Return to index: [Subject] [Thread] [Date] [Author]
2005 Aluminum Design Manual
[Subject Prev][Subject Next][Thread Prev][Thread Next]- To: <seaint(--nospam--at)seaint.org>
- Subject: 2005 Aluminum Design Manual
- From: "Bill Allen" <t.w.allen(--nospam--at)cox.net>
- Date: Tue, 24 Feb 2009 15:00:20 -0800
|
That sucker is $300!
=8^O
In the AISI specifications and design manual, there is a reduction in effective width for compression elements. In bending, since some of the section is in tension, more section is available when computing section properties than if the entire section were under compression such as a pure column.
Are there similar requirements in the ADM? If so, can someone point me to the proper specification section?
Thank you,
T. William (Bill) Allen, S.E. Consulting Structural Engineers
|
- Follow-Ups:
- Re: 2005 Aluminum Design Manual
- From: Gary L. Hodgson and Assoc.
- Re: 2005 Aluminum Design Manual
- Prev by Subject: Re: 11 x 17 Printers
- Next by Subject: Re: 2005 Aluminum Design Manual
- Previous by thread: Re: Structural Steel Price
- Next by thread: Re: 2005 Aluminum Design Manual
- About this archive
- Messages sorted by: [Subject][Thread][Author][Date]