Return to index: [Subject] [Thread] [Date] [Author]
RE:
[Subject Prev][Subject Next][Thread Prev][Thread Next]- To: <seaint(--nospam--at)seaint.org>
- Subject: RE:
- From: "Polhemus, Bill" <BPolhemus(--nospam--at)wje.com>
- Date: Wed, 9 Aug 2006 12:22:58 -0500
|
Personally, I think that was probably
smart. And if there was a problem with dissimilar metals between the unfinished
steel and the galvanizing on the bolts, wouldn’t that be true for the zinc
and the “raw” bolt material beneath? (I admit ignorance). From: Ken E. Paquette
[mailto:KEP(--nospam--at)brph.com] Does anyone know of any problems concerning the use of
mechanically galvanized bolts with raw unfinished steel to be spray on
fire-proofed. For simplicity on a complicated project we called for
mechanically galvanized bolts everywhere instead of getting surprised during
construction as to where the galvanized bolts are actually installed. Thanks Kenneth Paquette P.E. |
- Follow-Ups:
- Re: Galv bolts with bare steel
- From: Jordan Truesdell, PE
- Re: Galv bolts with bare steel
- Prev by Subject: [no subject]
- Next by Subject: [no subject]
- Previous by thread: [no subject]
- Next by thread: Re: Galv bolts with bare steel
- About this archive
- Messages sorted by: [Subject][Thread][Author][Date]