SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2012
Jan-Dec

 

2011
Jan-Dec

 

2010
Jan-Dec

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2008 (Oct-Dec)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 814

• Ángel Gómez (megared)
  • Welds for a 4 plates column (Flexure section ) Wed, 1 Oct 2008 12:29:48 -0600

• Alfred Müller
  • merry christmas Wed, 24 Dec 2008 09:31:12 -0700

• cairo briceño
  • Progressive collapse Fri, 21 Nov 2008 17:16:18 -0700
  • Progressive collapse Tue, 25 Nov 2008 09:02:35 -0700

• Ing. Benjamín Arcos Reyes
  • fall protection systems Mon, 3 Nov 2008 15:13:48 -0700

• Abolhassan Astaneh-Asl
  • ASCE investigation of Katrina and WTC-Assoc. Press Story Wed, 22 Oct 2008 12:55:20 -0600
  • OSHPD SCBF's using HSS Braces Thu, 16 Oct 2008 10:47:12 -0600
  • RE: Progressive collapse Mon, 24 Nov 2008 12:32:26 -0700

• Acharya, Suresh
  • RE: Happy Holidays Wed, 24 Dec 2008 14:07:45 -0700
  • RE: Flush Moment end plate connections -- -> DESIGN GUIDE 4 Mon, 17 Nov 2008 14:03:33 -0700
  • RE: STRESS AND FORCE Fri, 14 Nov 2008 11:46:23 -0700
  • RE: STRESS AND FORCE Fri, 14 Nov 2008 18:39:13 -0700

• Adair, Joel
  • RE: Fuse type fasteners Tue, 21 Oct 2008 11:20:20 -0600

• Adam Vakiener
  • Re: seaint Digest for 2 Nov 2008 Mon, 3 Nov 2008 06:53:00 -0700
  • RE: Steel Deck Cantilevers Mon, 6 Oct 2008 06:01:01 -0600

• Alexander Bausk
  • Re: Expansion Joint in Building Thu, 20 Nov 2008 00:15:37 -0700
  • Re: Wall framing with I-Joists Tue, 7 Oct 2008 14:34:45 -0600
  • Re: Seismic code for Iraq Fri, 21 Nov 2008 16:14:05 -0700

• Andre Sidler
  • ACI 318-08 Section 14.8 Alternate Design of Slender Walls Tue, 28 Oct 2008 16:54:57 -0600

• Andrew Kester, P.E.
  • re: 12" frame walls Wed, 8 Oct 2008 11:29:10 -0600
  • re: doubler plates Wed, 19 Nov 2008 09:54:46 -0700
  • component and cladding vs MWFRS Tue, 30 Dec 2008 11:04:55 -0700
  • re: C & C vs MWFRS Wed, 31 Dec 2008 12:21:50 -0700
  • re: lap splices Fri, 5 Dec 2008 11:03:55 -0700
  • CMU sealing- architectural question Fri, 3 Oct 2008 14:53:09 -0600
  • re: ACI codes Fri, 3 Oct 2008 14:01:39 -0600
  • re: fire damaged slab Fri, 12 Dec 2008 11:13:50 -0700
  • re: in-ground pool design Fri, 12 Dec 2008 11:40:03 -0700

• Andrew Kester, PE
  • wind load on fences/walls Fri, 19 Dec 2008 11:43:17 -0700
  • re: shear flow Tue, 21 Oct 2008 08:22:26 -0600
  • RE: Subject When wind governs with No Seismic Mon, 27 Oct 2008 12:36:52 -0600
  • re: EOR observations Mon, 27 Oct 2008 12:53:13 -0600
  • re: steel deck Sun, 5 Oct 2008 17:57:51 -0600
  • re: hollow core details Tue, 7 Oct 2008 08:27:40 -0600

• Arun Kumar
  • happy new year Wed, 31 Dec 2008 07:23:44 -0700
  • Happy new year. Wed, 31 Dec 2008 07:25:36 -0700

• Ashraf Manjappara
  • Re: Geotech contractors Mon, 6 Oct 2008 09:07:35 -0600

• Ashwin Ranga Swamy
  • Re: Use old 2D autocad typical details when putting plans together in Revit? Tue, 25 Nov 2008 11:04:47 -0700

• ASLCSE
  • Re: Hardy Frame Moment Frame Thu, 2 Oct 2008 13:16:28 -0600
  • Re: Bad Codes Thu, 2 Oct 2008 13:28:23 -0600

• AWC Info
  • Re: More Plywood Diaphragm's Thu, 6 Nov 2008 07:48:14 -0700
  • FW: Wood SW compression check Mon, 17 Nov 2008 12:32:57 -0700

• bill
  • Citing Publications In Your Technical Writing Thu, 2 Oct 2008 14:02:33 -0600

• Bill Allen
  • RE: Flush Moment end plate connections Sun, 16 Nov 2008 11:41:34 -0700
  • RE: Wind Load on Wood Fence Fri, 19 Dec 2008 17:48:35 -0700
  • RE: Cost Effective Mechanical Lap Splice? Fri, 5 Dec 2008 11:50:08 -0700
  • RE: Flush Moment end plate connections Mon, 17 Nov 2008 07:41:02 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 09:24:02 -0700
  • Seismic Loads in Ceiling Mon, 22 Dec 2008 09:48:22 -0700
  • Limit on pour height? Mon, 17 Nov 2008 19:33:17 -0700
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:05:44 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 10:41:57 -0700
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 18:35:25 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 07:04:04 -0700
  • RE: Limit on pour height? Wed, 19 Nov 2008 10:53:48 -0700
  • RE: STRESS AND FORCE Fri, 14 Nov 2008 10:41:14 -0700
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:08:43 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 10:34:35 -0700
  • RE: stemwall cutting Thu, 2 Oct 2008 06:03:40 -0600
  • RE: Buoyancy Tue, 4 Nov 2008 09:26:13 -0700
  • RE: OSHPD SCBF's using HSS Braces Wed, 15 Oct 2008 16:46:02 -0600
  • RE: friction angle of saturated soil. Fri, 12 Dec 2008 11:26:42 -0700
  • RE: Wind forces Thu, 18 Dec 2008 16:05:51 -0700
  • RE: Bad Codes Thu, 2 Oct 2008 08:52:55 -0600
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 09:59:41 -0700
  • 2007 CBC Section 1805.7.2.1 Wed, 29 Oct 2008 17:03:32 -0600
  • Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 12:26:53 -0700
  • Buoyancy Tue, 4 Nov 2008 09:14:32 -0700
  • RE: Cost Effective Mechanical Lap Splice? Thu, 4 Dec 2008 19:24:04 -0700
  • RE: Bad Codes Thu, 9 Oct 2008 09:40:56 -0600

• Bill Cain
  • RE: Pressure treatment of wood Tue, 9 Dec 2008 21:22:31 -0700
  • RE: DYNAMICS: Machine Run-Up Wed, 10 Dec 2008 17:56:53 -0700
  • RE: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 18:08:27 -0700
  • RE: Wood testing Fri, 26 Dec 2008 11:07:50 -0700

• Bill Polhemus
  • Re: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 07:23:46 -0600
  • Re: STRESS AND FORCE Thu, 13 Nov 2008 13:49:27 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 12:02:08 -0700
  • Re: Seismic Design of Nitrogen Storage Tank Tue, 4 Nov 2008 11:05:26 -0700
  • Re: Wind Loading Reference Sun, 23 Nov 2008 14:49:41 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 11:02:42 -0700
  • Re: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 07:25:40 -0600
  • Re: 20,000 more engineers... Mon, 17 Nov 2008 17:32:24 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 12:46:16 -0700
  • DYNAMICS: Machine Run-Up Wed, 10 Dec 2008 11:55:35 -0700
  • Re: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 11:52:27 -0600
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 09:49:38 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 11:07:25 -0700
  • iCrete? Tue, 28 Oct 2008 07:27:08 -0600
  • Jurisdictions That REQUIRE Engineer's Observations Thu, 23 Oct 2008 13:48:17 -0600
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 10:01:47 -0700

• Bob Benedict ra
  • The How and Why of Arctic Char in Ireland. Thu, 23 Oct 2008 02:21:14 -0600

• Bob Freeman
  • Wall framing with I-Joists Tue, 7 Oct 2008 13:41:28 -0600

• Casey K. Hemmatyar
  • RE: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 16:08:28 -0600
  • re: Merry Christmas & Happy 2009 Wed, 24 Dec 2008 11:04:57 -0700
  • RE: OSHPD SCBF's using HSS Braces Wed, 15 Oct 2008 18:06:38 -0600
  • Re: Bad Codes Thu, 2 Oct 2008 09:55:31 -0600
  • RE: Steel Moment Frames per ASCE 7-05 Tue, 7 Oct 2008 17:23:34 -0600
  • 20,000 more engineers... Mon, 17 Nov 2008 16:43:53 -0700

• Chance, Acie
  • RE: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 16:50:26 -0700

• christopher . banbury
  • public works projects Sun, 7 Dec 2008 14:05:39 -0700

• Christopher Banbury
  • depth of footing above bottom reinforcement Wed, 29 Oct 2008 13:39:17 -0600
  • RE: depth of footing above bottom reinforcement Fri, 31 Oct 2008 09:10:42 -0600
  • RE: Cost Effective Mechanical Lap Splice? Mon, 8 Dec 2008 09:22:10 -0700

• Christopher Wright
  • Re: Bad Codes Sat, 11 Oct 2008 11:20:29 -0600
  • Off topic [was: IBC] Wed, 10 Dec 2008 09:58:50 -0700
  • Re: Happy Holidays Wed, 24 Dec 2008 14:33:04 -0700
  • Re: Bad Codes Fri, 10 Oct 2008 10:20:31 -0600
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 11:56:24 -0700
  • Re: STRESS AND FORCE Thu, 13 Nov 2008 10:48:36 -0700
  • Re: seismic forces Mon, 24 Nov 2008 22:46:19 -0700
  • Re: DYNAMICS: Machine Run-Up Wed, 10 Dec 2008 23:00:11 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 21:58:02 -0700
  • Re: Citing Publications In Your Technical Writing Thu, 2 Oct 2008 15:18:17 -0600
  • Re: seismic forces Tue, 25 Nov 2008 10:08:58 -0700
  • Re: wind load on fences/walls Fri, 19 Dec 2008 13:44:24 -0700
  • Re: Seismic Charges Wed, 1 Oct 2008 22:08:39 -0600
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 12:06:37 -0700
  • Re: Finite Element Analysis Mon, 27 Oct 2008 22:41:39 -0600

• Conrad Harrison
  • RE: Flush Moment end plate connections Mon, 17 Nov 2008 18:57:26 -0700
  • RE: ASCE 7-05 and IBC 06 Mon, 22 Dec 2008 18:18:00 -0700
  • RE: public works projects Sun, 7 Dec 2008 19:26:22 -0700
  • RE: Wind forces Thu, 18 Dec 2008 18:17:51 -0700
  • RE: lap splices Sun, 7 Dec 2008 23:41:17 -0700
  • RE: Wind load on sloped roof with parapet Thu, 4 Dec 2008 17:10:33 -0700
  • Re: component and cladding vs MWFRS Tue, 30 Dec 2008 23:30:54 -0700
  • RE: Limit on pour height? Mon, 17 Nov 2008 19:39:30 -0700
  • RE: Prestressing documents related to Cable Stayed Bridge Project Mon, 8 Dec 2008 21:11:26 -0700
  • Overview ASCE7-05 and IBC:2003 Wind loading. Sun, 21 Dec 2008 19:11:20 -0700
  • RE: Sg rods at purlins Thu, 13 Nov 2008 17:46:59 -0700
  • RE: Cost Effective Mechanical Lap Splice? Thu, 4 Dec 2008 22:18:16 -0700
  • RE: Collision Load for Highway Bridges Tue, 18 Nov 2008 17:39:40 -0700
  • RE: Flush Moment end plate connections Sun, 16 Nov 2008 23:36:18 -0700
  • RE: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 17:16:26 -0700
  • RE: Alloy for high temperature application Tue, 16 Dec 2008 18:12:04 -0700
  • RE: Cost Effective Mechanical Lap Splice? Thu, 4 Dec 2008 19:43:01 -0700
  • RE: ASCE wind on parapets Mon, 8 Dec 2008 18:12:03 -0700
  • Re: Wind Load Topographic Effects Tue, 30 Dec 2008 22:35:18 -0700
  • RE: Wind Load on Wood Fence Wed, 17 Dec 2008 19:25:47 -0700
  • RE: Wind force -- codes, building design, officials, etc. Sun, 21 Dec 2008 20:36:48 -0700
  • RE: RE: Prestressing documents related to Cable Stayed Bridge Project Tue, 9 Dec 2008 20:55:58 -0700
  • RE: STRESS AND FORCE Thu, 13 Nov 2008 20:08:33 -0700
  • RE: Square notch on wf beams Wed, 17 Dec 2008 18:33:22 -0700
  • RE: Wind load on sloped roof with parapet Thu, 4 Dec 2008 19:26:48 -0700
  • RE: Wind load on sloped roof with parapet Sun, 30 Nov 2008 23:16:09 -0700
  • RE: STRESS AND FORCE Sun, 16 Nov 2008 17:17:19 -0700
  • RE: Wind Load on Wood Fence Wed, 17 Dec 2008 18:55:28 -0700
  • RE: wind load on fences/walls Sun, 21 Dec 2008 23:49:05 -0700
  • RE: Wind Load on Wood Fence Wed, 17 Dec 2008 19:44:15 -0700
  • RE: Progressive collapse Sun, 23 Nov 2008 17:50:52 -0700
  • RE: STRESS AND FORCE Sun, 16 Nov 2008 22:41:11 -0700
  • RE: Can anybody answer this? Wed, 5 Nov 2008 22:56:05 -0700
  • RE: Alloy for high temperature application Tue, 16 Dec 2008 20:47:45 -0700

• Craig Hawe
  • Residential garage floor live load Mon, 3 Nov 2008 07:20:46 -0700

• DA ENGINEERING
  • foundation and slab for houses affected by fire Thu, 11 Dec 2008 10:17:11 -0700

• Daniel Coloski
  • RE: Progressive collapse Tue, 25 Nov 2008 14:49:51 -0700

• Daniel Popp
  • Re: Bad Codes Thu, 2 Oct 2008 11:25:19 -0600
  • PT Beam Horizontal Construction Joint Thu, 11 Dec 2008 11:51:33 -0700

• Daryl Richardson
  • Re: Residential garage floor live load Mon, 3 Nov 2008 10:16:04 -0700
  • Best Wishes Wed, 24 Dec 2008 10:28:37 -0700
  • Re: Advertizing one's absence Wed, 1 Oct 2008 09:43:25 -0600
  • Re: Bad Codes Thu, 2 Oct 2008 11:07:09 -0600
  • Re: Seismic Charges Thu, 2 Oct 2008 10:32:33 -0600
  • Re: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:15:03 -0700
  • Re: Packing peanuts? Wed, 29 Oct 2008 15:54:31 -0600
  • Re: Cost Effective Mechanical Lap Splice? Fri, 5 Dec 2008 09:43:10 -0700
  • Re: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:06:20 -0700
  • Re: Bad Codes Thu, 2 Oct 2008 10:14:32 -0600

• Dave Adams
  • RE: Hardy Frame Moment Frame Thu, 2 Oct 2008 14:07:08 -0600
  • RE: Bad Codes Fri, 10 Oct 2008 08:04:22 -0600
  • RE: When wind governs with No Seismic Mon, 27 Oct 2008 09:28:03 -0600
  • RE: Bad Codes Thu, 2 Oct 2008 11:35:19 -0600

• dave brown
  • Fuse type fasteners Tue, 21 Oct 2008 09:40:52 -0600

• David Fisher
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 13:32:41 -0700
  • RE: depth of footing above bottom reinforcement Wed, 29 Oct 2008 13:57:49 -0600
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 12:57:47 -0700
  • RE: Arkansas Wed, 3 Dec 2008 11:19:08 -0700
  • RE: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 10:18:08 -0600
  • [no subject] Wed, 24 Dec 2008 10:31:47 -0700
  • RE: Slab on grade >>> Sunday! Mon, 10 Nov 2008 10:47:29 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 10:15:56 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 09:31:32 -0700
  • JV - Opp Beverly Hills Mon, 17 Nov 2008 13:19:49 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 14:15:30 -0700
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:00:21 -0700
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:27:23 -0700
  • RE: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 15:11:25 -0700
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:38:56 -0700
  • RE: Slab on grade >>> Sunday! Mon, 10 Nov 2008 13:28:15 -0700

• David Francis Caballero
  • Finite Element Analysis Mon, 27 Oct 2008 10:19:46 -0600

• David Merrick, SE
  • Re: Residential garage floor live load Mon, 3 Nov 2008 12:40:33 -0700

• David Topete
  • Re: Seismic code for Iraq Fri, 21 Nov 2008 16:17:15 -0700
  • Re: Seismic code for Iraq Fri, 21 Nov 2008 16:26:42 -0700
  • Re: Happy Holidays Wed, 24 Dec 2008 13:28:16 -0700
  • Re: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 14:11:48 -0600
  • Re: Bad Codes Thu, 2 Oct 2008 14:49:26 -0600
  • Re: Roof height for A-Frame Tue, 11 Nov 2008 12:17:44 -0700
  • Re: Slab on grade >>> Sunday! Mon, 10 Nov 2008 11:36:22 -0700
  • Re: When wind governs with No Seismic Mon, 27 Oct 2008 09:15:05 -0600
  • Re: Radiant Floor System on Plywood Subfloor Mon, 22 Dec 2008 14:32:45 -0700
  • Re: More Plywood Diaphragm ?'s Wed, 5 Nov 2008 16:40:20 -0700
  • Re: Twisting of rebar Thu, 6 Nov 2008 11:11:07 -0700
  • Re: Seismic code for Iraq Fri, 21 Nov 2008 16:15:30 -0700
  • Re: K distance encroachment Tue, 18 Nov 2008 13:44:20 -0700
  • Re: Pressure treatment of wood Mon, 8 Dec 2008 12:58:54 -0700
  • Re: Wind Load on Wood Fence Thu, 18 Dec 2008 12:06:36 -0700
  • Re: Tue, 7 Oct 2008 16:51:38 -0600
  • Re: Wind Load on Wood Fence Thu, 18 Dec 2008 12:20:36 -0700
  • Re: R values for vertical combinations exceptions Thu, 2 Oct 2008 10:20:51 -0600
  • Re: RE: Full Pen Weld at Channel Wed, 15 Oct 2008 09:49:42 -0600
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 11:46:20 -0700
  • Re: Water Bag Load Testing Mon, 17 Nov 2008 10:36:32 -0700
  • Re: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 11:59:56 -0700
  • Re: Green Roof Live Loads Wed, 5 Nov 2008 09:28:34 -0700
  • Roof height for A-Frame Mon, 10 Nov 2008 18:59:13 -0700
  • Re: Reindeer live load Fri, 26 Dec 2008 17:24:52 -0700
  • Re: seismic forces Mon, 24 Nov 2008 14:43:22 -0700
  • Re: Seismic code for Iraq Mon, 24 Nov 2008 10:29:57 -0700

• David Watt
  • Upward load on slabs per UFC 4-023-03 Thu, 20 Nov 2008 12:42:04 -0700

• Davis Parsons
  • RE: Jurisdictions That REQUIRE Engineer's Observations Wed, 29 Oct 2008 12:09:38 -0600

• Deviationz
  • RE: Seismic code for Iraq Sat, 22 Nov 2008 05:54:37 -0700

• Dickey, David
  • Deletion of ASTM F1642 Airblast Testing from USGS Specs Thu, 4 Dec 2008 08:17:19 -0700
  • Twisting of rebar Thu, 6 Nov 2008 08:25:59 -0700

• Donald Bruckman
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:54:29 -0700
  • RE: More Plywood Diaphragm's Thu, 6 Nov 2008 10:18:18 -0700

• Donny Harris
  • RE: Soldier Beam Retaining Wall Design Practice Tue, 11 Nov 2008 12:23:44 -0700
  • RE: ASCE 7-05 and IBC 06 Tue, 23 Dec 2008 13:14:03 -0700
  • Re: OSHPD SCBF's using HSS Braces Thu, 16 Oct 2008 11:43:40 -0600

• Doug Mayer
  • RE: Diaphragm Continuity at Continuous Ridge Vents Mon, 27 Oct 2008 10:57:22 -0600
  • RE: Horizontal Irregularities Mon, 3 Nov 2008 11:54:05 -0700
  • RE: 1.2 stress increase Mon, 17 Nov 2008 15:22:26 -0700
  • RE: Upward load on slabs per UFC 4-023-03 Thu, 20 Nov 2008 13:10:06 -0700
  • More Plywood Diaphragm ?'s Wed, 5 Nov 2008 15:33:03 -0700
  • RE: ACI codes Fri, 3 Oct 2008 14:05:02 -0600
  • RE: Horizontal Irregularities Mon, 3 Nov 2008 13:20:08 -0700
  • RE: Horizontal Irregularities Mon, 3 Nov 2008 14:58:43 -0700
  • RE: Horizontal Irregularities Mon, 3 Nov 2008 14:51:15 -0700
  • Horizontal Irregularities Mon, 3 Nov 2008 11:26:44 -0700
  • RE: Horizontal Irregularities Mon, 3 Nov 2008 14:52:18 -0700
  • RE: Old Steel Sections Thu, 11 Dec 2008 14:59:16 -0700
  • RE: 1.2 stress increase Mon, 17 Nov 2008 13:10:37 -0700
  • RE: More Plywood Diaphragm's Thu, 6 Nov 2008 09:41:20 -0700

• Drew Morris
  • HH Robertson deck Wed, 5 Nov 2008 13:29:16 -0700
  • Sg rods at purlins Thu, 13 Nov 2008 17:12:27 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 14:08:26 -0700
  • Re: Happy Holidays Wed, 24 Dec 2008 14:01:59 -0700
  • Re: Residential garage floor live load >>> Code Mon, 3 Nov 2008 10:27:05 -0700
  • HH Robertson deck Wed, 5 Nov 2008 13:16:41 -0700

• ECVAl3
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 14:30:57 -0700
  • Re: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 17:37:14 -0700

• Edmond San Jose
  • Re: Use old 2D autocad typical details when putting plans together in Revit? Thu, 27 Nov 2008 02:20:09 -0700

• edmondo san jose
  • Re: Moment Resisting Frame Tue, 9 Dec 2008 01:46:58 -0700
  • Moment Resisting Frame Thu, 4 Dec 2008 20:40:49 -0700
  • Expansion Joint in Building Wed, 19 Nov 2008 19:34:00 -0700
  • Re: Moment Resisting Frame Fri, 5 Dec 2008 21:41:27 -0700

• Ehrlich, Gary
  • RE: HUD guidelines for stick built homes? Fri, 12 Dec 2008 11:51:59 -0700
  • RE: IBC v IRC Fri, 19 Dec 2008 11:29:10 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 07:25:04 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 07:36:24 -0700
  • RE: Roof height for A-Frame Tue, 11 Nov 2008 09:06:27 -0700
  • RE: fall protection systems Tue, 4 Nov 2008 09:05:36 -0700
  • RE: seismic forces Tue, 25 Nov 2008 11:02:49 -0700
  • RE: Wind forces Fri, 19 Dec 2008 11:33:19 -0700
  • RE: seismic forces Tue, 25 Nov 2008 07:06:00 -0700

• Eric Tompos
  • Concrete design Tue, 16 Dec 2008 07:16:00 -0700

• erik_g
  • Reindeer live load Wed, 24 Dec 2008 20:28:14 -0700
  • Southern Calif residential Engineers Sat, 18 Oct 2008 18:27:56 -0600
  • RE: Rammed earth construction Tue, 4 Nov 2008 10:25:21 -0700
  • Pressure treatment of wood Mon, 8 Dec 2008 11:47:08 -0700
  • RE: Residential garage floor live load Sun, 2 Nov 2008 13:28:40 -0700

• Farzin Rahbar
  • RE: Twisting of rebar Fri, 7 Nov 2008 09:46:19 -0700

• FSRahbar
  • Re: 2007 CBC Section 1805.7.2.1 Wed, 29 Oct 2008 17:26:11 -0600
  • Re: varying shear flow in concrete beam. Mon, 20 Oct 2008 15:53:26 -0600
  • Re: Packing peanuts? Wed, 29 Oct 2008 15:36:44 -0600

• G Vishwanath
  • Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 03:46:34 -0700
  • Advertizing one's absence Wed, 1 Oct 2008 04:39:23 -0600

• Gaines, David
  • RE: Cost Effective Mechanical Lap Splice? Thu, 4 Dec 2008 20:07:54 -0700
  • RE: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 12:58:56 -0700
  • RE: foundation and slab for houses affected by fire Thu, 11 Dec 2008 12:57:58 -0700
  • RE: foundation and slab for houses affected by fire Fri, 12 Dec 2008 10:33:51 -0700

• Garner, Robert
  • RE: IBC Wed, 10 Dec 2008 08:32:04 -0700
  • RE: STRESS AND FORCE Thu, 13 Nov 2008 12:26:18 -0700
  • RE: Full Pen Weld at Channel Tue, 14 Oct 2008 07:52:34 -0600
  • RE: Packing peanuts? Wed, 29 Oct 2008 15:33:55 -0600
  • RE: Bad Codes Thu, 9 Oct 2008 09:00:25 -0600
  • RE: Collision Load for Highway Bridges Wed, 19 Nov 2008 09:02:18 -0700
  • RE: Steel Moment Frames per ASCE 7-05 Wed, 8 Oct 2008 11:33:03 -0600
  • RE: Advertizing one's absence Wed, 1 Oct 2008 07:53:35 -0600
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 16:37:04 -0700
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 09:53:57 -0700
  • RE: Water Bag Load Testing Mon, 17 Nov 2008 10:13:48 -0700
  • RE: 20,000 more engineers... Mon, 17 Nov 2008 17:09:40 -0700
  • RE: Bad Codes Thu, 2 Oct 2008 12:30:21 -0600
  • RE: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 11:25:10 -0700
  • RE: Code load combinations Mon, 6 Oct 2008 08:39:47 -0600
  • RE: Wall framing with I-Joists Tue, 7 Oct 2008 13:33:15 -0600
  • RE: Limit on Pour Height Wed, 19 Nov 2008 11:31:14 -0700
  • RE: Bad Codes Fri, 10 Oct 2008 08:13:17 -0600
  • RE: RE: Full Pen Weld at Channel Wed, 15 Oct 2008 08:42:06 -0600
  • RE: Code load combinations Mon, 6 Oct 2008 16:27:56 -0600
  • RE: Bad Codes Fri, 10 Oct 2008 12:46:54 -0600
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 08:09:19 -0700
  • RE: Seismic Charges Thu, 2 Oct 2008 10:51:09 -0600
  • Bad Codes Thu, 2 Oct 2008 08:37:41 -0600
  • RE: Seismic Charges Thu, 2 Oct 2008 08:07:40 -0600
  • RE: Underground tank Mon, 17 Nov 2008 08:06:08 -0700

• Gary L. Hodgson and Assoc.
  • IBC Wed, 10 Dec 2008 07:16:04 -0700
  • Re: Square notch on wf beams Thu, 18 Dec 2008 05:45:30 -0700
  • Re: Bad Codes Fri, 3 Oct 2008 05:42:06 -0600
  • Re: Underground tank Mon, 17 Nov 2008 05:47:21 -0700
  • Code load combinations Mon, 6 Oct 2008 05:41:08 -0600
  • Re: Twisting of rebar Fri, 7 Nov 2008 05:36:16 -0700
  • Re: Bad Codes Sat, 11 Oct 2008 06:40:47 -0600
  • Arkansas Wed, 3 Dec 2008 05:14:01 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 09:36:24 -0700
  • Re: Code load combinations Mon, 6 Oct 2008 14:47:43 -0600
  • Re: Bad Codes Fri, 10 Oct 2008 06:03:04 -0600
  • Re: Flush Moment end plate connections Sat, 15 Nov 2008 06:50:32 -0700
  • Re: STRESS AND FORCE Mon, 17 Nov 2008 05:44:16 -0700
  • Re: Residential garage floor live load Tue, 4 Nov 2008 05:27:57 -0700
  • Re: public works projects Mon, 8 Dec 2008 05:43:56 -0700
  • Re: Flush Moment end plate connections Thu, 20 Nov 2008 05:48:12 -0700
  • Re: Arkansas Thu, 4 Dec 2008 05:38:15 -0700

• Gautam Manandhar
  • RE: Seismic code for Iraq Fri, 21 Nov 2008 18:06:01 -0700
  • RE: Seismic code for Iraq Fri, 21 Nov 2008 18:19:06 -0700
  • RE: Seismic code for Iraq Fri, 21 Nov 2008 16:03:24 -0700

• Gerard Madden, SE
  • Re: Limit on pour height? Tue, 18 Nov 2008 11:40:11 -0700
  • Re: OSHPD SCBF's using HSS Braces Thu, 16 Oct 2008 14:05:18 -0600
  • OSHPD SCBF's using HSS Braces Wed, 15 Oct 2008 16:36:03 -0600
  • Re: Use old 2D autocad typical details when putting plans together in Revit? Mon, 24 Nov 2008 20:25:37 -0700
  • Re: Residential garage floor live load Sun, 2 Nov 2008 12:12:02 -0700
  • Re: Structural Engineer on FRINGE Wed, 19 Nov 2008 10:08:30 -0700
  • Re: Square notch on wf beams Wed, 17 Dec 2008 18:28:21 -0700
  • Re: Slab on grade >>> Sunday! Mon, 10 Nov 2008 10:40:00 -0700
  • Re: OSHPD SCBF's using HSS Braces Thu, 16 Oct 2008 09:48:06 -0600
  • Re: Old Steel Sections Fri, 12 Dec 2008 11:14:41 -0700
  • Old Steel Sections Thu, 11 Dec 2008 13:27:27 -0700
  • Re: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:10:02 -0700
  • Re: Flush Moment end plate connections Fri, 14 Nov 2008 14:46:44 -0700
  • Re: Citing Publications In Your Technical Writing Thu, 2 Oct 2008 14:58:44 -0600
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 12:43:54 -0700

• Gordon Goodell
  • Curved GluLam tie Mon, 13 Oct 2008 10:02:39 -0600
  • RE: Diaphragm Continuity at Continuous Ridge Vents Mon, 27 Oct 2008 16:15:27 -0600
  • RE: 12" frame walls Wed, 8 Oct 2008 12:11:53 -0600
  • RE: Curved GluLam tie Tue, 14 Oct 2008 08:28:02 -0600
  • RE: Rammed earth construction Mon, 3 Nov 2008 16:05:06 -0700
  • RE: Packing peanuts? Wed, 29 Oct 2008 15:38:25 -0600
  • RE: Slab on grade Mon, 10 Nov 2008 10:36:27 -0700
  • RE: Roof height for A-Frame Wed, 12 Nov 2008 17:25:16 -0700
  • RE: seismic forces Mon, 24 Nov 2008 15:27:45 -0700
  • RE: Roof height for A-Frame Tue, 11 Nov 2008 08:57:46 -0700
  • RE: ASCE wind on parapets Mon, 8 Dec 2008 15:41:56 -0700
  • Packing peanuts? Wed, 29 Oct 2008 15:05:42 -0600

• Greene, Al [PTS]
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 10:11:05 -0700

• Haan, Scott M POA
  • Use old 2D autocad typical details when putting plans together in Revit? Mon, 24 Nov 2008 18:38:32 -0700
  • RE: Glazing Blast Loads Mon, 17 Nov 2008 11:35:26 -0700
  • RE: Support for veneer over openings Thu, 23 Oct 2008 18:18:08 -0600
  • RE: Support for veneer over openings Thu, 23 Oct 2008 17:50:41 -0600

• Harold Sprague
  • RE: Slab on grade Mon, 10 Nov 2008 08:25:05 -0700
  • RE: Wood testing Thu, 25 Dec 2008 18:21:26 -0700
  • RE: seismic forces Tue, 25 Nov 2008 09:59:01 -0700
  • RE: Progressive collapse Sun, 23 Nov 2008 18:09:38 -0700
  • RE: Slab on grade Sun, 9 Nov 2008 16:10:29 -0700
  • RE: Slab on grade Mon, 10 Nov 2008 14:02:25 -0700
  • RE: CMU sealing- architectural question Mon, 6 Oct 2008 13:52:59 -0600
  • RE: Twisting of rebar Thu, 6 Nov 2008 11:24:32 -0700
  • RE: Square notch on wf beams Fri, 19 Dec 2008 08:47:21 -0700
  • RE: Upward load on slabs per UFC 4-023-03 Thu, 20 Nov 2008 21:09:51 -0700
  • RE: Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 21:13:35 -0600
  • RE: Full Pen Weld at Channel Wed, 15 Oct 2008 17:38:39 -0600
  • RE: Wind load on sloped roof with parapet Mon, 1 Dec 2008 16:54:56 -0700
  • RE: Slab on grade Sat, 8 Nov 2008 17:42:08 -0700
  • RE: Wind load on sloped roof with parapet Mon, 1 Dec 2008 09:22:45 -0700
  • RE: Sg rods at purlins Thu, 13 Nov 2008 19:08:57 -0700
  • RE: Water Bag Load Testing Mon, 17 Nov 2008 09:58:30 -0700
  • RE: Wind forces Fri, 19 Dec 2008 08:55:10 -0700
  • RE: HH Robertson deck Wed, 5 Nov 2008 16:28:20 -0700
  • RE: fall protection systems Tue, 4 Nov 2008 21:48:53 -0700
  • RE: Slab on grade Fri, 7 Nov 2008 13:31:27 -0700
  • RE: OCBF Requirements Thu, 20 Nov 2008 20:39:49 -0700
  • RE: Glazing Blast Loads Mon, 17 Nov 2008 11:13:20 -0700
  • RE: Water Bag Load Testing Mon, 17 Nov 2008 11:26:25 -0700
  • RE: Retaining Wall Design Practice (Seismic) Tue, 11 Nov 2008 09:44:13 -0700
  • RE: Hollow Core Design Mon, 6 Oct 2008 19:00:32 -0600
  • RE: Cutting structural steel at site Sat, 1 Nov 2008 07:41:10 -0600
  • RE: Full Pen Weld at Channel Tue, 14 Oct 2008 15:13:00 -0600
  • RE: Slab on grade >>> Sunday! Mon, 10 Nov 2008 07:38:20 -0700
  • RE: Twisting of rebar Thu, 6 Nov 2008 23:39:57 -0700
  • RE: Packing peanuts? Wed, 29 Oct 2008 15:56:42 -0600
  • RE: Load combination 7. .6D+W+H Wed, 5 Nov 2008 09:27:13 -0700
  • RE: Concrete Bearing Pressure at Base Plates Thu, 20 Nov 2008 08:47:21 -0700
  • RE: Expansion Joint in Building Thu, 20 Nov 2008 08:32:46 -0700
  • RE: Retaining Wall Design Practice (Seismic) Tue, 11 Nov 2008 09:03:42 -0700
  • RE: Seismic Design of Nitrogen Storage Tank Wed, 5 Nov 2008 07:56:45 -0700
  • RE: Can anybody answer this? Fri, 7 Nov 2008 08:10:23 -0700
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 16:14:00 -0700
  • RE: seismic forces Mon, 24 Nov 2008 18:26:29 -0700
  • RE: Seismic Charges Thu, 2 Oct 2008 21:52:06 -0600
  • RE: Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 21:13:48 -0600
  • RE: When wind governs with No Seismic Mon, 27 Oct 2008 09:47:17 -0600
  • RE: Moment Resisting Frame Fri, 5 Dec 2008 07:55:25 -0700
  • RE: Jurisdictions That REQUIRE Engineer's Observations Wed, 29 Oct 2008 09:59:42 -0600
  • RE: Moment Resisting Frame Tue, 9 Dec 2008 00:05:01 -0700
  • RE: Deletion of ASTM F1642 Airblast Testing from USGS Specs Fri, 5 Dec 2008 09:00:57 -0700
  • RE: Full Pen Weld at Channel Mon, 13 Oct 2008 15:56:28 -0600
  • RE: Concrete design Mon, 15 Dec 2008 17:06:15 -0700

• HBAP
  • Wind forces Thu, 18 Dec 2008 15:08:31 -0700

• Henry Gallart
  • RE: Progressive collapse Mon, 24 Nov 2008 14:36:53 -0700

• Jason Christensen
  • IBC v IRC Fri, 19 Dec 2008 10:20:19 -0700
  • RE: ASCE wind on parapets Mon, 8 Dec 2008 16:09:18 -0700
  • Concrete design Mon, 15 Dec 2008 11:42:21 -0700
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:22:03 -0700
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:17:36 -0700
  • RE: FW: ASCE wind on parapets Tue, 9 Dec 2008 08:04:30 -0700
  • Slab on grade Fri, 7 Nov 2008 11:28:46 -0700
  • RE: IBC Wed, 10 Dec 2008 08:09:53 -0700
  • Min. and Max. weld lengths Mon, 3 Nov 2008 10:37:23 -0700
  • RE: Min. and Max. weld lengths Mon, 3 Nov 2008 11:15:50 -0700
  • FW: ASCE wind on parapets Mon, 8 Dec 2008 16:42:52 -0700
  • RE: IBC Wed, 10 Dec 2008 08:36:50 -0700
  • RE: Slab on grade Fri, 7 Nov 2008 11:50:37 -0700
  • RE: Slab on grade Fri, 7 Nov 2008 11:57:32 -0700
  • RE: IBC v IRC Fri, 19 Dec 2008 12:06:30 -0700
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:04:37 -0700

• jatech
  • Re: RE: Full Pen Weld at Channel Tue, 14 Oct 2008 16:36:39 -0600
  • Re: RE: Full Pen Weld at Channel Mon, 13 Oct 2008 16:52:15 -0600

• Jeff Coronado
  • Christmas Greetings! Tue, 23 Dec 2008 20:33:13 -0700

• Jeff Smith
  • RE: Wind load on sloped roof with parapet Thu, 4 Dec 2008 10:13:24 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 12:40:40 -0700
  • RE: R values for vertical combinations exceptions Thu, 2 Oct 2008 10:42:54 -0600
  • RE: Wind Load on Wood Fence Wed, 17 Dec 2008 19:04:15 -0700
  • RE: Wind Load on Wood Fence Wed, 17 Dec 2008 19:16:48 -0700
  • edge barriers in parking structures Mon, 3 Nov 2008 10:25:30 -0700
  • RE: Radiant Floor System on Plywood Subfloor Mon, 22 Dec 2008 20:36:13 -0700
  • RE: Retaining Wall Design Practice (Seismic) Tue, 11 Nov 2008 20:44:24 -0700
  • R values for vertical combinations exceptions Thu, 2 Oct 2008 10:00:04 -0600
  • RE: 1973 UBC DF/L design values Sun, 26 Oct 2008 13:17:32 -0600
  • Wind Load on Wood Fence Wed, 17 Dec 2008 18:43:59 -0700
  • Wind Load Topographic Effects Mon, 29 Dec 2008 12:22:51 -0700
  • RE: Residential garage floor live load Sun, 2 Nov 2008 12:31:35 -0700
  • Wind load on sloped roof with parapet Sun, 30 Nov 2008 14:28:59 -0700
  • RE: Wind load on sloped roof with parapet Mon, 1 Dec 2008 15:22:42 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 12:31:09 -0700

• Jeffrey T Flansburg
  • 1973 UBC DF/L design values Fri, 24 Oct 2008 09:20:16 -0600

• Jeremy White
  • Snow Drift From Higher Structure Wed, 19 Nov 2008 10:06:02 -0700

• Jerry Coombs
  • Re: Slab on grade Fri, 7 Nov 2008 11:45:40 -0700
  • Re: Hollow Core Design Tue, 7 Oct 2008 06:07:59 -0600
  • Re: Seismic Charges Thu, 2 Oct 2008 06:54:48 -0600
  • RE: Slab on grade Fri, 7 Nov 2008 11:55:28 -0700
  • Re: Advertizing one's absence Wed, 1 Oct 2008 09:56:37 -0600
  • Re: Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 13:14:54 -0600
  • Re: ACI 318-08 Section 14.8 Alternate Design of Slender Walls Wed, 29 Oct 2008 07:37:36 -0600

• Jim Getaz
  • Re: Off-Topic- Greetings and best wishes Wed, 5 Nov 2008 05:28:58 -0700
  • Re: Residential garage floor live load Mon, 3 Nov 2008 05:46:45 -0700
  • Re: : Jurisdictions That REQUIRE Engineer's Observations Thu, 30 Oct 2008 05:50:10 -0600
  • RE: Wind Load on Wood Fence Fri, 19 Dec 2008 05:50:14 -0700
  • Was RE: Damping percentage Now Seaint Reputation Wed, 1 Oct 2008 06:25:02 -0600
  • foundation and slab for houses affected by fire Fri, 12 Dec 2008 06:21:41 -0700

• Jim Lutz
  • Limit on Pour Height Wed, 19 Nov 2008 09:29:47 -0700

• Jim Wilson
  • HUD guidelines for stick built homes? Fri, 12 Dec 2008 11:39:09 -0700

• Jnapd
  • Re: Roof height for A-Frame Mon, 10 Nov 2008 21:18:30 -0700
  • Re: STRESS AND FORCE Mon, 17 Nov 2008 02:21:54 -0700
  • Re: Wind Load Topographic Effects Tue, 30 Dec 2008 16:11:14 -0700
  • Re: Rammed earth construction Tue, 4 Nov 2008 14:11:11 -0700
  • Re: Wind forces Fri, 19 Dec 2008 14:08:54 -0700
  • Re: Wind Load Topographic Effects Wed, 31 Dec 2008 13:12:35 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 16:02:06 -0700
  • Re: Seismic Loads in Ceiling Mon, 22 Dec 2008 09:53:27 -0700
  • Re: Horizontal Irregularities Tue, 4 Nov 2008 17:52:25 -0700
  • Re: Seismic Loads in Ceiling Mon, 22 Dec 2008 10:49:47 -0700
  • Re: Limit on pour height? Tue, 18 Nov 2008 09:57:30 -0700
  • Re: Wood testing Tue, 23 Dec 2008 11:02:47 -0700

• Joe Goldbronn
  • ASCE wind on parapets Mon, 8 Dec 2008 14:36:12 -0700
  • RE: FW: ASCE wind on parapets Mon, 8 Dec 2008 18:10:59 -0700

• John J. Treff
  • Wind Loading Reference Sun, 23 Nov 2008 11:36:10 -0700
  • Concrete Beam with Axial Loading Wed, 26 Nov 2008 16:56:11 -0700

• John Nader
  • Cutting structural steel at site Fri, 31 Oct 2008 06:16:29 -0600

• Jordan Truesdell, PE
  • Elevator load factor. Fri, 31 Oct 2008 09:23:43 -0600
  • Re: Bad Codes Fri, 10 Oct 2008 08:29:38 -0600
  • Re: Jurisdictions That REQUIRE Engineer's Observations Fri, 24 Oct 2008 07:33:32 -0600
  • Re: Buoyancy Tue, 4 Nov 2008 09:22:29 -0700
  • Re: shear flow Tue, 21 Oct 2008 09:14:25 -0600
  • Re: Wall framing with I-Joists Thu, 9 Oct 2008 12:40:36 -0600
  • Re: varying shear flow in concrete beam. Tue, 21 Oct 2008 05:55:23 -0600
  • Re: Twisting of rebar Fri, 7 Nov 2008 10:57:21 -0700
  • Re: Buoyancy Tue, 4 Nov 2008 09:38:40 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 12:25:59 -0700
  • Re: Twisting of rebar Fri, 7 Nov 2008 05:17:55 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 11:40:12 -0700
  • Re: Advertizing one's absence Wed, 1 Oct 2008 05:32:01 -0600

• Joseph Eribarne
  • Load combination 7. .6D+W+H Tue, 4 Nov 2008 09:37:27 -0700

• Joseph R. Grill
  • RE: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 14:32:37 -0600
  • beam col connection at OMF Tue, 28 Oct 2008 09:25:54 -0600
  • RE: Wall framing with I-Joists Thu, 9 Oct 2008 10:23:18 -0600
  • period of straight steel stack Wed, 10 Dec 2008 19:06:08 -0700
  • Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 13:42:09 -0600
  • Support for veneer over openings Thu, 23 Oct 2008 17:24:23 -0600
  • Concrete Bearing Pressure at Base Plates Tue, 18 Nov 2008 13:30:36 -0700
  • Full Pen Weld at Channel Mon, 13 Oct 2008 09:08:10 -0600
  • RE: Full Pen Weld at Channel Mon, 13 Oct 2008 10:32:27 -0600
  • Anchor Bolt Embedments Sat, 6 Dec 2008 09:19:41 -0700
  • RE: Welded Connection at OMF Tue, 28 Oct 2008 11:36:28 -0600
  • Welded Connection at OMF Mon, 27 Oct 2008 16:47:40 -0600
  • RE: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 15:28:00 -0600
  • K distance encroachment Tue, 18 Nov 2008 12:17:00 -0700
  • RE: Is it a Braced Frame or Cantilevered Column? Tue, 14 Oct 2008 11:54:57 -0600
  • RE: K distance encroachment Tue, 18 Nov 2008 14:33:23 -0700
  • RE: RE: Full Pen Weld at Channel Tue, 14 Oct 2008 11:51:57 -0600
  • RE: doubler plates Fri, 21 Nov 2008 11:50:25 -0700
  • RE: Full Pen Weld at Channel Tue, 14 Oct 2008 11:50:22 -0600

• jrc1050
  • SS "slip critical" Mon, 10 Nov 2008 13:29:41 -0700

• jrgrill
  • Re: Support for veneer over openings Thu, 23 Oct 2008 18:04:46 -0600

• Kashyap
  • Re: Finite Element Analysis Tue, 28 Oct 2008 00:15:50 -0600

• Ken Loush
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 11:34:17 -0700

• ken ng
  • Residential garage floor live load Sun, 2 Nov 2008 09:16:40 -0700
  • Underground tank Sun, 16 Nov 2008 20:56:37 -0700
  • Re: Residential garage floor live load >>> Code Sun, 2 Nov 2008 21:45:12 -0700

• Ken Peoples
  • Re: Alloy for high temperature application Wed, 17 Dec 2008 17:06:12 -0700
  • Alloy for high temperature application Mon, 15 Dec 2008 13:16:15 -0700
  • LA CA Geotechnical Engineer Recommendation Mon, 15 Dec 2008 12:33:28 -0700

• Lakshmana Nukala
  • HNY2009 Sun, 28 Dec 2008 12:36:25 -0700

• Larry Hauer
  • [no subject] Tue, 7 Oct 2008 15:51:14 -0600
  • RE: Retaining Wall Design Practice (Seismic) Tue, 11 Nov 2008 19:26:00 -0700
  • OCBF Requirements Thu, 20 Nov 2008 18:11:30 -0700
  • Steel Moment Frames per ASCE 7-05 Tue, 7 Oct 2008 15:50:30 -0600
  • RE: Steel Moment Frames per ASCE 7-05 Wed, 8 Oct 2008 09:58:55 -0600
  • RE: Horizontal Irregularities Tue, 4 Nov 2008 08:22:42 -0700

• Lloyd Pack
  • Re: Wall framing with I-Joists Thu, 9 Oct 2008 00:41:04 -0600

• m sh
  • Special Concrete Shear Walls Thu, 18 Dec 2008 12:51:05 -0700

• Mark D. Baker
  • RE: 1.2 stress increase Mon, 17 Nov 2008 13:41:30 -0700
  • RE: 1.2 stress increase Mon, 17 Nov 2008 17:28:16 -0700
  • RE: Seismic Factors for Soil Nail Walls Fri, 17 Oct 2008 12:41:39 -0600
  • 1.2 stress increase Sun, 16 Nov 2008 22:37:54 -0700
  • RE: Curved GluLam tie Mon, 13 Oct 2008 11:28:54 -0600
  • RE: 1.2 stress increase Mon, 17 Nov 2008 13:39:09 -0700

• Mark Gilligan
  • Re: RE: Full Pen Weld at Channel Wed, 15 Oct 2008 00:20:43 -0600
  • Re: Jurisdictions That REQUIRE Engineer's Observations Wed, 29 Oct 2008 00:07:43 -0600

• Marlou Rodriguez
  • Square notch on wf beams Wed, 17 Dec 2008 18:16:02 -0700

• Martin Li
  • RE: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 12:36:26 -0700
  • RE: Flush Moment end plate connections Fri, 14 Nov 2008 15:12:47 -0700

• Matthew J Tobolski
  • RE: OSHPD SCBF's using HSS Braces Wed, 15 Oct 2008 17:06:24 -0600

• Micayas, Julius
  • RE: Finite Element Analysis Mon, 27 Oct 2008 11:14:52 -0600

• Michael Gregory
  • Wood wall sheathing Fri, 7 Nov 2008 09:51:02 -0700

• Michael Hemstad
  • Rammed earth construction Fri, 31 Oct 2008 10:20:36 -0600

• Michael Laplante
  • RE: shear flow Tue, 21 Oct 2008 08:59:36 -0600
  • RE: Packing peanuts? Wed, 29 Oct 2008 15:32:49 -0600
  • varying shear flow in concrete beam. Mon, 20 Oct 2008 14:06:04 -0600
  • RE: friction angle of saturated soil. Mon, 15 Dec 2008 06:53:59 -0700
  • friction angle of saturated soil. Thu, 11 Dec 2008 13:10:34 -0700

• Michael Liew
  • Re: FW: ASCE wind on parapets Mon, 8 Dec 2008 17:42:21 -0700
  • Wood SW compression check. Fri, 14 Nov 2008 15:06:27 -0700
  • Fwd: Compression check Fri, 14 Nov 2008 12:19:33 -0700
  • Re: ASCE wind on parapets Mon, 8 Dec 2008 15:42:39 -0700

• Michel
  • Re: iCrete? Tue, 28 Oct 2008 07:59:34 -0600

• Michel Blangy
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 10:11:16 -0700
  • RE: LA CA Geotechnical Engineer Recommendation Mon, 15 Dec 2008 14:10:05 -0700
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:09:10 -0700
  • RE: Radiant Floor System on Plywood Subfloor Mon, 22 Dec 2008 15:28:35 -0700
  • RE: Reindeer live load Mon, 29 Dec 2008 09:54:31 -0700
  • Radiant Floor System on Plywood Subfloor Mon, 22 Dec 2008 13:59:56 -0700
  • RE: Inground Pool Design Mon, 8 Dec 2008 10:35:56 -0700
  • Inground Pool Design Mon, 8 Dec 2008 09:56:23 -0700
  • RE: Radiant Floor System on Plywood Subfloor Tue, 23 Dec 2008 10:27:26 -0700
  • RE: Radiant Floor System on Plywood Subfloor Tue, 23 Dec 2008 09:10:33 -0700
  • Diaphragm Continuity at Continuous Ridge Vents Mon, 27 Oct 2008 10:49:01 -0600
  • RE: Bad Codes Thu, 2 Oct 2008 10:28:24 -0600
  • Tree & Branch Analysis Fri, 19 Dec 2008 10:29:44 -0700

• Mike Jones
  • Re: Arkansas Wed, 3 Dec 2008 05:39:35 -0700
  • Re: seismic forces Tue, 25 Nov 2008 07:47:59 -0700

• Murvin Ragaven
  • Can anybody answer this? Wed, 5 Nov 2008 22:02:11 -0700

• nat mohanram
  • Reminder: Please Respond to nat's Invitation Thu, 25 Dec 2008 03:14:23 -0700
  • nat mohanram sent you a Friend Request on Yaari Mon, 22 Dec 2008 03:13:23 -0700

• Nguyen, Phuong
  • ASCE 7-05 and IBC 06 Mon, 22 Dec 2008 15:58:13 -0700

• Nittsi
  • Prestressing documents related to Cable Stayed Bridge Project Mon, 8 Dec 2008 08:41:06 -0700
  • Removal of formwork for Vertical member Tue, 30 Dec 2008 08:38:23 -0700
  • Re: RE: Prestressing documents related to Cable Stayed Bridge Project Tue, 9 Dec 2008 09:35:10 -0700

• Oz Oz
  • Collision Load for Highway Bridges Tue, 18 Nov 2008 00:25:52 -0700
  • Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 05:25:27 -0700

• Padmanabhan Rajendran
  • Geotech contractors Thu, 2 Oct 2008 16:21:37 -0600
  • RE: Sg rods at purlins Fri, 14 Nov 2008 13:24:51 -0700

• Paul Blomberg
  • Re: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 12:36:04 -0700
  • Alaska Arctic Engineering Courses Tue, 9 Dec 2008 09:34:06 -0700
  • Re: Alaska Arctic Engineering Courses Wed, 10 Dec 2008 08:04:04 -0700
  • Building Code and Other National Standards Mon, 22 Dec 2008 12:10:53 -0700

• Paul Feather
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 16:53:34 -0700
  • Retaining Wall Design Practice (Seismic) Mon, 10 Nov 2008 15:32:55 -0700
  • RE: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 09:53:34 -0600
  • RE: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 10:19:33 -0700
  • RE: Slab on grade Mon, 10 Nov 2008 11:44:39 -0700
  • RE: Tall CMU Core Divider Wall Thu, 20 Nov 2008 11:51:19 -0700
  • RE: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 12:54:48 -0700

• Paul Guthrie
  • Re: varying shear flow in concrete beam. Tue, 21 Oct 2008 09:21:02 -0600

• Paul Ransom
  • Re: Bad Codes Fri, 3 Oct 2008 06:14:38 -0600
  • Re: Sg rods at purlins Fri, 14 Nov 2008 22:10:35 -0700

• Phil Doody
  • RE: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 16:04:59 -0700
  • Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 15:00:42 -0700
  • RE: Soldier Beam Retaining Wall Design Practice Tue, 11 Nov 2008 14:52:43 -0700

• Pinyon Engineering
  • RE: Wall framing with I-Joists Fri, 10 Oct 2008 16:15:44 -0600
  • RE: Wind Load on Wood Fence Fri, 19 Dec 2008 10:24:20 -0700
  • RE: Wall framing with I-Joists Fri, 10 Oct 2008 12:11:44 -0600

• rahman shahshenas
  • ETABS _ General Section Wed, 8 Oct 2008 02:35:04 -0600

• Ralph Kratz
  • Re: Happy Holidays Wed, 24 Dec 2008 13:53:41 -0700
  • Re: Jurisdictions That REQUIRE Engineer's Observations Thu, 23 Oct 2008 14:00:53 -0600

• Rand W Holtham
  • Flush Moment end plate connections Fri, 14 Nov 2008 13:39:28 -0700
  • RE: OCBF Requirements Mon, 24 Nov 2008 10:17:53 -0700
  • RE: Flush Moment end plate connections Wed, 19 Nov 2008 12:51:34 -0700
  • RE: Flush Moment end plate connections Wed, 19 Nov 2008 11:36:15 -0700

• raymond shreenan
  • Re: Seismic Loads in Ceiling Wed, 24 Dec 2008 16:30:43 -0700
  • Merry Christmas Wed, 24 Dec 2008 16:17:17 -0700

• refugio rochin
  • RE: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 19:26:55 -0700
  • Re: varying shear flow in concrete beam. Tue, 21 Oct 2008 16:04:42 -0600
  • Re: Wind Load Topographic Effects Wed, 31 Dec 2008 03:32:37 -0700
  • RE: Seismic Factors for Soil Nail Walls Fri, 17 Oct 2008 13:33:05 -0600
  • Re: Wind Load Topographic Effects Tue, 30 Dec 2008 15:58:10 -0700
  • Seismic Factors for Soil Nail Walls Fri, 17 Oct 2008 10:34:36 -0600

• Reza Dashti Asl
  • Stainless Steel Wire hangers for indoor pool Tue, 14 Oct 2008 11:37:34 -0600
  • Stainless Steel Wire Hangers for indoor pool Fri, 10 Oct 2008 14:11:25 -0600
  • RE: Sg rods at purlins Fri, 14 Nov 2008 10:38:48 -0700

• Rhkratzse
  • Re: Wind Load on Wood Fence Wed, 17 Dec 2008 19:08:29 -0700
  • Re: Slab on grade Fri, 7 Nov 2008 17:26:54 -0700
  • Re: Wind Load on Wood Fence Thu, 18 Dec 2008 09:50:41 -0700
  • Re: Wind Load on Wood Fence Thu, 18 Dec 2008 09:58:20 -0700
  • Re: Wind force -- codes, building design, officials, etc. Fri, 19 Dec 2008 14:08:59 -0700
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 15:03:26 -0700
  • Re: Retaining Wall Design Practice (Seismic) Tue, 11 Nov 2008 09:14:20 -0700
  • Re: Retaining Wall Design Practice (Seismic) Mon, 10 Nov 2008 16:31:19 -0700
  • Re: Off-Topic- Greetings and best wishes Tue, 4 Nov 2008 14:59:49 -0700
  • Re: Collision Load for Highway Bridges Wed, 19 Nov 2008 08:51:19 -0700
  • Re: Residential garage floor live load >>> Code Sun, 2 Nov 2008 14:02:18 -0700
  • Re: Wind Load on Wood Fence Wed, 17 Dec 2008 19:34:34 -0700
  • Re: Wind Load on Wood Fence Wed, 17 Dec 2008 19:29:35 -0700
  • Re: Wind forces Thu, 18 Dec 2008 15:45:00 -0700
  • Re: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 15:23:49 -0700
  • Re: Green Roof Live Loads Tue, 4 Nov 2008 14:57:02 -0700
  • Re: Soldier Beam Retaining Wall Design Practice Tue, 11 Nov 2008 13:46:13 -0700
  • Re: Wind Load on Wood Fence Thu, 18 Dec 2008 13:13:39 -0700
  • Re: Slab on grade >>> Sunday! Sun, 9 Nov 2008 16:58:53 -0700

• Rich Lewis
  • Seismic Charges Wed, 1 Oct 2008 20:40:14 -0600
  • Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 11:32:11 -0600
  • Topped Hollow Core Slab and CMU Wall Construction Fri, 26 Dec 2008 19:07:28 -0700

• Rick
  • Re: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 18:14:32 -0700
  • Re: Jurisdictions That REQUIRE Engineer's Observations Thu, 23 Oct 2008 15:46:07 -0600

• Robert Kubena
  • RE: Corrosion Protection for long-term non-cast rebars Tue, 2 Dec 2008 13:04:26 -0700

• sadanand_ojha
  • Modeling of soil with superstructure Mon, 3 Nov 2008 21:13:47 -0700
  • How to get out of this blog Sat, 20 Dec 2008 21:15:41 -0700
  • Re: Concrete Beam with Axial Loading Thu, 27 Nov 2008 23:04:50 -0700

• SCHFUN
  • Wood testing Tue, 23 Dec 2008 10:15:58 -0700

• Scott Maxwell
  • Re: Topped Hollow Core Slab and CMU Wall Construction Fri, 26 Dec 2008 20:03:33 -0700
  • RE: Bad Codes Thu, 9 Oct 2008 09:20:52 -0600
  • RE: Bad Codes Thu, 2 Oct 2008 13:44:02 -0600
  • RE: Bad Codes Fri, 10 Oct 2008 12:37:01 -0600
  • RE: depth of footing above bottom reinforcement Sun, 2 Nov 2008 21:55:49 -0700
  • RE: 12" frame walls Wed, 8 Oct 2008 12:19:45 -0600
  • Re: Slab on grade >>> Sunday! Mon, 10 Nov 2008 13:26:15 -0700

• Scott, William N
  • RE: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:06:26 -0700
  • RE: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:08:18 -0700

• seaint04
  • Seismic Design of Nitrogen Storage Tank Tue, 4 Nov 2008 10:03:54 -0700
  • Re: Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 15:23:32 -0600
  • Re: Seismic Design of Nitrogen Storage Tank Tue, 4 Nov 2008 15:02:22 -0700

• SGE Structural
  • Re: Collision Load for Highway Bridges Wed, 19 Nov 2008 09:21:50 -0700
  • Re: Slab on grade Mon, 10 Nov 2008 11:33:01 -0700
  • Re: Retaining Wall Design Practice (Seismic) Mon, 10 Nov 2008 17:06:13 -0700
  • Re: period of straight steel stack Wed, 10 Dec 2008 21:03:10 -0700
  • Re: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 16:31:14 -0700
  • seismic forces Mon, 24 Nov 2008 13:20:26 -0700
  • Re: Limit on pour height? Tue, 18 Nov 2008 11:14:19 -0700
  • Re: seismic forces Mon, 24 Nov 2008 15:47:14 -0700
  • Re: seismic forces Tue, 25 Nov 2008 10:39:18 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 19:09:07 -0700
  • Re: Soldier Beam Retaining Wall Design Practice Mon, 10 Nov 2008 17:59:18 -0700
  • Re: Collision Load for Highway Bridges Wed, 19 Nov 2008 08:01:34 -0700
  • Re: Old Steel Sections Thu, 11 Dec 2008 15:44:35 -0700
  • STRESS AND FORCE Thu, 13 Nov 2008 10:30:58 -0700
  • Re: Retaining Wall Design Practice (Seismic) Mon, 10 Nov 2008 15:53:01 -0700
  • Re: STRESS AND FORCE Thu, 13 Nov 2008 12:05:43 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 13:35:11 -0700
  • Re: Wind Loading Reference Sun, 23 Nov 2008 12:49:42 -0700

• sscholl2(--nospam--at)juno.com
  • Re: Jurisdictions That REQUIRE Engineer's Observations Thu, 30 Oct 2008 14:58:17 -0600
  • Re: public works projects Sun, 7 Dec 2008 19:12:30 -0700
  • Re: Jurisdictions That REQUIRE Engineer's Observations Fri, 24 Oct 2008 10:17:15 -0600
  • Re: Southern Calif residential Engineers Tue, 11 Nov 2008 19:13:41 -0700
  • Re: foundation and slab for houses affected by fire Thu, 11 Dec 2008 12:23:24 -0700
  • RE: Collision Load for Highway Bridges Tue, 18 Nov 2008 23:47:20 -0700
  • RE: Wall framing with I-Joists Fri, 10 Oct 2008 12:59:56 -0600
  • Re: Wall framing with I-Joists Thu, 9 Oct 2008 14:54:21 -0600

• Stan Caldwell
  • Re: Water Bag Load Testing Fri, 14 Nov 2008 19:39:20 -0700

• Steiner, Matthew
  • Re: seaint Digest for 18 Oct 2008 Sun, 19 Oct 2008 06:51:46 -0600
  • Re: seaint Digest for 18 Oct 2008 Sun, 19 Oct 2008 06:52:27 -0600

• Steve
  • Re: Square notch on wf beams Wed, 17 Dec 2008 19:28:38 -0700

• Steve Gordin
  • Re: Slab on grade Fri, 7 Nov 2008 13:00:42 -0700
  • Re: Twisting of rebar Thu, 6 Nov 2008 09:06:14 -0700
  • Re: Bad Codes Thu, 2 Oct 2008 09:07:07 -0600
  • Re: Twisting of rebar Thu, 6 Nov 2008 12:42:53 -0700
  • Re: Seismic Design of Nitrogen Storage Tank Tue, 4 Nov 2008 16:14:25 -0700
  • stemwall cutting Wed, 1 Oct 2008 21:48:31 -0600
  • Re: Seismic Charges Wed, 1 Oct 2008 21:35:02 -0600
  • Re: Twisting of rebar Fri, 7 Nov 2008 09:27:22 -0700
  • Re: Seismic Design of Nitrogen Storage Tank Tue, 4 Nov 2008 11:22:40 -0700
  • Re: Residential garage floor live load Sun, 2 Nov 2008 21:45:45 -0700
  • Re: Advertizing one's absence Wed, 1 Oct 2008 10:57:13 -0600
  • coordinates Fri, 7 Nov 2008 10:50:28 -0700

• Stuart, Matthew
  • RE: ACI 318-08 Section 14.8 Alternate Design of Slender Walls Tue, 28 Oct 2008 17:03:30 -0600
  • Water Bag Load Testing Fri, 14 Nov 2008 07:36:42 -0700
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 11:38:58 -0700
  • RE: Water Bag Load Testing Mon, 17 Nov 2008 13:12:08 -0700
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 09:40:01 -0700
  • RE: Old Gypsum Bulb Tee Roof System Tue, 7 Oct 2008 15:51:08 -0600
  • FL PE Board Wed, 31 Dec 2008 12:25:13 -0700

• Tarek Mokhtar
  • RE: Seismic Loads in Ceiling Mon, 22 Dec 2008 11:26:50 -0700
  • Re: Limit on pour height? Tue, 18 Nov 2008 10:50:42 -0700
  • RE: More Plywood Diaphragm's Thu, 6 Nov 2008 11:02:28 -0700
  • Re: Wind forces Thu, 18 Dec 2008 15:15:12 -0700

• Tejas Gajjar
  • Re: Inground Pool Design Thu, 11 Dec 2008 10:05:23 -0700

• Tejas Goshalia
  • When wind governs with No Seismic Sun, 26 Oct 2008 20:18:20 -0600

• Thor Matteson
  • RE: Wind Load on Wood Fence Fri, 19 Dec 2008 09:03:04 -0700
  • Job referral in East SF Bay Area Sun, 19 Oct 2008 09:25:59 -0600

• Thor Tandy
  • RE: Rammed earth construction Fri, 31 Oct 2008 10:41:20 -0600
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 11:13:32 -0700
  • RE: Moment Frame Lateral Restraint/Location Fri, 3 Oct 2008 15:06:52 -0600
  • RE: Rammed earth construction Fri, 31 Oct 2008 10:38:46 -0600
  • RE: Rammed earth construction Tue, 4 Nov 2008 11:00:16 -0700
  • RE: Wind Load on Wood Fence Thu, 18 Dec 2008 10:31:14 -0700
  • RE: Snow Drift From Higher Structure Wed, 19 Nov 2008 10:22:09 -0700

• Tom . Hunt
  • RE: OCBF Requirements Mon, 24 Nov 2008 07:49:18 -0700
  • RE: seismic forces Mon, 24 Nov 2008 15:40:54 -0700
  • Re: Modeling of soil with superstructure Tue, 4 Nov 2008 08:00:10 -0700
  • RE: depth of footing above bottom reinforcement Fri, 31 Oct 2008 16:31:51 -0600
  • happy new year Wed, 31 Dec 2008 08:00:19 -0700
  • Re: Removal of formwork for Vertical member Tue, 30 Dec 2008 09:38:11 -0700
  • Re: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 15:10:23 -0600
  • RE: depth of footing above bottom reinforcement Wed, 29 Oct 2008 16:05:24 -0600
  • Re: Building Code and Other National Standards Mon, 22 Dec 2008 12:22:44 -0700
  • Re: Cost Effective Mechanical Lap Splice? Wed, 3 Dec 2008 16:29:50 -0700
  • Re: 2007 CBC Section 1805.7.2.1 Wed, 29 Oct 2008 17:08:26 -0600
  • RE: Progressive collapse Mon, 24 Nov 2008 14:42:22 -0700
  • Happy new year. Wed, 31 Dec 2008 08:00:42 -0700
  • RE: Flush Moment end plate connections Mon, 17 Nov 2008 13:06:35 -0700
  • Re: Cutting structural steel at site Fri, 31 Oct 2008 16:18:07 -0600
  • Re: Limit on pour height? Tue, 18 Nov 2008 12:13:47 -0700
  • RE: Bad Codes Fri, 3 Oct 2008 07:55:34 -0600
  • Re: Min. and Max. weld lengths Mon, 3 Nov 2008 10:56:30 -0700
  • RE: Min. and Max. weld lengths - Slight Typo Mon, 3 Nov 2008 11:24:45 -0700
  • Re: Welded Connection at OMF Tue, 28 Oct 2008 11:15:42 -0600
  • Re: Twisting of rebar Thu, 6 Nov 2008 09:15:35 -0700
  • Wall framing with I-Joists Tue, 7 Oct 2008 13:51:42 -0600
  • Re: Geotech contractors Thu, 2 Oct 2008 16:30:17 -0600
  • Structural Engineer on FRINGE Wed, 19 Nov 2008 08:29:25 -0700
  • Re: Retaining Wall Design Practice (Seismic) Mon, 10 Nov 2008 17:02:25 -0700
  • Re: Alaska Arctic Engineering Courses Tue, 9 Dec 2008 10:35:52 -0700
  • Re: Full Pen Weld at Channel Mon, 13 Oct 2008 10:01:38 -0600
  • Re: Moment Resisting Frame Mon, 8 Dec 2008 09:37:59 -0700
  • Happy Holidays Wed, 24 Dec 2008 11:29:12 -0700
  • Re: Seismic Factors for Soil Nail Walls Fri, 17 Oct 2008 11:08:33 -0600
  • RE: ACI 318-08 Section 14.8 Alternate Design of Slender Walls Wed, 29 Oct 2008 07:49:37 -0600
  • RE: 1.2 stress increase Mon, 17 Nov 2008 13:08:11 -0700

• Tom Skaggs
  • RE: Citing Publications In Your Technical Writing Thu, 2 Oct 2008 14:35:11 -0600
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 08:23:58 -0700
  • RE: Wood wall sheathing Fri, 7 Nov 2008 10:26:28 -0700
  • RE: Water Bag Load Testing Fri, 14 Nov 2008 10:21:43 -0700

• Wesley Werner
  • RE: Fuse type fasteners Tue, 21 Oct 2008 10:31:02 -0600
  • RE: K distance encroachment Tue, 18 Nov 2008 14:04:51 -0700
  • Green Roof Live Loads Tue, 4 Nov 2008 14:51:03 -0700
  • RE: Elevator load factor. Fri, 31 Oct 2008 09:29:38 -0600
  • RE: Bad Codes Fri, 3 Oct 2008 06:41:45 -0600
  • RE: Green Roof Live Loads Wed, 5 Nov 2008 06:12:20 -0700
  • Steel Deck Cantilevers Fri, 3 Oct 2008 16:01:51 -0600

• William Haynes
  • Re: Roof height for A-Frame Tue, 11 Nov 2008 10:27:02 -0700
  • Re: Slab on grade Sat, 8 Nov 2008 18:14:56 -0700
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 12:32:04 -0700
  • Re: Snow Drift From Higher Structure Wed, 19 Nov 2008 10:33:46 -0700
  • Re: Upward load on slabs per UFC 4-023-03 Thu, 20 Nov 2008 18:04:30 -0700
  • Re: Arkansas Wed, 3 Dec 2008 11:17:15 -0700
  • Re: Slab on grade Mon, 10 Nov 2008 11:14:10 -0700
  • Re: Green Roof Live Loads Wed, 5 Nov 2008 06:31:09 -0700
  • Re: hollow core details Tue, 7 Oct 2008 10:41:28 -0600
  • Re: 1.2 stress increase Mon, 17 Nov 2008 07:46:29 -0700
  • Hollow Core Design Mon, 6 Oct 2008 18:52:59 -0600
  • Re: Tall CMU Core Divider Wall Thu, 20 Nov 2008 11:57:03 -0700
  • Re: fall protection systems Wed, 5 Nov 2008 09:43:22 -0700
  • Re: More Plywood Diaphragm's Thu, 6 Nov 2008 08:03:16 -0700
  • Re: Twisting of rebar Thu, 6 Nov 2008 08:57:42 -0700
  • Re: Sg rods at purlins Fri, 14 Nov 2008 17:23:27 -0700
  • Re: Load combination 7. .6D+W+H Wed, 5 Nov 2008 12:32:34 -0700
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 16:47:54 -0700
  • Re: More Plywood Diaphragm ?'s Thu, 6 Nov 2008 06:36:51 -0700
  • Re: Slab on grade Mon, 10 Nov 2008 08:38:37 -0700
  • Re: Roof height for A-Frame Tue, 11 Nov 2008 19:13:34 -0700
  • Re: OCBF Requirements Thu, 20 Nov 2008 18:37:22 -0700
  • Re: STRESS AND FORCE Fri, 14 Nov 2008 08:03:50 -0700
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 13:39:07 -0700
  • Tall CMU Core Divider Wall Thu, 20 Nov 2008 10:12:17 -0700
  • Re: Slab on grade Mon, 10 Nov 2008 06:27:34 -0700
  • Re: Horizontal Irregularities Mon, 3 Nov 2008 12:52:32 -0700
  • Re: Min. and Max. weld lengths Mon, 3 Nov 2008 12:07:16 -0700
  • Re: Load combination 7. .6D+W+H Tue, 4 Nov 2008 10:05:58 -0700
  • Re: Green Roof Live Loads Tue, 4 Nov 2008 15:43:36 -0700
  • Glazing Blast Loads Fri, 14 Nov 2008 17:54:40 -0700

• William.Sherman
  • RE: Building Code and Other National Standards Mon, 22 Dec 2008 12:33:52 -0700
  • RE: Jurisdictions That REQUIRE Engineer's Observations Tue, 28 Oct 2008 10:14:37 -0600

• WISH DENNIS
  • Re: Wall framing with I-Joists Thu, 9 Oct 2008 11:33:17 -0600

• y.hamida
  • Re: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 14:21:37 -0600
  • Re: Green Roof Live Loads Wed, 5 Nov 2008 01:58:44 -0700
  • Re: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 15:23:25 -0600
  • Re: Is it a Braced Frame or Cantilevered Column? Mon, 13 Oct 2008 14:20:05 -0600
  • Re: Finite Element Analysis Mon, 27 Oct 2008 13:52:47 -0600

• Yi Yang
  • RE: Wall framing with I-Joists Thu, 9 Oct 2008 12:27:01 -0600
  • Wall framing with I-Joists Tue, 7 Oct 2008 13:07:41 -0600
  • RE: Load combination 7. .6D+W+H Tue, 4 Nov 2008 10:46:18 -0700
  • RE: Rammed earth construction Fri, 31 Oct 2008 10:37:21 -0600
  • RE: Rammed earth construction Mon, 3 Nov 2008 18:07:58 -0700
  • RE: Rammed earth construction Tue, 4 Nov 2008 10:39:44 -0700

• Yousefi, Ben
  • RE: 1.2 stress increase Mon, 17 Nov 2008 13:04:07 -0700
  • RE: Flush Moment end plate connections Mon, 17 Nov 2008 12:50:05 -0700
  • RE: ACI 318-08 Section 14.8 Alternate Design of Slender Walls Tue, 28 Oct 2008 18:05:50 -0600
  • RE: OCBF Requirements Thu, 20 Nov 2008 18:30:08 -0700

---

Mail converted by MHonArc