Return to index: [Subject] [Thread] [Date] [Author]
RE: 1/2" or 5/8" SS machine bolts
[Subject Prev][Subject Next][Thread Prev][Thread Next]- To: "'seaint(--nospam--at)seaint.org'" <seaint(--nospam--at)seaint.org>
- Subject: RE: 1/2" or 5/8" SS machine bolts
- From: "Armijo, John J (PWCSD 420)" <ArmijoJJ(--nospam--at)PWCSD.NAVY.MIL>
- Date: Fri, 7 Mar 2003 10:04:47 -0800
|
See if
any of these will help:
-----Original Message-----
From: Ken Peoples [mailto:kspeoples(--nospam--at)lvta.net] Sent: Friday, March 07, 2003 7:26 AM To: Seaint Cc: Steel Detail Subject: 1/2" or 5/8" SS machine bolts I am looking for shear capacities and availability
of 1/2" dia. or 5/8" dia flat head slotted SS machine screws 5/8" long.
McMaster Carr tells me that they only have the 1/2" diameter, 1" long and they
cost about 90 cents each.
They also tell me that the minimum tensile strength
of the 18-8 SS is 80 ksi. If I use AISC's 0.17Fu "for threaded parts
of materials not listed", will I be OK?
Any help is greatly appreciated.
Ken
Kenneth S. Peoples, P. E.
Lehigh Valley Technical Associates, Inc. 1584 Weaversville Road Northampton, PA 18067-9039 Phone: (610) 262-6345 Fax: (610) 262-8188 e-mail: kpeoples(--nospam--at)lvta.net |
- Prev by Subject: 1/2" or 5/8" SS machine bolts
- Next by Subject: Re: 1/2" or 5/8" SS machine bolts
- Previous by thread: Re: Steel-Detail: 1/2" or 5/8" SS machine bolts
- Next by thread: Re: 1/2" or 5/8" SS machine bolts
- About this archive
- Messages sorted by: [Subject][Thread][Author][Date]