Return to index: [Subject] [Thread] [Date] [Author]
Re: Post-Tensioning Repair
[Subject Prev][Subject Next][Thread Prev][Thread Next]- To: seaint(--nospam--at)seaint.org
- Subject: Re: Post-Tensioning Repair
- From: Scott Maxwell <smaxwell(--nospam--at)engin.umich.edu>
- Date: Thu, 30 Jun 2005 18:47:35 -0400 (EDT)
One should note, that a subscription for someone outside the US is $90 (I believe). If you are interested, then the link that Gail gave will take to the magazine's website where you can fillout a subscription form. For those in the US and who are members of one of NCSEA's member organizations (one of the many SEAs around the county), a "designated" member of company that is a member of CASE (i.e. your company "lists" you as an employee, etc under their CASE membership), or is an individual member of SEI, then you get a subscription for free. HTH, Scott Adrian, MI On Thu, 30 Jun 2005 gskwy(--nospam--at)aol.com wrote: > The magazine is available to everyone at: www.structuremag.org > > -----Original Message----- > From: j.n.sigalas <sigalasi(--nospam--at)central.ntua.gr> > To: seaint(--nospam--at)seaint.org > Sent: Thu, 30 Jun 2005 18:19:49 +0300 > Subject: Re: Post-Tensioning Repair > > > Gail, > Please advise if article can be downloaded from some site. > This would be quite usefull for non U.S members of this list. > regards > j.n.sigalas > ----- Original Message ----- > From: gskwy(--nospam--at)aol.com > To: seaint(--nospam--at)seaint.org > Sent: Wednesday, June 29, 2005 4:06 PM > Subject: Post-Tensioning Repair > > > For those who are looking for an opportunity to be critical: > > I have an article on post-tensioning repair coming out in the July issue of Structure magazine, which I think anyone who belongs to an SEA gets. > > If anyone reading it has questions, comments, or criticisms, please feel free to make them known (either publicly or privately.) > > It was intended to be a very basic introduction to post-tensioning repair, but I was somewhat limited by the allowable length. I didn't explain some things very well and I left some important things out, but as it was, the article was about twice as long as they told me to make it. > > I can address comments, questions, and criticisms in a second article. > > > Gail Kelley > ******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********
- References:
- Post-Tensioning Repair
- From: gskwy
- Re: Post-Tensioning Repair
- From: j.n.sigalas
- Re: Post-Tensioning Repair
- From: gskwy
- Post-Tensioning Repair
- Prev by Subject: Re: Post-Tensioning Repair
- Next by Subject: Poured in Place Slab vs. Raised Floor
- Previous by thread: Re: Post-Tensioning Repair
- Next by thread: FW: Steel-Detail: Flexible wind moments
- About this archive
- Messages sorted by: [Subject][Thread][Author][Date]