • Re: Columbarium Design Tue, 15 Nov 2005 10:58:33 -0700
  • Re: crack monitor Thu, 1 Dec 2005 09:02:16 -0700
  • Re: crack monitor Thu, 1 Dec 2005 10:05:18 -0700
  • Re: crack monitor Thu, 1 Dec 2005 11:50:10 -0700
  • Re: crack monitor Thu, 1 Dec 2005 13:29:28 -0700
  • Re: wrong crack monitor Thu, 1 Dec 2005 14:00:26 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 07:26:43 -0700
  • Fw: crack monitor entertainment Fri, 2 Dec 2005 09:16:48 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 10:36:41 -0700
  • Re: OT: Seasons Greetings Fri, 23 Dec 2005 07:34:06 -0700
  • Re: Sulfate Attack Wed, 28 Dec 2005 12:52:44 -0700

• James Fulton
  • Re: Control Joints in a Mat Foundation Fri, 28 Oct 2005 06:26:01 -0600

• James Getaz
  • RE: rock veneer support in residential construction Sat, 29 Oct 2005 18:13:49 -0600

• Jared Lewis
  • IBC 2305.1.5 Tue, 13 Dec 2005 16:30:21 -0700

• Jascopac
  • RE: reporting an architect Mon, 7 Nov 2005 11:04:48 -0700
  • RE: reporting an architect Wed, 9 Nov 2005 18:58:44 -0700

• Jason Atwood
  • roark's stress and strain Thu, 13 Oct 2005 18:29:41 -0600
  • roark's formula's Fri, 14 Oct 2005 08:32:27 -0600
  • LIGHT GAUGE/COLD FORMED SECTIONS Wed, 26 Oct 2005 13:45:08 -0600
  • composite beams w/ hydronics Mon, 31 Oct 2005 15:24:31 -0700
  • Re: Base isolation for homes? Fri, 4 Nov 2005 08:49:18 -0700

• Jason Christensen
  • RE: Sign post embedded in concrete footing Thu, 20 Oct 2005 13:03:45 -0600
  • Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 13:43:22 -0700
  • RE: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 15:59:05 -0700
  • RE: Conc. Tilt-up w/ crane loads Wed, 30 Nov 2005 09:30:24 -0700
  • RE: Conc. Tilt-up w/ crane loads Wed, 30 Nov 2005 10:47:25 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 12:25:44 -0700
  • AISC Steel Spec Combine forces question Thu, 29 Dec 2005 15:59:34 -0700

• Jason Emoto
  • RE: Tue, 25 Oct 2005 14:43:10 -0600

• jatech
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 18:14:48 -0700

• Javier Encinas
  • Re: Wind velocity Thu, 6 Oct 2005 14:08:14 -0600
  • Re: Wind velocity Fri, 7 Oct 2005 08:01:40 -0600
  • Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 14:48:20 -0600
  • Corrosion in reinforcing steel in slabs Fri, 2 Dec 2005 14:28:50 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 09:23:36 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 13:29:34 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 13:31:35 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 15:52:02 -0700

• jebby varughese
  • dock design Wed, 5 Oct 2005 13:15:33 -0600

• Jeffrey Fertich
  • RE: EX-CITY "ENGINEER" SUED IN FLOODING Thu, 27 Oct 2005 05:26:05 -0600

• Jeremy White
  • RE: Costly seminars and Code corrections Mon, 19 Dec 2005 13:49:03 -0700

• Jim and Peggy Dall
  • mortar requirements in masonry piers at manufactured homes Wed, 26 Oct 2005 15:36:12 -0600
  • RE: LIGHT GAUGE/COLD FORMED SECTIONS Wed, 26 Oct 2005 21:00:46 -0600
  • RE: non-load bearing gable end walls Tue, 13 Dec 2005 07:27:36 -0700

• Jim Getaz
  • Possible Louisiana Code Provision Wed, 16 Nov 2005 06:23:38 -0700
  • Re: Long Runs of Tilt-up Panels Thu, 17 Nov 2005 05:51:04 -0700
  • Re: Minimum Steel Beam Bearing Mon, 28 Nov 2005 07:00:35 -0700

• Jim Hannah
  • Re: wind on steel frames without cladding Mon, 3 Oct 2005 12:02:42 -0600
  • Re: Concrete at sign pole base Wed, 26 Oct 2005 21:45:47 -0600
  • Re: STAAD Question Tue, 29 Nov 2005 18:45:25 -0700
  • Re: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 18:59:24 -0700
  • Re: Vent holes in BCI blocking Thu, 8 Dec 2005 21:48:54 -0700

• Jim Wilson
  • Re: FW: Ceiling joists/rafter ties IRC R802.3.1 Wed, 5 Oct 2005 11:25:06 -0600
  • Dented light pole Wed, 5 Oct 2005 12:51:19 -0600
  • Coefficient of thermal expansion - steel Thu, 13 Oct 2005 08:31:01 -0600
  • RE: Coefficient of thermal expansion - steel Thu, 13 Oct 2005 12:14:12 -0600
  • Tree live load Sat, 15 Oct 2005 14:40:29 -0600
  • Re: Tree live load Mon, 17 Oct 2005 12:03:27 -0600
  • Sign post embedded in concrete footing Wed, 19 Oct 2005 11:26:16 -0600
  • Re: Sign post embedded in concrete footing Wed, 19 Oct 2005 16:47:37 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 12:54:20 -0600
  • RE: Sign post embedded in concrete footing Thu, 20 Oct 2005 13:17:23 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 15:13:59 -0600
  • Re: mortar requirements in masonry piers at manufactured homes Thu, 27 Oct 2005 06:09:23 -0600
  • Re: Lateral Load Due to Foot-Traffic Wed, 9 Nov 2005 12:21:10 -0700
  • Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 16:34:58 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 17:41:49 -0700
  • Re: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 21:40:24 -0700
  • Moment frames / wood construction Mon, 14 Nov 2005 19:58:04 -0700
  • Re: Moment frames / wood construction Mon, 14 Nov 2005 21:38:48 -0700
  • Doug Copp - Sheldon Karasik info Fri, 2 Dec 2005 13:15:46 -0700
  • Wood floor beam shear connection Fri, 30 Dec 2005 05:35:02 -0700

• JIMB66
  • Re: AISI Cold Formed Steel Design Fri, 9 Dec 2005 07:40:42 -0700
  • Re: Florida Dock Design Fri, 9 Dec 2005 07:41:18 -0700

• jkestner
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 17:38:13 -0700

• jkumar
  • dynamic foundations Wed, 21 Dec 2005 22:04:08 -0700

• Jnapd
  • Re: Contract Requirement in California Tue, 25 Oct 2005 12:57:24 -0600
  • Re: California contract law Tue, 1 Nov 2005 13:24:03 -0700
  • Re: California contract law Tue, 1 Nov 2005 14:03:06 -0700
  • Re: California contract law Tue, 1 Nov 2005 14:17:59 -0700
  • Re: California contract law Tue, 1 Nov 2005 22:05:42 -0700
  • Re: California contract law Tue, 1 Nov 2005 22:11:04 -0700
  • Re: Exam de-briefing Wed, 2 Nov 2005 14:01:42 -0700
  • Re: Columbarium Design Tue, 15 Nov 2005 10:45:41 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 22:43:24 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 18:18:56 -0700
  • Re: Wood Roof Truss Issues Mon, 5 Dec 2005 17:24:23 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 15:05:12 -0700
  • Re: Way Off Topic: Holiday Humor Fri, 9 Dec 2005 12:39:03 -0700
  • Re: Giants, Frogs, et al Fri, 9 Dec 2005 18:28:10 -0700
  • Re: Way Off Topic: Holiday Humor Sat, 10 Dec 2005 00:09:45 -0700
  • Re: non-load bearing gable end walls Tue, 13 Dec 2005 10:50:14 -0700
  • Re: Informal Poll Fri, 16 Dec 2005 11:04:35 -0700
  • Re: Complements of the Season to All Thu, 22 Dec 2005 21:18:00 -0700
  • Re: Wood floor beam shear connection Fri, 30 Dec 2005 13:53:17 -0700

• Joe Grill
  • RE: common rebar grade Fri, 14 Oct 2005 08:54:22 -0600
  • rock veneer support in residential construction Fri, 28 Oct 2005 10:25:26 -0600
  • RE: Your Opinion? Fri, 11 Nov 2005 10:32:34 -0700
  • RE: Supporting Brick Above Low Roof Fri, 18 Nov 2005 13:30:22 -0700
  • RE: Vent holes in BCI blocking Fri, 9 Dec 2005 07:56:44 -0700
  • Separate unattached RV Storage Tue, 13 Dec 2005 16:41:45 -0700
  • concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 09:36:44 -0700
  • RE: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 18:26:41 -0700
  • RE: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 19:06:28 -0700

• John C. Jones
  • Civil Engineering T-shirt available Wed, 12 Oct 2005 09:29:50 -0600
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 10:56:27 -0600
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 12:46:35 -0600
  • RE: Civil Engineering T-shirt available Thu, 13 Oct 2005 14:28:27 -0600
  • RE: Tee Shirts Thu, 13 Oct 2005 15:49:44 -0600
  • RE: Staggered Truss - Seismic Tue, 22 Nov 2005 10:08:13 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 04:31:49 -0700

• John Goodman
  • RE: Signing & Sealing Drawings Thu, 10 Nov 2005 07:30:44 -0700
  • RE: New AISC Steel Spec Wed, 28 Dec 2005 11:49:24 -0700

• John J. Treff
  • Modeling Techniques (deck) Wed, 5 Oct 2005 12:13:48 -0600
  • WIND LOADS ON CANOPIES Wed, 26 Oct 2005 18:46:36 -0600
  • Your Opinion? Thu, 10 Nov 2005 16:47:57 -0700

• John L. Smart
  • Continuous Ridge Vents Wed, 9 Nov 2005 07:00:56 -0700
  • Continuous Ridge Vents Wed, 9 Nov 2005 07:02:45 -0700
  • Composite Girders Tue, 22 Nov 2005 10:08:05 -0700
  • RE: SI Metric Thu, 22 Dec 2005 06:26:29 -0700

• John McQuaid
  • journalist query - factors of safety Fri, 4 Nov 2005 08:43:16 -0700

• John Riley
  • Re: PEMB - Tie Beam Thu, 6 Oct 2005 08:52:14 -0600
  • RE: common rebar grade Fri, 14 Oct 2005 08:31:03 -0600
  • Special Inspection Form Tue, 1 Nov 2005 15:31:55 -0700
  • RE: Special Inspection Form Thu, 3 Nov 2005 03:25:51 -0700
  • Fixed Ladder Dimensions Thu, 3 Nov 2005 14:42:44 -0700
  • Re: Modeling Helipad with Springs Fri, 4 Nov 2005 16:15:40 -0700
  • reporting an architect Tue, 8 Nov 2005 15:19:26 -0700
  • Re: BYRON K CHILDS/Sargentlundy is out of the office. Sat, 26 Nov 2005 09:41:05 -0700
  • Re: Occupancy Load for a Running Track Mon, 5 Dec 2005 15:46:41 -0700
  • Re: Wood Roof Truss Issues Wed, 7 Dec 2005 07:50:40 -0700
  • Re: OT: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 07:28:42 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 07:41:16 -0700
  • Details Sat, 31 Dec 2005 11:35:33 -0700

• joraljim
  • Mortar & sulfates Fri, 14 Oct 2005 09:36:38 -0600
  • Books on bridge design Mon, 7 Nov 2005 09:55:13 -0700

• Jordan Truesdell, PE
  • Re: Dongles Tue, 4 Oct 2005 13:08:59 -0600
  • Re: Masonry Special Inspection Thu, 6 Oct 2005 08:58:28 -0600
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 09:41:32 -0600
  • Re: Civil Engineering T-shirt available Thu, 13 Oct 2005 17:47:13 -0600
  • Re: common rebar grade Fri, 14 Oct 2005 11:46:24 -0600
  • Re: Isolated pole deep (flagpole) questions. Thu, 20 Oct 2005 09:39:25 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 17:25:24 -0600
  • Re: rock veneer support in residential construction Fri, 28 Oct 2005 20:02:14 -0600
  • Re: NCEES Obtains Copyright Infringement Judgment against Examinee Mon, 7 Nov 2005 08:21:14 -0700
  • Re: singing and sealing / insurance Fri, 11 Nov 2005 12:25:45 -0700
  • Re: Steel stud shear walls Fri, 11 Nov 2005 12:35:37 -0700
  • Re: Live Load Reduction, IRC 2003 Tue, 15 Nov 2005 09:45:10 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 13:38:12 -0700
  • Re: Supporting Brick Above Low Roof Fri, 18 Nov 2005 13:16:35 -0700
  • Re: Wood Roof Truss Issues Wed, 7 Dec 2005 08:13:21 -0700
  • Re: Need some info on seismic design requirement for IBC 2003 Thu, 8 Dec 2005 13:17:16 -0700
  • Re: And you think you have plan check problems... Thu, 8 Dec 2005 13:37:07 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 13:23:06 -0700
  • Re: Through the eyes of an architect Mon, 12 Dec 2005 13:36:03 -0700
  • Re: non-load bearing gable end walls Tue, 13 Dec 2005 10:25:26 -0700
  • Re: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 13:12:31 -0700
  • Re: concrete topping? on metal deck over timber structure. Thu, 15 Dec 2005 07:25:21 -0700
  • Re: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 07:45:19 -0700
  • Re: Happy Holidays "Structural Plans" Fri, 16 Dec 2005 14:08:43 -0700
  • Christmas Drawing - New Site Fri, 16 Dec 2005 14:48:04 -0700
  • Re: SI Metric Thu, 22 Dec 2005 13:14:31 -0700
  • Re: OT: Seasons Greetings Thu, 22 Dec 2005 14:19:46 -0700
  • Re: OT - Business credit card Tue, 27 Dec 2005 07:47:59 -0700
  • ADT vs vanilla AutoCAD? Tue, 27 Dec 2005 13:07:50 -0700
  • Re: Concrete Density Wed, 28 Dec 2005 13:41:16 -0700

• Joseph Grill
  • Re: MathCad Tue, 4 Oct 2005 12:18:58 -0600
  • multiple opening software Thu, 6 Oct 2005 14:58:51 -0600
  • Re: Wind velocity Fri, 7 Oct 2005 08:25:39 -0600
  • Re: Your Opinion? Thu, 10 Nov 2005 18:37:30 -0700

• Josh Plummer
  • RE: The 13th Ed. of AISC Manual Mon, 19 Dec 2005 07:54:11 -0700

• Junata
  • Re: Mortar & sulfates Tue, 18 Oct 2005 10:29:21 -0600

• junk01
  • RE: Job Vacancy -- in Nigeria Wed, 9 Nov 2005 14:07:34 -0700
  • RE: Garbage truck incident in Illinois Thu, 10 Nov 2005 13:32:12 -0700

• K N SHETH
  • Re: Pile Modelling in CSI SAFE Thu, 13 Oct 2005 01:24:49 -0600
  • Re: Shared footings Tue, 6 Dec 2005 03:17:20 -0700
  • Re: Temperature effect using STAAD Thu, 15 Dec 2005 12:17:42 -0700
  • Re: Linear variation of Soil modulus Tue, 20 Dec 2005 03:42:30 -0700

• Kang, sung-hoon
  • Re: Light truck against concrete barrier Mon, 14 Nov 2005 16:05:29 -0700

• Kat Nelsk
  • on the aisc manual/specs Mon, 17 Oct 2005 13:19:59 -0600

• Keith Pabst
  • RE: Civil Engineering T-shirt available Thu, 13 Oct 2005 14:50:59 -0600

• Ken Peoples
  • square foot steel weights Tue, 8 Nov 2005 07:37:29 -0700

• Kestner, James W.
  • RE: diagonal corner reinforcement in cast-in-place diaphragms Wed, 12 Oct 2005 16:12:55 -0600
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 06:59:18 -0600
  • RE: upside down base plate Thu, 3 Nov 2005 11:59:50 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 15:46:52 -0700
  • RE: Signing & Sealing Drawings Fri, 11 Nov 2005 09:56:02 -0700
  • RE: singing and sealing / insurance Fri, 11 Nov 2005 10:12:12 -0700
  • RE: Composite Girders Tue, 22 Nov 2005 10:43:42 -0700
  • Thermally Cut Bolt Holes Thu, 1 Dec 2005 09:50:53 -0700
  • RE: Thermally Cut Bolt Holes Thu, 1 Dec 2005 11:11:02 -0700
  • RE: Thermally Cut Bolt Holes Thu, 1 Dec 2005 13:37:26 -0700
  • RE: steel beam and column connection Fri, 2 Dec 2005 08:07:59 -0700
  • RE: Corrosion in reinforcing steel in slabs Fri, 2 Dec 2005 15:04:47 -0700
  • RE: Concrete floor on wood trusses Tue, 6 Dec 2005 17:19:28 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 07:15:39 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 15:45:43 -0700

• Kevin Below
  • RE: Wood Roof Truss Issues Wed, 7 Dec 2005 18:03:44 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 18:17:08 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 18:40:13 -0700
  • RE: Column design Thu, 15 Dec 2005 18:41:12 -0700
  • RE: Joints in structural floor slab Thu, 15 Dec 2005 20:39:46 -0700
  • RE: Column design Thu, 15 Dec 2005 20:44:12 -0700
  • RE: SI Metric Thu, 22 Dec 2005 19:30:40 -0700

• Kevin Polin
  • 1 Hr Firewall UBC or HUD Thu, 13 Oct 2005 08:59:14 -0600
  • RE: 1 Hr Firewall UBC or HUD - Thanks Thu, 13 Oct 2005 09:18:54 -0600
  • RE: 1 Hr Firewall UBC or HUD - Thanks Again Thu, 13 Oct 2005 10:27:57 -0600
  • RE: reporting an architect Mon, 7 Nov 2005 10:43:43 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 11:48:33 -0700
  • RE: reporting an architect - What Happened Tue, 8 Nov 2005 09:46:23 -0700
  • RE: Your Opinion? Thu, 10 Nov 2005 23:05:09 -0700
  • RE: Bam-Iran Renewal Seminar on Dec 1, 3:30-5:00 Berkeley Campus Mon, 28 Nov 2005 19:27:35 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 14:32:53 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 15:21:46 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 11:02:39 -0700
  • RE: Informal Poll Fri, 16 Dec 2005 12:33:55 -0700

• Khashayar (Casey) Hemmatyar
  • WA & CA SE License Reciprocity (Exam de-briefing) Wed, 2 Nov 2005 11:40:07 -0700
  • re: journalist query - factors of safety Fri, 4 Nov 2005 15:02:08 -0700
  • RE: journalist query - factors of safety Fri, 4 Nov 2005 17:24:35 -0700
  • Electronic Version of "NDS 1997 Commentary " Tue, 8 Nov 2005 15:25:00 -0700
  • RE: Tilt-up & At-a-Distance task monitoring Thu, 17 Nov 2005 12:26:09 -0700
  • Staggered Truss - Seismi Mon, 21 Nov 2005 15:49:34 -0700

• Kipp Martin
  • Welding High Strength Bolts Wed, 26 Oct 2005 09:22:22 -0600

• Lloyd Pack
  • Re: reporting an architect Mon, 7 Nov 2005 10:53:11 -0700

• Lutz, James
  • RE: Dented light pole Wed, 5 Oct 2005 13:09:30 -0600
  • RE: Masonry Special Inspection Wed, 5 Oct 2005 14:58:12 -0600
  • RE: diagonal corner reinforcement in cast-in-place diaphragms Wed, 12 Oct 2005 16:22:15 -0600
  • RE: tick tock Tue, 18 Oct 2005 16:26:13 -0600

• M. David Finley, P.E., P.A.
  • PEMB - Tie Beam Thu, 6 Oct 2005 07:47:26 -0600
  • Floor Finish - Garbage Transfer Facility Wed, 19 Oct 2005 17:17:34 -0600
  • RE: Floor Finish - Garbage Transfer Facility Wed, 19 Oct 2005 17:46:39 -0600
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 12:10:02 -0600
  • Fixed Ladder Dimensions Thu, 3 Nov 2005 13:02:44 -0700
  • Galvanized Steel Iron Cross Tue, 8 Nov 2005 14:02:26 -0700
  • RE: Florida Dock Design Thu, 8 Dec 2005 17:17:50 -0700
  • RE: moonlighting Tue, 13 Dec 2005 07:09:23 -0700

• M.Zubair Asghar
  • RE: Contract Requirement in California Fri, 28 Oct 2005 07:54:53 -0600

• Mark
  • RE: Civil Engineering T-shirt available Thu, 13 Oct 2005 09:28:51 -0600

• Mark D. Baker
  • RE: Pile Modelling in CSI SAFE Mon, 10 Oct 2005 18:28:08 -0600
  • RE: Your Opinion? Fri, 11 Nov 2005 11:09:58 -0700
  • UBC 1633.2.6 Wed, 30 Nov 2005 09:40:26 -0700
  • fema 350 Mon, 19 Dec 2005 09:44:30 -0700
  • fema 350 Mon, 19 Dec 2005 11:37:07 -0700
  • RE: fema 350 Mon, 19 Dec 2005 12:13:06 -0700
  • RE: fema 350 Mon, 19 Dec 2005 12:31:49 -0700
  • RE: fema 350 Mon, 19 Dec 2005 12:47:42 -0700
  • bridge falsework design Wed, 21 Dec 2005 09:50:58 -0700

• Mark D. Webster
  • Structural Engineering Institute (SEI) Sustainability Committee Thu, 8 Dec 2005 13:54:10 -0700

• Mark E. Deardorff
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 00:05:58 -0600
  • RE: ICC Seismic Design 3.01 Thu, 3 Nov 2005 17:16:03 -0700
  • RE: ICC Seismic Design 3.01 Thu, 3 Nov 2005 17:20:10 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 10:19:56 -0700
  • Steel stud shear walls Fri, 11 Nov 2005 12:08:33 -0700
  • RE: Seismic Design Wed, 30 Nov 2005 16:28:43 -0700
  • RE: Drive Screw Nails? Tue, 13 Dec 2005 15:31:19 -0700
  • RE: Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 14:51:13 -0700
  • RE: Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 19:27:07 -0700
  • RE: Vulcraft Girder to WSP Diaphragm Connection Wed, 14 Dec 2005 22:30:10 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 11:42:54 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 13:39:18 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 13:41:11 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 22:31:15 -0700
  • RE: Availability of MC12's Fri, 16 Dec 2005 08:50:21 -0700
  • RE: Hooked anchor bolts Tue, 20 Dec 2005 11:48:07 -0700
  • RE: bridge falsework design Wed, 21 Dec 2005 10:47:47 -0700
  • RE: SI Metric Fri, 23 Dec 2005 11:06:00 -0700

• Mark Francois
  • Seismic Moment Connection into Column Web Mon, 10 Oct 2005 13:46:58 -0600
  • Re: WIND LOADS ON CANOPIES Thu, 27 Oct 2005 06:53:53 -0600
  • Re: fema 350 Tue, 20 Dec 2005 04:26:54 -0700

• Mark Gilligan
  • Re: Welding to Old Steel Mon, 17 Oct 2005 23:38:01 -0600
  • Re: shear studs Tue, 1 Nov 2005 10:28:34 -0700
  • RE: IBC2000 Seismic System Height Limits Wed, 30 Nov 2005 01:38:33 -0700

• Mark Johnson
  • Re: Modeling Helipad with Springs Mon, 7 Nov 2005 17:42:43 -0700
  • Re: Chart Excel For Engineering Usage Sun, 13 Nov 2005 22:24:50 -0700
  • Re: redwood gazebo Mon, 5 Dec 2005 13:30:08 -0700
  • OT: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 10:12:49 -0700
  • RE: fema 350 Mon, 19 Dec 2005 17:02:49 -0700
  • RE: FEMA 350 & ANSI/AISC 358-05 Mon, 19 Dec 2005 22:43:33 -0700
  • RE: FEMA 350 & ANSI/AISC 358-05 Tue, 20 Dec 2005 14:55:07 -0700

• Mark McCormick
  • Wood Roof Truss Issues Mon, 5 Dec 2005 12:03:37 -0700

• Mark Pemberton
  • redwood gazebo Mon, 5 Dec 2005 12:17:42 -0700
  • Re: Informal Poll Thu, 15 Dec 2005 12:08:03 -0700
  • Re: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 11:43:42 -0700
  • Concrete Density Wed, 28 Dec 2005 12:02:16 -0700

• Mark Puccio
  • Minimum Steel Beam Bearing Sun, 27 Nov 2005 10:26:19 -0700
  • RE: Minimum Steel Beam Bearing Wed, 30 Nov 2005 06:49:14 -0700

• Mark Remmetter
  • Signing & Sealing Drawings Thu, 10 Nov 2005 07:14:18 -0700
  • RE: Conc. Tilt-up w/ crane loads Wed, 30 Nov 2005 06:29:47 -0700

• Martin Li
  • RE: Mortar & sulfates Fri, 14 Oct 2005 10:24:49 -0600
  • RE: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 11:24:27 -0700

• Mateusz Podskarbi
  • RE: Translation from German Tue, 4 Oct 2005 07:54:19 -0600
  • RE: Modeling Helipad with Springs Fri, 4 Nov 2005 13:51:02 -0700

• Mauricio Salazar
  • Re: Architect cheating on structural calculations - where's the...... Wed, 7 Dec 2005 05:55:01 -0700
  • Re: Architect cheating on structural calculations - where's the...... Wed, 7 Dec 2005 05:57:18 -0700

• Maxwell, George
  • Seeking a Structural Engineer in the D.C. Area Mon, 19 Dec 2005 12:35:44 -0700

• mdeardorff
  • RE: Control Joints in a Mat Foundation Thu, 27 Oct 2005 17:00:25 -0600
  • RE: PCA Column by pacstrructurepoint / any other alternatives Mon, 31 Oct 2005 08:31:14 -0700
  • RE: shear studs Tue, 1 Nov 2005 09:40:43 -0700
  • RE: 2000 IBC Structural Design Manual Wed, 2 Nov 2005 13:19:02 -0700

• Meis, Kevin
  • Calling all Bay Area Structural Engineers Tue, 25 Oct 2005 15:04:38 -0600
  • Piping Designers Mon, 21 Nov 2005 15:37:17 -0700
  • Engineer Humor Thu, 8 Dec 2005 15:35:24 -0700

• Melnick, Scott
  • RE: on the aisc manual/specs Mon, 17 Oct 2005 15:26:37 -0600
  • RE: New AISC Specs Wed, 21 Dec 2005 17:06:18 -0700

• Meyer, Jonathan
  • RE: Nitronic 33 Rebar Thu, 8 Dec 2005 05:14:18 -0700

• Michael Bryson
  • RE: Masonry Special Inspection Thu, 6 Oct 2005 10:08:34 -0600

• Michael Hemstad
  • New year Tue, 4 Oct 2005 07:22:57 -0600
  • Pile Modelling in CSI SAFE Wed, 12 Oct 2005 07:49:08 -0600
  • Civil Engineering T-shirt available Thu, 13 Oct 2005 13:27:21 -0600
  • Welding to Old Steel Mon, 17 Oct 2005 15:28:00 -0600
  • interior applied product to stop ground water from wicking thru Wed, 16 Nov 2005 15:18:08 -0700
  • Wood Roof Truss Issues Tue, 6 Dec 2005 14:42:47 -0700
  • Bridge specs Thu, 15 Dec 2005 09:00:34 -0700

• MICHAEL MUSSETT
  • Re: Welding to Old Steel Mon, 17 Oct 2005 18:22:04 -0600

• Michael Zhang
  • RE: seaint Digest for 30 Oct 2005 Tue, 1 Nov 2005 17:51:57 -0700

• Michel Blangy
  • RE: tick tock Wed, 19 Oct 2005 15:56:28 -0600
  • RE: Exam de-briefing Wed, 2 Nov 2005 12:39:04 -0700
  • RE: Exam de-briefing Thu, 3 Nov 2005 08:42:37 -0700
  • Steel Base Plate Grout Tue, 8 Nov 2005 12:28:41 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 11:05:01 -0700

• Michelle Motchos
  • Re: Civil Engineering T-shirt available Thu, 13 Oct 2005 06:30:20 -0600
  • RE: Civil Engineering T-shirt available Thu, 13 Oct 2005 08:00:00 -0600

• Mike Jones
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 12:28:48 -0600
  • RE: crack monitor entertainment Thu, 1 Dec 2005 15:40:25 -0700
  • RE: crack monitor Fri, 2 Dec 2005 12:42:24 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Thu, 8 Dec 2005 13:35:36 -0700
  • RE: AISI Cold Formed Steel Design Thu, 8 Dec 2005 15:18:16 -0700
  • RE: Vent holes in BCI blocking Fri, 9 Dec 2005 06:33:42 -0700
  • RE: moonlighting Tue, 13 Dec 2005 09:58:18 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 07:42:29 -0700
  • RE: New AISC Specs Thu, 22 Dec 2005 06:00:46 -0700

• Mike Murphy
  • EX-CITY ENGINEER SUED IN FLOODING Wed, 26 Oct 2005 14:39:34 -0600

• Mike Zaitz
  • Stainless Steel Mon, 10 Oct 2005 06:26:27 -0600
  • RE: Informal Poll Thu, 15 Dec 2005 12:23:36 -0700

• Mlcse
  • Re: Roof Gathering Area Mon, 31 Oct 2005 16:08:21 -0700
  • Re: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 22:04:40 -0700

• Molly Skinner
  • RE: seaint Digest for 2 Nov 2005 Thu, 3 Nov 2005 11:25:59 -0700
  • 2005 AISC Seismic Provisions Thu, 29 Dec 2005 10:55:46 -0700

• Mr sadanand ojha
  • Linear variation of Soil modulus Fri, 9 Dec 2005 04:33:27 -0700

• mstuart
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 18:00:15 -0700

• MTD Ingenieros Asociados, S.A.
  • Re: Support condition of RCC frame whether fixed or hinged Thu, 29 Dec 2005 22:18:21 -0700

• Mueller, John
  • RE: 1 Hr Firewall UBC or HUD Thu, 13 Oct 2005 09:18:28 -0600
  • RE: Terrace Paver Support Fri, 28 Oct 2005 19:33:04 -0600
  • RE: shear studs Tue, 1 Nov 2005 09:38:45 -0700
  • RE: interior applied product to stop ground water from wicking thru existing basement walls? Tue, 15 Nov 2005 12:28:57 -0700
  • questions about ASTM E1300-04 Mon, 5 Dec 2005 14:12:18 -0700

• Neil Moore
  • Re: corrosion from ocean flooding Sun, 2 Oct 2005 10:39:33 -0600
  • re: RC Design Basic Program Listing by E. Nawy Mon, 17 Oct 2005 23:09:25 -0600
  • Re: Sign post embedded in concrete footing Wed, 19 Oct 2005 15:14:44 -0600
  • Re: Sign post embedded in concrete footing Wed, 19 Oct 2005 21:45:27 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 14:34:50 -0600
  • Re: Sign post embedded in concrete footing Thu, 20 Oct 2005 16:37:37 -0600
  • RE: Sign post embedded in concrete footing Thu, 20 Oct 2005 17:54:38 -0600
  • Re: Tue, 25 Oct 2005 13:04:22 -0600
  • Re: Concrete at sign pole base Wed, 26 Oct 2005 08:08:20 -0600
  • Re: Fwd: Doug Copp - Mr. Karasik's client Fri, 2 Dec 2005 17:23:12 -0700
  • Re: Corrosion in reinforcing steel in slabs Sun, 4 Dec 2005 21:23:53 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 15:37:00 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Thu, 8 Dec 2005 08:11:02 -0700
  • RE: Giants, Frogs, et al Sat, 10 Dec 2005 07:48:16 -0700
  • Re: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 10:53:47 -0700
  • RE: Typical SIP roof to SIP wall connection Thu, 15 Dec 2005 21:06:23 -0700
  • Re: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 10:06:38 -0700
  • Re: IBC 2003 Section 1621.2.6.1? Mon, 19 Dec 2005 20:19:49 -0700

• Nels Roselund
  • Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 16:12:37 -0700
  • RE: half height steel nuts Wed, 16 Nov 2005 17:47:47 -0700
  • RE: Concrete or Masonry Infill Thu, 17 Nov 2005 15:17:15 -0700
  • RE: Concrete or Masonry Infill Thu, 17 Nov 2005 19:46:02 -0700
  • RE: crack monitor Thu, 1 Dec 2005 10:03:44 -0700
  • Foundation Soil Characteristics by Surface Wave Sounding Thu, 1 Dec 2005 16:39:47 -0700
  • RE: Vent holes in BCI blocking Thu, 8 Dec 2005 19:11:06 -0700
  • RE: Pole-Type Footing in Seismic Zone 3 (1997 UBC) Wed, 14 Dec 2005 21:28:26 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 12:22:04 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 18:56:12 -0700
  • Sulfate Attack Wed, 28 Dec 2005 12:41:17 -0700
  • Old Glu-Lam Combinations Thu, 29 Dec 2005 10:09:06 -0700

• njineer
  • RE: Non-orthogonal lateral system Mon, 26 Dec 2005 10:46:12 -0700

• Nuttall, Davin J.
  • RE: PEMB - Tie Beam Thu, 6 Oct 2005 08:12:55 -0600
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 16:13:58 -0700
  • Cold Weather Reinf. Masonry Wed, 14 Dec 2005 09:24:38 -0700
  • RE: Old Glu-Lam Combinations Thu, 29 Dec 2005 10:30:20 -0700

• Oisin Gibson
  • RE: seaint Digest for 9 Nov 2005 Thu, 10 Nov 2005 09:23:33 -0700

• pacific.science
  • Re: PEMB - Tie Beam Thu, 6 Oct 2005 08:57:00 -0600
  • re: 1994 UBC & SE Manual on eBay Thu, 6 Oct 2005 09:12:06 -0600

• Padmanabhan Rajendran
  • RE: Translation from German Wed, 5 Oct 2005 08:15:14 -0600
  • Re: Dented light pole Wed, 5 Oct 2005 14:05:14 -0600
  • Geotech info Thu, 20 Oct 2005 15:22:36 -0600
  • Re: STAAD Question Tue, 29 Nov 2005 10:13:08 -0700
  • Re: crack monitor entertainment sheldon karasik Fri, 2 Dec 2005 07:14:59 -0700
  • Re: crack monitor entertainment sheldon karasik Fri, 2 Dec 2005 12:20:24 -0700
  • Re: Fw: crack monitor entertainment Fri, 2 Dec 2005 14:07:33 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 10:58:23 -0700
  • Re: Linear variation of Soil modulus Fri, 9 Dec 2005 14:32:11 -0700
  • Re: Column design Thu, 15 Dec 2005 19:02:34 -0700
  • Re: Moment releases for RCC beam to beam connection in STAAD Thu, 22 Dec 2005 13:25:01 -0700

• Paul Feather
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 12:40:16 -0600
  • Re: Tree live load Mon, 17 Oct 2005 09:12:28 -0600
  • Re: Contract Requirement in California Tue, 25 Oct 2005 12:41:37 -0600
  • Re: Contract Requirement in California Wed, 26 Oct 2005 10:10:11 -0600
  • Re: California contract law Tue, 1 Nov 2005 14:57:51 -0700
  • Re: California contract law Tue, 1 Nov 2005 16:05:19 -0700
  • Re: California contract law Tue, 1 Nov 2005 16:36:52 -0700
  • Re: California contract law Wed, 2 Nov 2005 09:14:36 -0700
  • Re: 2000 IBC Structural Design Manual Wed, 2 Nov 2005 12:55:42 -0700
  • Re: journalist query - factors of safety Fri, 4 Nov 2005 10:30:10 -0700
  • Re: California contract law: BORPELS Fri, 4 Nov 2005 11:18:42 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 18:26:25 -0700
  • Re: Doug Copp Fri, 2 Dec 2005 12:43:04 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Tue, 6 Dec 2005 18:19:28 -0700
  • Re: Concrete floor on wood trusses Tue, 6 Dec 2005 18:36:58 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 09:44:29 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 09:03:37 -0700
  • Re: And you think you have plan check problems... Thu, 8 Dec 2005 12:32:58 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 16:54:14 -0700
  • Re: Informal Poll Thu, 15 Dec 2005 16:05:00 -0700
  • Concrete aggregate ASTM spec Fri, 23 Dec 2005 11:28:28 -0700
  • Aggregate Spec (Re-post) Wed, 28 Dec 2005 16:51:44 -0700
  • Re: Aggregate Spec (Re-post) Thu, 29 Dec 2005 14:11:46 -0700

• Paul Ransom
  • Re: ENERCALC Sat, 1 Oct 2005 12:47:14 -0600
  • Re: wind load / curtain wall Sat, 1 Oct 2005 12:47:59 -0600
  • Re: S-Frame/P-Frame Sat, 1 Oct 2005 12:49:25 -0600
  • Re: ENERCALC Mon, 3 Oct 2005 07:05:20 -0600
  • Re: Dongles Tue, 4 Oct 2005 07:42:47 -0600
  • Re: Signing & Sealing Drawings Fri, 11 Nov 2005 09:45:06 -0700
  • Re: Reinforce a ZEE purlin Fri, 11 Nov 2005 09:47:05 -0700
  • Re: Reinforce a ZEE purlin Sat, 12 Nov 2005 08:54:15 -0700
  • Re: Reinforce a ZEE purlin Sat, 12 Nov 2005 08:55:02 -0700
  • Re: Re: crack monitor entertainment Fri, 2 Dec 2005 22:42:06 -0700
  • Re: crack monitor entertainment sheldon karasik Fri, 2 Dec 2005 22:43:44 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 17 Dec 2005 15:55:53 -0700
  • CDN regulatory enviroment [was Typical SIP roof to SIP wall connection] Sun, 18 Dec 2005 10:20:52 -0700
  • Macintel [was Microsoft Word format screw-up---Help!] Sun, 18 Dec 2005 10:21:14 -0700
  • RE: The 13th Ed. of AISC Manual Tue, 20 Dec 2005 20:06:36 -0700
  • Re: how thick steel angle ok for self tapping screws? Tue, 20 Dec 2005 20:10:09 -0700
  • Re: AISI Cold Formed Steel Design Tue, 20 Dec 2005 20:11:35 -0700
  • Re: SI Metric Fri, 23 Dec 2005 12:57:56 -0700
  • Re: SI Metric Sat, 24 Dec 2005 10:05:45 -0700
  • Re: Column Design Fri, 30 Dec 2005 12:24:22 -0700

• Paul Skidmore
  • RE: Design of Glass as a Shear Wall Thu, 20 Oct 2005 18:42:27 -0600

• pfeather
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 18:17:47 -0700

• PFFEI
  • ibc adoption Wed, 16 Nov 2005 08:02:20 -0700

• pjspe
  • Re: sj joists? - rusting of top chords Tue, 29 Nov 2005 06:40:48 -0700
  • Re: sj joists? - rusting of top chords Tue, 29 Nov 2005 10:26:39 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 07:24:45 -0700
  • Re: Wood Roof Truss Issues Mon, 5 Dec 2005 13:13:56 -0700

• Polhemus, Bill
  • NACE Certifications Mon, 10 Oct 2005 07:52:10 -0600
  • Modeling Helipad with Springs Fri, 4 Nov 2005 13:32:00 -0700
  • Re: Modeling Helipad with Springs Mon, 7 Nov 2005 13:20:02 -0700
  • Re: reporting an architect Wed, 9 Nov 2005 07:50:45 -0700
  • RE: Jumping to Conclusions Wed, 9 Nov 2005 08:08:04 -0700
  • RE: Bam-Iran Renewal Seminar on Dec 1, 3:30-5:00 Berkeley Campus Mon, 28 Nov 2005 07:34:59 -0700
  • Sheldon Leonard? Mon, 5 Dec 2005 07:35:56 -0700
  • RE: Way Off Topic: Holiday Humor Fri, 9 Dec 2005 08:24:36 -0700
  • RE: STAAD Surface Elements Fri, 9 Dec 2005 08:52:13 -0700
  • RE: Linear variation of Soil modulus Fri, 9 Dec 2005 09:55:21 -0700
  • Giants, Frogs, et al Fri, 9 Dec 2005 11:17:23 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Fri, 9 Dec 2005 11:30:36 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 12:53:30 -0700
  • RE: Way Off Topic: Holiday Humor Fri, 9 Dec 2005 12:56:31 -0700
  • RE: Linear variation of Soil modulus Fri, 9 Dec 2005 14:13:59 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 15:37:29 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 16:01:15 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 16:09:57 -0700
  • RE: Giants, Frogs, et al Sat, 10 Dec 2005 07:19:42 -0700
  • RE: Way Off Topic: Holiday Humor Sat, 10 Dec 2005 07:22:47 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 07:25:02 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Sat, 10 Dec 2005 07:31:58 -0700
  • RE: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 07:32:21 -0700
  • RE: OT: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 07:43:17 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 07:47:06 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 07:59:41 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 08:10:30 -0700
  • Publications or Programs on Marketing Strategies Mon, 12 Dec 2005 09:59:36 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 11:56:58 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 14:20:32 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 14:42:19 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 15:32:06 -0700
  • SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc. Mon, 12 Dec 2005 15:48:53 -0700
  • Decision Makers [WAS: Marketing Strategies] Mon, 12 Dec 2005 16:10:57 -0700
  • RE: Re :Lawyers - was Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 16:11:05 -0700
  • RE: SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc. Tue, 13 Dec 2005 07:32:42 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 07:38:28 -0700
  • RE: SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc. Tue, 13 Dec 2005 07:53:20 -0700
  • RE: non-load bearing gable end walls Tue, 13 Dec 2005 08:07:13 -0700
  • RE: Decision Makers [WAS: Marketing Strategies] Tue, 13 Dec 2005 10:11:02 -0700
  • RE: moonlighting Tue, 13 Dec 2005 15:22:09 -0700
  • RE: concrete topping? on metal deck over timber structure. Wed, 14 Dec 2005 13:58:35 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 14:48:22 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 16:02:07 -0700
  • RE: Availability of MC12's Fri, 16 Dec 2005 08:26:57 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 09:08:24 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 09:29:04 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 12:13:15 -0700
  • RE: Informal Poll Fri, 16 Dec 2005 13:03:29 -0700
  • RE: Happy Holidays "Structural Plans" Fri, 16 Dec 2005 13:42:58 -0700
  • RE: Informal Poll Fri, 16 Dec 2005 13:58:05 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 14:34:49 -0700
  • RE: The 13th Ed. of AISC Manual Mon, 19 Dec 2005 06:57:14 -0700
  • RE: The 13th Ed. of AISC Manual Mon, 19 Dec 2005 07:00:06 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 10:43:44 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 13:29:01 -0700
  • RE: Bridge slide bearings Mon, 19 Dec 2005 13:57:13 -0700
  • RE: Costly seminars and Code corrections Mon, 19 Dec 2005 14:02:58 -0700
  • RE: Costly seminars and Code corrections Tue, 20 Dec 2005 07:03:11 -0700
  • RE: Costly seminars and Code corrections Tue, 20 Dec 2005 07:04:19 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 07:09:01 -0700
  • RE: Costly seminars and Code corrections Tue, 20 Dec 2005 07:27:56 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 08:33:02 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 08:36:13 -0700
  • RE: dynamic foundations Tue, 27 Dec 2005 07:17:24 -0700
  • RE: Obscure Units Tue, 27 Dec 2005 07:24:24 -0700
  • RE: Obscure Units Tue, 27 Dec 2005 09:40:41 -0700
  • RE: Moment releases for RCC beam to beam connection in STAAD Tue, 27 Dec 2005 10:58:23 -0700
  • RE: Obscure Units Tue, 27 Dec 2005 15:20:18 -0700
  • RE: New AISC Steel Spec Wed, 28 Dec 2005 19:51:47 -0700
  • RE: Column Design Thu, 29 Dec 2005 03:45:30 -0700
  • RE: Obscure Units Thu, 29 Dec 2005 04:02:55 -0700
  • RE: Obscure Units Thu, 29 Dec 2005 04:05:25 -0700
  • RE: AISC 13th Edition Fri, 30 Dec 2005 08:38:15 -0700
  • RE: AISC 13th Edition Fri, 30 Dec 2005 12:42:45 -0700

• Puskas, David
  • Isolated pole deep (flagpole) questions. Thu, 20 Oct 2005 09:05:29 -0600

• Rand W Holtham
  • RE: Happy Holidays "Structural Plans" Sat, 17 Dec 2005 06:28:51 -0700
  • RE: fema 350 Mon, 19 Dec 2005 13:02:10 -0700
  • RE: Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Thu, 22 Dec 2005 13:59:02 -0700
  • Re: OT: Seasons Greetings Tue, 27 Dec 2005 05:48:36 -0700

• Randall Moore, PE, SE
  • Re: Dented light pole Wed, 5 Oct 2005 13:26:19 -0600
  • non-load bearing gable end walls Mon, 12 Dec 2005 21:25:34 -0700
  • Re: non-load bearing gable end walls Tue, 13 Dec 2005 22:08:22 -0700
  • Re: dynamic foundations Tue, 20 Dec 2005 21:06:34 -0700

• Ray Pixley
  • Hot Sulfur and Concrete (was Re: seaint Digest for 30 Oct 2005) Wed, 2 Nov 2005 14:37:48 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 06:17:13 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 11:20:08 -0700

• Raymond Shreenan
  • Re: Corrosion in reinforcing steel in slabs Fri, 2 Dec 2005 19:08:33 -0700

• Rbengrguy
  • Re: 3rd ANNUAL SEAOI MIDWEST BRIDGE SYMPOSIUM Thu, 17 Nov 2005 04:04:55 -0700

• refugio rochin
  • Allowable Stress Design of a Concrete Beam Fri, 14 Oct 2005 10:32:39 -0600
  • re: i need academic computer program for underground storage tank structure Tue, 18 Oct 2005 07:29:47 -0600
  • Column- Beam Moment Ratio Wed, 26 Oct 2005 16:36:04 -0600
  • Beam - Moment Ratio Sun, 30 Oct 2005 05:11:40 -0700
  • Doug Copp Sun, 30 Oct 2005 05:19:05 -0700
  • Re: Your Opinion ? Fri, 11 Nov 2005 11:14:34 -0700
  • STAAD Question Tue, 29 Nov 2005 08:54:56 -0700
  • Re: STAAD Question Tue, 29 Nov 2005 12:10:27 -0700
  • Re: Conc. Tilt-up w/ crane loads Tue, 29 Nov 2005 15:03:09 -0700
  • Re: Conc. Tilt-up w/ crane loads [Zabasearch] Wed, 30 Nov 2005 06:38:19 -0700
  • Re: STAAD Question Wed, 30 Nov 2005 07:31:13 -0700
  • Follow Up on Vertical Component of EQ in UBC97 and IBC2000 Thu, 1 Dec 2005 00:56:40 -0700
  • Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 08:28:27 -0700
  • Re: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 09:41:05 -0700
  • Re: steel beam and column connection Fri, 2 Dec 2005 07:22:19 -0700
  • Column/Shear Wall Sizing - Flat Slab Construction - General Rules Thu, 8 Dec 2005 09:21:41 -0700
  • STAAD Surface Elements Fri, 9 Dec 2005 08:28:26 -0700
  • STAAD surface elements Sat, 10 Dec 2005 09:52:28 -0700
  • seismic design with columns into flat slabs? Mon, 12 Dec 2005 15:55:11 -0700
  • SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc. Tue, 13 Dec 2005 05:45:41 -0700
  • SOFTWARE COMPARISONS: SAP 2000 vs. VisualAnalysis/RISA, etc Wed, 14 Dec 2005 06:59:51 -0700
  • OT derived from The 13th Ed. of AISC Manual Fri, 23 Dec 2005 05:43:16 -0700
  • RC Lateral Resistance in STAAD? ( ACI 10.10, and 10.11 ) Thu, 29 Dec 2005 11:21:39 -0700
  • Fwd: RC Lateral Resistance in STAAD? ( ACI 10.10, and 10.11 ) Thu, 29 Dec 2005 15:31:17 -0700
  • Re: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 08:21:22 -0700
  • Re: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 09:21:34 -0700
  • Re: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 09:28:38 -0700
  • Re: AISC 13th Edition Fri, 30 Dec 2005 09:49:43 -0700
  • ASCE 7 Story Drift & STAAD Fri, 30 Dec 2005 13:18:44 -0700

• Rhkratzse
  • Re: wind load / curtain wall Sat, 1 Oct 2005 16:57:14 -0600
  • Re: LA Times Article - Vulnerable Concrete Buildings Wed, 12 Oct 2005 14:39:47 -0600
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 14:44:31 -0600
  • Re: Tree live load Sat, 15 Oct 2005 15:37:08 -0600
  • Re: Truck wheel loads? Thanks to all! Sun, 16 Oct 2005 21:23:01 -0600
  • Re: Control Joints in a Mat Foundation Thu, 27 Oct 2005 14:22:49 -0600
  • Re: Control Joints in a Mat Foundation Fri, 28 Oct 2005 14:04:42 -0600
  • Re: Roof Gathering Area Mon, 31 Oct 2005 13:23:30 -0700
  • Re: upside down base  plate Thu, 3 Nov 2005 10:04:30 -0700
  • Base isolation for homes? Thu, 3 Nov 2005 10:07:02 -0700
  • Re: Base isolation for homes? Thu, 3 Nov 2005 21:41:40 -0700
  • Re: Base isolation for homes? Fri, 4 Nov 2005 17:47:23 -0700
  • Re: California contract law BORPELS Sat, 5 Nov 2005 12:28:07 -0700
  • Re: California contract law BORPELS Sat, 5 Nov 2005 20:50:46 -0700
  • Re: Job Vacancy -- in Nigeria Wed, 9 Nov 2005 13:41:31 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 17:46:23 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 18:29:47 -0700
  • Re: Moment frames / wood construction Wed, 16 Nov 2005 09:03:09 -0700
  • Re: Possible Louisiana Code Provision Wed, 16 Nov 2005 18:56:14 -0700
  • Re: Conc. Tilt-up w/ crane loads [Zabasearch] Tue, 29 Nov 2005 20:01:10 -0700
  • Re: Demo Gehry buildings Tue, 29 Nov 2005 20:07:15 -0700
  • Re: Minimum Steel Beam Bearing Tue, 29 Nov 2005 20:10:17 -0700
  • Re: Demo Gehry buildings Tue, 29 Nov 2005 23:23:58 -0700
  • Re: Wood Roof Truss Issues Mon, 5 Dec 2005 12:09:39 -0700
  • Re: redwood gazebo Mon, 5 Dec 2005 12:41:09 -0700
  • Re: redwood gazebo Tue, 6 Dec 2005 14:10:56 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 15:33:55 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 18:51:30 -0700
  • Re: Concrete floor on wood trusses Tue, 6 Dec 2005 19:07:42 -0700
  • Re: Bamboo Reinforcement (was Re: Concrete floor on wood trusses) Wed, 7 Dec 2005 09:21:00 -0700
  • OT: Microsoft Word format screw-up---Help! Sat, 10 Dec 2005 00:30:18 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 10:49:51 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 12 Dec 2005 10:56:21 -0700
  • Re: OT:  RHK is published Tue, 13 Dec 2005 21:29:57 -0700
  • Re: OT:  RHK is published Wed, 14 Dec 2005 18:43:06 -0700
  • Re: Microsoft Word format screw-up---Help! Thu, 15 Dec 2005 19:54:02 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 12:38:40 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 12:53:08 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 12:59:45 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:04:50 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:09:41 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:31:56 -0700
  • Re: Microsoft Word format screw-up---Help! [A final thanks!] Sat, 17 Dec 2005 10:15:49 -0700

• Rich Kip
  • USGS site and Google Maps Fri, 7 Oct 2005 15:23:35 -0600

• Rich Lewis
  • RE: overturning Mon, 10 Oct 2005 07:37:42 -0600
  • RE: Tree live load Sat, 15 Oct 2005 15:07:27 -0600
  • Reinforce a ZEE purlin Thu, 10 Nov 2005 14:16:19 -0700
  • Repair Tilt-up Panel Spalling Thu, 10 Nov 2005 16:14:53 -0700
  • RE: Repair Tilt-up Panel Spalling Thu, 10 Nov 2005 20:32:14 -0700
  • RE: Reinforce a ZEE purlin Fri, 11 Nov 2005 10:49:25 -0700
  • RE: Reinforce a ZEE purlin Fri, 11 Nov 2005 10:59:12 -0700
  • Supporting Brick Above Low Roof Fri, 18 Nov 2005 12:58:47 -0700
  • RE: Supporting Brick Above Low Roof Mon, 21 Nov 2005 12:50:45 -0700
  • Occupancy Load for a Running Track Mon, 5 Dec 2005 15:24:56 -0700
  • Vapor Barrier Below Suspended Slab Thu, 15 Dec 2005 08:27:04 -0700
  • Joints in structural floor slab Thu, 15 Dec 2005 18:51:58 -0700
  • RE: dynamic foundations Tue, 20 Dec 2005 16:16:11 -0700
  • OT - Business credit card Sat, 24 Dec 2005 10:10:01 -0700
  • RE: dynamic foundations Tue, 27 Dec 2005 17:17:15 -0700
  • RE: ADT vs vanilla AutoCAD? Tue, 27 Dec 2005 17:32:57 -0700

• rizmirza
  • Re: Column design Mon, 19 Dec 2005 20:58:25 -0700

• rlhess
  • RE: My Talking Stick Experience Fri, 4 Nov 2005 18:29:25 -0700

• RLHess(--nospam--at)HessEng.com
  • RE: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 19:44:14 -0700
  • RE: Plywood shearwall over plywood Wed, 9 Nov 2005 18:38:08 -0700
  • RE: Pole-Type Footing in Seismic Zone 3 (1997 UBC) Wed, 14 Dec 2005 20:05:41 -0700

• Rob Still
  • Concrete Shear Wall / Shear Cores Tue, 4 Oct 2005 07:10:35 -0600

• Robert Freeman
  • repair to tilt-up panel with corrosion Thu, 10 Nov 2005 16:41:37 -0700
  • Wood moment connection Mon, 14 Nov 2005 20:12:53 -0700
  • Gyp. Board ceiling diaphragm Wed, 30 Nov 2005 11:13:59 -0700
  • Corrosion in reinbar in slabs Fri, 2 Dec 2005 17:20:28 -0700
  • CIP column design Thu, 15 Dec 2005 18:13:48 -0700

• Robert Kazanjy
  • Re: Gypsum board for bracing in 03 IBC Seismic Design Category D Thu, 6 Oct 2005 20:53:53 -0600
  • Re: Stainless Steel Mon, 10 Oct 2005 20:58:18 -0600
  • Re: common rebar grade Fri, 14 Oct 2005 08:54:09 -0600
  • Re: Roof Gathering Area Mon, 31 Oct 2005 23:59:14 -0700
  • Re: Base isolation for homes? Thu, 3 Nov 2005 21:18:13 -0700
  • Re: Base isolation for homes? Fri, 4 Nov 2005 11:42:36 -0700
  • Re: Modeling Helipad with Springs Mon, 7 Nov 2005 15:47:46 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 16:03:12 -0700
  • Re: NCEES Obtains Copyright Infringement Judgment against Examinee Mon, 7 Nov 2005 16:09:53 -0700
  • Re: Continuous Ridge Vents Wed, 9 Nov 2005 13:39:06 -0700
  • Re: Steel stud shear walls Fri, 11 Nov 2005 12:32:25 -0700
  • Re: Garbage truck incident in Illinois Fri, 11 Nov 2005 12:47:09 -0700
  • Re: Bill of materials software Wed, 16 Nov 2005 00:25:39 -0700
  • Re: Bill of materials software Wed, 16 Nov 2005 00:32:10 -0700
  • Re: Demo Gehry buildings Tue, 29 Nov 2005 23:12:25 -0700
  • Re: Thermally Cut Bolt Holes Thu, 1 Dec 2005 10:44:12 -0700
  • Re: Concrete floor on wood trusses Wed, 7 Dec 2005 02:10:23 -0700
  • Re: Nitronic 33 rebar Wed, 7 Dec 2005 20:55:38 -0700
  • Re: Publications or Programs on Marketing Strategies Mon, 12 Dec 2005 15:05:12 -0700

• Roger Davis
  • RE: MathCad Tue, 4 Oct 2005 08:06:51 -0600
  • RE: common rebar grade Fri, 14 Oct 2005 07:01:04 -0600
  • RE: Base isolation for homes? Fri, 4 Nov 2005 10:00:27 -0700
  • RE: Continuous Ridge Vents Wed, 9 Nov 2005 11:16:09 -0700

• S. Gordin
  • Re: Gypsum board for bracing in 03 IBC Seismic Design Category D Thu, 6 Oct 2005 16:33:02 -0600
  • Re: Gypsum board for bracing in 03 IBC Seismic Design Category D Thu, 6 Oct 2005 22:32:03 -0600
  • Re: Gypsum board for bracing in 03 IBC Seismic Design Category D Thu, 6 Oct 2005 22:57:20 -0600
  • Re: Civil Engineering T-shirt available Wed, 12 Oct 2005 11:07:05 -0600
  • Re: Civil Engineering T-shirt available Thu, 13 Oct 2005 14:44:23 -0600
  • Re: Civil Engineering T-shirt available Thu, 13 Oct 2005 15:13:32 -0600
  • Re: Tee Shirts Thu, 13 Oct 2005 15:47:04 -0600
  • Re: Welding to Old Steel Mon, 17 Oct 2005 16:27:39 -0600
  • Re: Welding to Old Steel Mon, 17 Oct 2005 21:09:25 -0600
  • Re: Welding to Old Steel Wed, 19 Oct 2005 08:20:59 -0600
  • Re: tick tock Wed, 19 Oct 2005 10:17:21 -0600
  • Re: Sign post embedded in concrete footing Wed, 19 Oct 2005 12:31:12 -0600
  • shear studs Mon, 31 Oct 2005 11:18:18 -0700
  • Re: shear studs Mon, 31 Oct 2005 12:36:46 -0700
  • Re: shear studs Tue, 1 Nov 2005 09:43:17 -0700
  • Re: shear studs Tue, 1 Nov 2005 10:42:26 -0700
  • Re: shear studs Tue, 1 Nov 2005 11:41:24 -0700
  • Re: California contract law Tue, 1 Nov 2005 12:27:55 -0700
  • Re: California contract law Tue, 1 Nov 2005 13:53:19 -0700
  • Re: California contract law Tue, 1 Nov 2005 14:10:39 -0700
  • Re: California contract law Tue, 1 Nov 2005 14:30:12 -0700
  • Re: California contract law Tue, 1 Nov 2005 15:27:03 -0700
  • Re: California contract law Tue, 1 Nov 2005 16:48:27 -0700
  • Re: seaint Digest for 30 Oct 2005 Tue, 1 Nov 2005 20:39:11 -0700
  • Re: California contract law Wed, 2 Nov 2005 11:15:09 -0700
  • California contract law: BORPELS Fri, 4 Nov 2005 10:42:09 -0700
  • Re: California contract law: BORPELS Fri, 4 Nov 2005 11:39:36 -0700
  • Re: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 23:40:03 -0700
  • Re: Job Vacancy -- in Nigeria Wed, 9 Nov 2005 15:07:06 -0700
  • Re: Plywood shearwall over plywood Thu, 10 Nov 2005 08:57:33 -0700
  • Re: Plywood shearwall over plywood Thu, 10 Nov 2005 09:21:25 -0700
  • Re: Repair Tilt-up Panel Spalling Thu, 10 Nov 2005 17:06:48 -0700
  • Re: Moment frames / wood construction Mon, 14 Nov 2005 23:38:43 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 11:43:08 -0700
  • Re: Moment frames / wood construction Wed, 16 Nov 2005 17:03:17 -0700
  • basement sealant (Scott Haan) Wed, 16 Nov 2005 18:57:28 -0700
  • Re: half height steel nuts Thu, 17 Nov 2005 11:55:24 -0700
  • Re: half height steel nuts Fri, 18 Nov 2005 08:33:28 -0700
  • Re: basement sealant (Scott Haan) and further questions Fri, 18 Nov 2005 10:57:26 -0700
  • RE: UBC 1632.2 Shallow Anchors Question Tue, 29 Nov 2005 10:52:59 -0700
  • Re: SLAB-PILE INTERACTION Tue, 29 Nov 2005 15:40:30 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 15:55:50 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 16:07:21 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 16:12:56 -0700
  • Re: crack monitor entertainment Thu, 1 Dec 2005 16:13:09 -0700
  • Re: crack monitor entertainment sheldon karasik Thu, 1 Dec 2005 22:41:28 -0700
  • Re: crack monitor entertainment Fri, 2 Dec 2005 11:15:41 -0700
  • Re: Doug Copp - Sheldon Karasik info Fri, 2 Dec 2005 14:18:49 -0700
  • Re: Concrete floor on wood trusses Tue, 6 Dec 2005 15:58:10 -0700
  • Re: Wood Roof Truss Issues Tue, 6 Dec 2005 17:37:18 -0700
  • Re: Concrete floor on wood trusses Tue, 6 Dec 2005 18:45:51 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 13:16:11 -0700
  • Re: And you think you have plan check problems... Thu, 8 Dec 2005 13:29:44 -0700
  • Re: Vent holes in BCI blocking Thu, 8 Dec 2005 21:26:25 -0700
  • Re: moonlighting Tue, 13 Dec 2005 08:38:28 -0700
  • Re: moonlighting Tue, 13 Dec 2005 14:49:06 -0700
  • geo book Thu, 15 Dec 2005 09:17:09 -0700
  • Re: Informal Poll Thu, 15 Dec 2005 15:08:49 -0700

• sadanand ojha
  • Let's share photos Wed, 21 Dec 2005 05:55:30 -0700

• Samual Deng
  • [no subject] Thu, 6 Oct 2005 17:18:58 -0600

• Santanu Das
  • Your email has been forwarded to santanu.das(--nospam--at)bentley.com. Tue, 20 Dec 2005 01:07:50 -0700

• Santhosh Kumar Yedidi
  • Column Design Wed, 28 Dec 2005 22:35:58 -0700
  • Re: Column Design Thu, 29 Dec 2005 04:28:30 -0700
  • Re: Column Design Fri, 30 Dec 2005 01:29:43 -0700
  • Footing design Fri, 30 Dec 2005 01:36:27 -0700

• Scott . M . Haan
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 17:55:37 -0700

• Scott Maxwell
  • Re: ENERCALC Sun, 2 Oct 2005 02:01:51 -0600
  • RE: MathCad Tue, 4 Oct 2005 11:15:10 -0600
  • Re: Masonry Special Inspection Wed, 5 Oct 2005 15:11:04 -0600
  • Re: LA Times Article - Vulnerable Concrete Buildings Tue, 11 Oct 2005 15:43:51 -0600
  • Re: on the aisc manual/specs Mon, 17 Oct 2005 14:01:32 -0600
  • RE: on the aisc manual/specs Mon, 17 Oct 2005 16:21:03 -0600
  • Re: tick tock Tue, 18 Oct 2005 23:10:31 -0600
  • RE: tick tock Tue, 18 Oct 2005 23:14:39 -0600
  • Re: tick tock Wed, 19 Oct 2005 10:04:20 -0600
  • Re: Concrete at sign pole base Tue, 25 Oct 2005 15:21:15 -0600
  • RE: Tue, 25 Oct 2005 15:24:13 -0600
  • Re: Concrete at sign pole base Wed, 26 Oct 2005 07:38:19 -0600
  • RE: California contract law Tue, 1 Nov 2005 16:07:40 -0700
  • Re: California contract law Tue, 1 Nov 2005 20:41:15 -0700
  • Re: WA & CA SE License Reciprocity (Exam de-briefing) Wed, 2 Nov 2005 12:14:33 -0700
  • Re: Exam de-briefing Wed, 2 Nov 2005 12:18:55 -0700
  • RE: Exam de-briefing Wed, 2 Nov 2005 15:54:55 -0700
  • RE: California contract law Wed, 2 Nov 2005 16:12:57 -0700
  • Re: Exam de-briefing Thu, 3 Nov 2005 03:52:31 -0700
  • Re: My Talking Stick Experience Fri, 4 Nov 2005 17:59:56 -0700
  • Re: California contract law BORPELS Sat, 5 Nov 2005 23:16:27 -0700
  • Re: NCEES Obtains Copyright Infringement Judgment against Examinee Mon, 7 Nov 2005 11:40:48 -0700
  • Re: reporting an architect Mon, 7 Nov 2005 12:08:43 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 12:13:29 -0700
  • Re: Lateral Load Due to Foot-Traffic Tue, 8 Nov 2005 17:36:28 -0700
  • Re: Signing & Sealing Drawings Thu, 10 Nov 2005 13:42:42 -0700
  • Re: Signing & Sealing Drawings Thu, 10 Nov 2005 21:31:51 -0700
  • Re: Your Opinion? Thu, 10 Nov 2005 21:41:13 -0700
  • RE: Your Opinion? Fri, 11 Nov 2005 09:45:29 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 13:06:06 -0700
  • Re: CA Seismic Principles and Engineering Surveying Exam Tue, 15 Nov 2005 13:39:42 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 14:58:42 -0700
  • Re: Moment frames / wood construction Tue, 15 Nov 2005 22:39:25 -0700
  • Re: ibc adoption Wed, 16 Nov 2005 08:38:48 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 16:14:48 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 16:19:03 -0700
  • Re: Moment frames / wood construction Wed, 16 Nov 2005 16:37:25 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 17:04:03 -0700
  • Re: Moment frames / wood construction Wed, 16 Nov 2005 17:30:51 -0700
  • RE: Tilt-up & At-a-Distance task monitoring Fri, 18 Nov 2005 02:11:09 -0700
  • Re: Tilt-up & At-a-Distance task monitoring Fri, 18 Nov 2005 02:18:51 -0700
  • RE: ibc adoption Fri, 18 Nov 2005 12:18:39 -0700
  • Re: At-a-Distance task monitoring Fri, 18 Nov 2005 18:32:23 -0700
  • RE: Staggered Truss - Seismic Tue, 22 Nov 2005 14:42:16 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 17:35:00 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 19:16:50 -0700
  • RE: Need some info on seismic design requirement for IBC 2003 Wed, 7 Dec 2005 16:42:21 -0700
  • Re: moonlighting Tue, 13 Dec 2005 11:54:21 -0700
  • Re: Cold Weather Reinf. Masonry Wed, 14 Dec 2005 14:57:23 -0700
  • Re: CMU in water/wastewater Wed, 14 Dec 2005 15:37:40 -0700
  • RE: Pole-Type Footing in Seismic Zone 3 (1997 UBC) Wed, 14 Dec 2005 22:52:50 -0700
  • Typical SIP roof to SIP wall connection Wed, 14 Dec 2005 23:15:02 -0700
  • Re: Column design Fri, 16 Dec 2005 11:40:46 -0700
  • RE: Happy Holidays "Structural Plans" Fri, 16 Dec 2005 14:07:09 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 14:16:49 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 17:41:52 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 18:43:59 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:18:43 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:26:36 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:53:38 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 19:58:02 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 17 Dec 2005 02:45:45 -0700
  • Re: Microsoft Word format screw-up---Help! Sat, 17 Dec 2005 02:48:02 -0700
  • Re: Column design Sat, 17 Dec 2005 12:57:53 -0700
  • Re: Microsoft Word format screw-up---Help! Sun, 18 Dec 2005 01:10:32 -0700
  • Re: Macintel [was Microsoft Word format screw-up---Help!] Sun, 18 Dec 2005 12:15:52 -0700
  • Re: Macintel [was Microsoft Word format screw-up---Help!] Sun, 18 Dec 2005 14:14:35 -0700
  • Re: Column design Mon, 19 Dec 2005 17:31:10 -0700
  • Re: Column design Tue, 20 Dec 2005 21:32:11 -0700
  • RE: The 13th Ed. of AISC Manual Tue, 20 Dec 2005 21:41:50 -0700
  • RE: cantilevered member deflection limit Tue, 20 Dec 2005 21:50:37 -0700
  • RE: The 13th Ed. of AISC Manual Wed, 21 Dec 2005 07:58:37 -0700
  • Re: Sulfate Attack Wed, 28 Dec 2005 14:54:00 -0700
  • re: PCA Notes & ACI 318-05 Wed, 28 Dec 2005 14:58:27 -0700
  • Re: Aggregate Spec (Re-post) Wed, 28 Dec 2005 20:29:24 -0700
  • Re: Aggregate Spec (Re-post) Thu, 29 Dec 2005 13:13:47 -0700
  • RE: AISC 13th Edition Thu, 29 Dec 2005 21:29:13 -0700
  • Re: Column Design Fri, 30 Dec 2005 07:56:57 -0700
  • Re: Wood floor beam shear connection Fri, 30 Dec 2005 08:13:57 -0700
  • RE: AISC 13th Edition Fri, 30 Dec 2005 08:45:08 -0700
  • RE: AISC Steel Spec Combine forces question Fri, 30 Dec 2005 08:45:53 -0700
  • RE: Details Fri, 30 Dec 2005 22:43:02 -0700

• Scott, William N.
  • RE: MathCad Tue, 4 Oct 2005 08:52:20 -0600
  • RE: LA Times Article - Vulnerable Concrete Buildings Wed, 12 Oct 2005 12:40:13 -0600
  • RE: Civil Engineering T-shirt available Wed, 12 Oct 2005 13:00:38 -0600
  • RE: 1 Hr Firewall UBC or HUD Thu, 13 Oct 2005 09:14:21 -0600
  • RE: common rebar grade Fri, 14 Oct 2005 09:02:04 -0600
  • RE: Forces due to Frost Effects Mon, 17 Oct 2005 10:29:34 -0600
  • RE: Tree live load Mon, 17 Oct 2005 10:30:58 -0600
  • RE: Forces due to Frost Effects Mon, 17 Oct 2005 11:10:20 -0600
  • RE: Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 12:47:52 -0600
  • RE: reporting an architect Mon, 7 Nov 2005 09:43:48 -0700
  • RE: reporting an architect Mon, 7 Nov 2005 11:08:36 -0700
  • RE: Your Opinion? Thu, 10 Nov 2005 16:52:25 -0700
  • RE: Possible Louisiana Code Provision Wed, 16 Nov 2005 09:20:45 -0700
  • RE: crack monitor entertainment Thu, 1 Dec 2005 16:03:09 -0700
  • RE: crack monitor entertainment Thu, 1 Dec 2005 16:22:51 -0700
  • RE: Fwd: Doug Copp - Mr. Karasik's client Fri, 2 Dec 2005 17:53:32 -0700
  • RE: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 10:30:07 -0700
  • RE: AISC 13th Edition Thu, 29 Dec 2005 16:10:34 -0700
  • RE: AISC 13th Edition Fri, 30 Dec 2005 10:42:17 -0700

• sea
  • WTCA site revised Tue, 4 Oct 2005 13:03:48 -0600
  • Re: OT - Business credit card Tue, 27 Dec 2005 08:04:07 -0700

• Seaint Administrator
  • MODERATOR WARNING: Please Stop Doug Copp thread Fri, 2 Dec 2005 19:48:00 -0700

• Sharon
  • RE: LIGHT GAUGE/COLD FORMED SECTIONS Wed, 26 Oct 2005 13:49:41 -0600
  • RE: Seismic Design Wed, 30 Nov 2005 15:17:18 -0700
  • RE: Seasons Greetings Thu, 22 Dec 2005 11:24:27 -0700
  • RE: Old Earthquake Book for whom? Wed, 28 Dec 2005 18:32:31 -0700

• Sherman, William
  • RE: relation b/w peal ground acceleration and Seismic Zones Mon, 10 Oct 2005 07:25:52 -0600
  • RE: Welding to Old Steel Mon, 17 Oct 2005 20:56:32 -0600
  • RE: Sign post embedded in concrete footing Wed, 19 Oct 2005 12:42:50 -0600
  • RE: Control Joints in a Mat Foundation Fri, 28 Oct 2005 07:32:44 -0600
  • RE: California contract law Tue, 1 Nov 2005 16:53:52 -0700
  • RE: ICC Seismic Design 3.01 Thu, 3 Nov 2005 16:36:46 -0700
  • RE: journalist query - factors of safety Fri, 4 Nov 2005 13:39:08 -0700
  • RE: journalist query - factors of safety Fri, 4 Nov 2005 15:47:58 -0700
  • RE: ibc adoption Wed, 16 Nov 2005 09:51:52 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 08:01:45 -0700
  • RE: interesting article in today's LA Times Mon, 5 Dec 2005 08:03:57 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 19:47:16 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Wed, 7 Dec 2005 20:31:53 -0700
  • CMU in water/wastewater Wed, 14 Dec 2005 11:49:01 -0700
  • RE: dynamic foundations Tue, 20 Dec 2005 14:08:34 -0700
  • RE: Hooked anchor bolts Tue, 20 Dec 2005 16:44:07 -0700
  • RE: SI Metric Thu, 22 Dec 2005 07:45:19 -0700
  • RE: dynamic foundations Tue, 27 Dec 2005 07:45:13 -0700
  • RE: 2005 AISC Seismic Provisions Thu, 29 Dec 2005 11:16:35 -0700

• SIMON BATCHELOR
  • Re: basement sealant (Scott Haan) Thu, 17 Nov 2005 14:52:43 -0700
  • Re: redwood gazebo Mon, 5 Dec 2005 13:01:09 -0700

• sscholl2(--nospam--at)juno.com
  • RE: EX-CITY "ENGINEER" SUED IN FLOODING Thu, 27 Oct 2005 11:12:34 -0600

• Stanley E Scholl
  • Re: reporting an architect-best response Mon, 7 Nov 2005 11:34:12 -0700
  • Registered Interior Designers Thu, 17 Nov 2005 23:28:41 -0700
  • Demo Gehry buildings Tue, 29 Nov 2005 10:03:47 -0700
  • Re: Wood Roof Truss Issues Mon, 5 Dec 2005 23:58:11 -0700

• Steve Widmayer
  • RE: Registered Interior Designers Fri, 18 Nov 2005 12:42:15 -0700

• Structural Engineer
  • re: Pile Modelling in CSI SAFE Mon, 10 Oct 2005 16:30:10 -0600
  • Re: Pile Modelling in CSI SAFE Sat, 15 Oct 2005 10:48:06 -0600
  • re: RC Design Basic Program Listing by E. Nawy Mon, 17 Oct 2005 21:47:17 -0600
  • ETABS Tue, 25 Oct 2005 13:24:34 -0600
  • re: PCA Notes & ACI 318-05 Wed, 28 Dec 2005 12:18:56 -0700
  • Re: PCA Notes & ACI 318-05 Thu, 29 Dec 2005 01:13:32 -0700

• Structures Online
  • Re: Pile Modelling in CSI SAFE Tue, 11 Oct 2005 01:50:58 -0600

• Stuart, Matthew
  • Flood Resistant Design and Construction, SEI/ASCE 24-98 Thu, 13 Oct 2005 10:49:15 -0600
  • RE: Floor Finish - Garbage Transfer Facility Wed, 19 Oct 2005 17:24:17 -0600
  • RE: Floor Finish - Garbage Transfer Facility Thu, 20 Oct 2005 06:34:03 -0600
  • RE: Special Inspection Form Wed, 2 Nov 2005 07:35:08 -0700
  • NCEES Obtains Copyright Infringement Judgment against Examinee Fri, 4 Nov 2005 11:40:22 -0700
  • RE: Supporting Brick Above Low Roof Fri, 18 Nov 2005 13:06:48 -0700
  • RE: Professional Development Hours from SEAINT Forum ? Thu, 1 Dec 2005 08:52:12 -0700
  • RE: Doug Copp Fri, 2 Dec 2005 11:11:18 -0700
  • RE: MODERATOR WARNING: Please Stop Doug Copp thread Fri, 2 Dec 2005 20:00:18 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 06:56:20 -0700
  • RE: Corrosion in reinforcing steel in slabs Mon, 5 Dec 2005 08:28:45 -0700
  • RE: interesting article in today's LA Times Tue, 6 Dec 2005 06:15:34 -0700
  • RE: Architect cheating on structural calculations - where's the building depa... Thu, 8 Dec 2005 08:10:48 -0700
  • RE: Way Off Topic: Holiday Humor Fri, 9 Dec 2005 08:57:05 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 12:20:17 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 14:42:09 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 15:43:22 -0700
  • RE: Giants, Frogs, et al Fri, 9 Dec 2005 17:02:38 -0700
  • RE: Informal Poll Thu, 15 Dec 2005 13:50:21 -0700

• Suresh Acharya
  • Re: reporting an architect - to safeguard LIFE or LIMB, HEALTH, PROTERTY and PUBLIC WELFARE..." Mon, 7 Nov 2005 11:51:28 -0700
  • Re: Vertical Sleeve in an Exterior Footing Mon, 7 Nov 2005 15:00:05 -0700
  • Re: Signing & Sealing Drawings Thu, 10 Nov 2005 16:32:04 -0700
  • Re: interesting article in today's LA Times Fri, 2 Dec 2005 12:15:46 -0700
  • Re: Architect cheating on structural calculations - where's the building depa... Mon, 5 Dec 2005 11:38:40 -0700
  • Re: Wood Roof Truss Issues _ DRAG TRUSSES Tue, 6 Dec 2005 17:27:45 -0700
  • Re: Column design Thu, 15 Dec 2005 18:49:59 -0700
  • Re: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 10:47:47 -0700
  • Re: Column design Tue, 20 Dec 2005 18:05:50 -0700

• Syed Faiz
  • relation b/w peal ground acceleration and Seismic Zones Sun, 9 Oct 2005 04:50:51 -0600
  • RE: relation b/w peal ground acceleration and Seismic Zones Sun, 16 Oct 2005 00:58:32 -0600
  • RE: relation b/w peal ground acceleration and Seismic Zones Mon, 17 Oct 2005 00:49:37 -0600

• Szuchuan Chang
  • PCA Column by pacstrructurepoint / any other alternatives Sun, 30 Oct 2005 17:56:02 -0700
  • Shear corresponding to the development of the "nominal flexure strength" SEISMIC Manual V1 Wed, 9 Nov 2005 21:25:12 -0700
  • Re: Shear corresponding to the development of the "nominal flexure strength" SEISMIC Manual V1 Wed, 9 Nov 2005 21:27:30 -0700
  • Chart Excel For Engineering Usage Sun, 13 Nov 2005 21:25:59 -0700
  • Re: Chart Excel For Engineering Usage Mon, 14 Nov 2005 19:26:04 -0700
  • Re: STAAD surface elements Wed, 14 Dec 2005 21:39:36 -0700
  • The 13th Ed. of AISC Manual Sat, 17 Dec 2005 16:27:30 -0700
  • Re: The 13th Ed. of AISC Manual Sun, 18 Dec 2005 19:41:46 -0700
  • Re: The 13th Ed. of AISC Manual Sun, 18 Dec 2005 20:14:45 -0700
  • Re: New AISC Specs Wed, 21 Dec 2005 13:56:56 -0700

• Tahir Nasir
  • RE: seaint Digest for 4 Oct 2005 Wed, 5 Oct 2005 07:05:22 -0600

• Tarek Mokhtar
  • Re: Control Joints in a Mat Foundation Thu, 27 Oct 2005 15:21:46 -0600
  • Re: Wood Roof Truss Issues Mon, 5 Dec 2005 12:24:44 -0700

• Thomas Long
  • RE: Seismic Design of Pedestrian Bridges Wed, 23 Nov 2005 14:32:58 -0700
  • RE: Fw: crack monitor entertainment Fri, 2 Dec 2005 14:19:02 -0700

• Thor Matteson
  • Fastener Corrosion in salt-water soaked wood Sat, 1 Oct 2005 19:42:30 -0600

• THunt
  • Re: Seismic Moment Connection into Column Web Mon, 10 Oct 2005 13:51:22 -0600

• Tim Rudolph, PE
  • upside down base plate Thu, 3 Nov 2005 09:35:26 -0700
  • Re: upside down base  plate Thu, 3 Nov 2005 10:13:59 -0700
  • Subject: Re: redwood gazebo Tue, 6 Dec 2005 19:57:48 -0700
  • Re: Pipe Protection Below Mat Foundations Thu, 22 Dec 2005 10:02:51 -0700

• Tom . Hunt
  • Re: Steel Base Plate Grout Tue, 8 Nov 2005 13:07:34 -0700
  • Re: OT: Seasons Greetings Fri, 23 Dec 2005 07:56:00 -0700
  • RE: dynamic foundations Tue, 27 Dec 2005 08:11:33 -0700
  • re: PCA Notes & ACI 318-05 Wed, 28 Dec 2005 12:34:27 -0700
  • Re: Sulfate Attack Wed, 28 Dec 2005 13:08:54 -0700
  • Re: Sulfate Attack Wed, 28 Dec 2005 13:13:27 -0700
  • Re: Concrete Density Wed, 28 Dec 2005 14:21:09 -0700
  • Re: Retaining Wall Surcharge Formula Wed, 28 Dec 2005 16:38:57 -0700
  • RE: Column Design Thu, 29 Dec 2005 08:07:33 -0700
  • Re: Aggregate Spec (Re-post) Thu, 29 Dec 2005 08:08:06 -0700
  • RE: Old Glu-Lam Combinations Thu, 29 Dec 2005 11:04:19 -0700

• Tom Morrissey
  • Re: seaint Digest for 3 Dec 2005 (out of the office) Sun, 4 Dec 2005 01:07:41 -0700

• Tom Skaggs
  • RE: 2x T&G decking Wed, 5 Oct 2005 15:35:03 -0600
  • RE: Continuous Ridge Vents Wed, 9 Nov 2005 13:55:33 -0700
  • RE: Plywood shearwall over plywood Wed, 9 Nov 2005 16:40:20 -0700
  • RE: Plywood shearwall over plywood Wed, 9 Nov 2005 16:57:57 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Wed, 9 Nov 2005 17:07:40 -0700
  • RE: Perforated shear walls - IBC 2305.3.7.2 Thu, 10 Nov 2005 08:20:43 -0700
  • RE: Plywood shearwall over plywood Thu, 10 Nov 2005 08:35:16 -0700
  • RE: Plywood shearwall over plywood Thu, 10 Nov 2005 09:06:13 -0700
  • RE: Plywood shearwall over plywood Thu, 10 Nov 2005 09:30:50 -0700
  • RE: Plywood shearwall over plywood Thu, 10 Nov 2005 10:08:35 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 08:55:21 -0700
  • RE: Microsoft Word format screw-up---Help! Fri, 16 Dec 2005 10:36:31 -0700
  • FW: Old Glu-Lam Combinations Thu, 29 Dec 2005 12:05:26 -0700

• Tripp Howard
  • Re: USGS site and Google Maps Sat, 8 Oct 2005 13:06:12 -0600
  • Re: Importance Re: Seismic Deflection Criteria for "Penthouses" Wed, 26 Oct 2005 12:21:32 -0600

• utej
  • Re: how thick steel angle ok for self tapping screws? Mon, 19 Dec 2005 11:01:48 -0700

• Walter DeVore
  • big box $/sf Thu, 1 Dec 2005 11:13:57 -0700

• Walter Sawruk
  • Re: Dynamic analysis of Table top foundation Wed, 12 Oct 2005 12:20:53 -0600

• Wesley Werner
  • RE: Precast Site Walls Wed, 26 Oct 2005 07:48:32 -0600
  • RE: Your Opinion? Fri, 11 Nov 2005 10:21:14 -0700
  • RE: Hooked anchor bolts Tue, 20 Dec 2005 16:48:08 -0700

• Will Haynes
  • Re: PEMB - Tie Beam Thu, 6 Oct 2005 12:50:36 -0600
  • Terrace Paver Support Fri, 28 Oct 2005 17:56:58 -0600
  • RE: Terrace Paver Support Fri, 28 Oct 2005 20:46:29 -0600
  • RE: Supporting Brick Above Low Roof Mon, 21 Nov 2005 11:25:32 -0700
  • IBC2000 Seismic System Height Limits Tue, 29 Nov 2005 16:02:20 -0700
  • RE: IBC2000 Seismic System Height Limits Wed, 30 Nov 2005 06:02:44 -0700
  • Hooked anchor bolts Tue, 20 Dec 2005 09:55:04 -0700

• Willcox, Chris
  • RE: seaint Digest for 2 Nov 2005 (Re: California contract law) Thu, 3 Nov 2005 09:09:27 -0700

• Wong, Waider
  • RE: Light truck against concrete barrier Wed, 16 Nov 2005 07:29:22 -0700

• Wontae Kim
  • AASHTO vs. Deep Beam Tue, 11 Oct 2005 09:53:28 -0600
  • Subdiaphragm in Concrete Structure Thu, 10 Nov 2005 07:13:01 -0700

• Yang, Frank
  • FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 09:54:42 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 11:17:00 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 17:04:15 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation... Fri, 2 Dec 2005 18:42:17 -0700
  • RE: FW: Perlite or Other The Lightweight Concrete Insulation - Cryogenic Rebar Wed, 7 Dec 2005 14:50:49 -0700
  • RE: Nitronic 33 rebar Wed, 7 Dec 2005 15:44:56 -0700

• Yi Yang
  • RE: Dongles Tue, 4 Oct 2005 11:34:28 -0600
  • RE: Prison Break Wed, 5 Oct 2005 16:02:07 -0600
  • Contract Requirement in California Tue, 25 Oct 2005 12:16:04 -0600
  • FW: Contract Requirement in California Tue, 25 Oct 2005 12:44:09 -0600
  • RE: Contract Requirement in California Tue, 25 Oct 2005 13:22:56 -0600
  • RE: Contract Requirement in California Wed, 26 Oct 2005 10:40:12 -0600
  • California contract law Tue, 1 Nov 2005 12:09:29 -0700
  • RE: California contract law Tue, 1 Nov 2005 13:21:08 -0700
  • RE: California contract law Tue, 1 Nov 2005 15:26:23 -0700
  • RE: California contract law Wed, 2 Nov 2005 15:40:05 -0700
  • RE: Exam de-briefing Thu, 3 Nov 2005 10:22:48 -0700
  • RE: 2005 AISC Seismic Provisions Thu, 8 Dec 2005 10:26:25 -0700

---

Mail converted by MHonArc